Design and Optimization on Connecting Rod Parts of Engineering Clamp Hanger Based on Metamodel

Abstract:

This paper investigates the connecting rod design and optimization of the engineering clamp hanger based on metamodel. The structure of the clamp hanger and the working load status of the connecting rod are firstly analyzed. Then the metamodel theory is applied to the connecting rod design and optimization: The metamodel of the connecting rod is set up in Solid Edge, and the design factors are signed as function-based parameters, with their geometrical relation changeless. The corresponding parameter value can be adopted by case-based inference means so that the required structure model of the connecting rod can be obtained. Finally, keeping the fine strength security and stability, the structure of the connecting rod is optimized. The presented research in this paper offers a new reference and thought for the hanger design and improvement.

• Periodical: Advanced Materials Research (Volumes 479-481)
• Pages: 1845-1850
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.479-481.1845
• Online since: February 2012
• Authors: Huai Bi Zhao
• Keywords: Connecting Rod, Design and Optimization, Engineering Clamp Hanger, Metamodel

References

[1] Wenguang Lang, "Clamp Hanger for Shafts," Micro & Special Motor, No.9 (2007), p.62. (in Chinese)

[2] Zhengping Dong, Weimin Yue, and Jian Wang, "Design of Reactor Pressure Vessel Closure Head Lift for Qinshan Phase II NPP Project," Nuclear Power Engineering, Vol.24, No.2 (2003), pp.198-200. (in Chinese)

[3] Yuqian Xing, "Design and Application of the Cantilever Forklift Hanger," Elevating Machinery, No.4 (2007), pp.15-16. (in Chinese)

[4] Xiaohong Wang, Linmin Xu, and Li Jiang, "Fracture Analysis of ZG270-500 Cast Steel Liftng Instrument," HEAT TREATMENT OF METALS Vol.34, No.9 (2009), pp.96-98. (in Chinese)

[5] Zenbing Xu, Yourong Li, Zhigang Wang, etc., "FEM Analysis on Vertical Coil Tong," Elevating Machinery, No.7 (2005), pp.32-34. (in Chinese)

[6] Chongbo Qi, "Security Improvement of the DGT Port Container Bridge Hanger, Elevating Machinery, No.9 (2007), pp.82-83. (in Chinese)

[7] Lan Jin, "Great Improvement on Container Hangers," China Marine, No.6 (2005), p.47. (in Chinese)

[8] Bingshuang Yang, "Improvement on the Rotary Device of the Tire Container Crane Hanger," Elevating Machinery, No.2 (2003), pp.42-44. (in Chinese)

[9] Pengyun Cheng, and Junrong He, "Improvement of the Transformer Stalloy Hanger," TRANSFORMER, Vol.41, No.6 (2004). (in Chinese)

[10] Yuantao Sun, and Changsheng Xu, "Modeling of Structure Optimization and FEM Calculation for Crane Spreader of Large Bridge Component," Journal of Wuhan University of Tethnology (Transporlalion Science & Engineering), Vol.27, No.6 (2003), pp.778-881. (in Chinese)

[11] Ji Fu, "New type welding structure hanger device made of Q235A steel for pit furnace," HEAT TREATMENT OF METALS, Vol.34, No.3 (2009). (in Chinese)

[12] Ruming Teng, Miaoming, and Naiwen Li, "Design of the Total Lifting Tongs of Large Steel Pipe Arch Bridge," Elevating Machinery, No.3 (2007), pp.18-20. (in Chinese)

[13] Min Liu, Huating Yuan, and Bo Ma, "Optimization Design Method for A Hoisting Tooling," MISSLES AND SPACE VEHICLES, No. 3 (2010), pp.16-19. (in Chinese)

[14] Degen Cha, Shouchu Guo, and Shun Wang, "FEM Analysis on Horizontal Steel Roll Hanger'S Tong," Elevating Machinery, No.8 (2005), pp.48-50. (in Chinese)

[15] Heng Zhang, Ziqiang He, Haiyan Chen, etc., "Parameterization Design and FEM Analysis on Special Hanger of Large Devices," Elevating Machinery, No.6 (2009), pp.60-64. (in Chinese)