Preparation and Microwave Absorption Properties of Glass Beads /Carbon Fiber with Electro Less Ni-Plating

Si Jie Wang; Wei Zhang; Yang Zhao

doi:10.4028/www.scientific.net/AMR.476-478.1125

Paper Titles

Methods of Maintenance Resources Configuration and Optimization for AMS Based on Effectiveness Evaluation
p.1105

Mechanical Design and Dynamics Analysis on a Jumping Robot
p.1112

Synthesis of LiCl Doped Hollow TiO₂ Nanofibers via Electrospinning and Their Humidity-Sensing Properties
p.1116

Near-Infrared Emissions of Sm³⁺ in Li₂O-K₂O-BaO-PbO-Bi₂O₃-Ga₂O₃ Glasses
p.1121

Preparation and Microwave Absorption Properties of Glass Beads /Carbon Fiber with Electro Less Ni-Plating
p.1125

Study on Microstructure and Magnetic Properties of Nitrogen-Annealed Nd-Fe-B Nanocomposite Magnets
p.1130

Novel Single Walled Carbon Nanotube Based Magnetic-Fluorescent Nanohybrids as Dual-Modal MRI/Optical Imaging Probes
p.1134

Microstructure Characterization of Ag Nanoparticles Prepared by Hydrothermal Method
p.1138

Study on Application of Super-Resolution Image Reconstruction Method Used in Video Image Processing
p.1142

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 476-478Preparation and Microwave Absorption Properties of...

Preparation and Microwave Absorption Properties of Glass Beads /Carbon Fiber with Electro Less Ni-Plating

Abstract:

The electroless Ni-Plated technique was used to fabricate the coupled and activated Glass beads /Carbon Fiber. The microstructure of Ni-P-GBs/CFs was analyzed by IR, SEM, EDS, and the microwave absorption properties were characterized by Vector Network Analyzer. The results showed that Ni-p alloy layer is dense and continuous after electro less plating. When the mass ratio is 3:2(GB/CFs), and mass percent of mixed dusty materials is 22.5%, the average loss value is lower than -5 dB in the frequency range of 2～18 GHz, while the greatest loss value is up to -12.4dB in the 15.1 GHz.