Heating Effect on the Qualities of Cr-Zr-N Thin Films by Increasing in Zr Sputtering Current

Abstract:

Chromium zirconium nitride (Cr-Zr-N) thin films have been prepared by reactive dc closed field unbalanced magnetron co-sputtering on Si (100) wafers without external heating and voltage biasing. Heating effect on chemical composition, microstructure, and adhesion of the films by increasing in Zr sputtering current was investigated by using field emission scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDX). The results suggested that heating in the film and substrate during the deposition with high Zr target current was caused by bombarding the growing film with high energetic particles. From EDX analysis, the decrease of N content could be an effect of nitrogen desorption caused by heating and bombarding of high energetic particles. FE-SEM cross-sectional morphology revealed that grain refinement by Zr addition and high atomic diffusivity on both surface and bulk by heating and bombarding of high energetic particles resulted in denser fibrous grain microstructure. However, the increase of Zr target current leaded to the film with high compressive stress and could affect the film adhesion.

• Periodical: Advanced Materials Research (Volumes 488-489)
• Pages: 67-71
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.488-489.67
• Online since: March 2012
• Authors: Chirawat Chantharangsi, Somyod Denchitcharoen, Surasing Chaiyakun, Pichet Limsuwan
• Keywords: Cr-Zr-N, Heating Effect, Sputtering

References

[1] X.T. Zeng, S. Zhang, C.Q. Sun and Y.C. Liu: Thin Solid Films Vol. 424 (2003), p.99.

[2] P. Hones, R. Sanjinés and F. Lévy: Thin Solid Films Vol. 332 (1998), p.240.

[3] M. Uchida, N. Nihira, A. Mitsuo, K. Toyoda, K. Kubota and T. Aizawa: Surf. Coat. Technol. Vol. 177-178 (2004), p.627.

[4] P. Hones, M. Diserens R. Sanjinés and F. Lévy: J. Vac. Sci. Technol. B Vol. 18 (2000), p.2851.

[5] E. Martinez, R. Sanjinés, A. Karimi, J. Esteve and F. Lévy: Surf. Coat. Technol. Vol. 180-181 (2004), p.570.

[6] G.S. Kim, B.S. Kim, S.Y. Lee and J.H. Hahn: Surf. Coat. Technol. Vol. 200 (2005), p.1669.

[7] S.M. Aouadi, T. Maeruf, R.D. Twesten, D.M. Mihut and S.L. Rohde: Surf. Coat. Technol. Vol. 200 (2006), p.3411.

DOI: 10.1016/j.surfcoat.2005.02.169

[8] Z.G. Zhang, O. Rapaud, N. Bonasso, D. Mercs, C. Dong and C. Coddet: Vacuum Vol. 82 (2008), p.1332.

DOI: 10.1016/j.vacuum.2008.04.054

[9] D.M. Mattox: Handbook of Physical Vapor Deposition (PVD) Processing, 2nd ed., (William Andrew Publising, United Kingdom 2010).

[10] J. Musil, in: Nanostructured Coatings, edited by A. Cavaleiro and J.T.M. De Hosson, chapter, 10, Springer (2006).

[11] C. Ratsch and J.A. Venables: J. Vac. Sci. Technol. A Vol. 21 (2003), p.96.

[12] I. Petrov, P.B. Barna, L. Hultman and J.E. Greene: J. Vac. Sci. Technol. A Vol. 21 (2003), p.117.

[13] P.M. Martin: Handbook of Deposition Technologies for Films and Coatings, 3rd ed., (William Andrew Publishing, United Kingdom 2009).

[14] M. Ohring: Materials Science of Thin Films, 2nd ed., (Academic Press, United States of America 2002).