Study on Resin Coated Sand Proppant Used for Oil Production

Tao Chen; Guo Zhen Wang; Jie Gao; Yan Dan Yang; Rui Ma; Xin Rong Lei; Chun Jie Yan

doi:10.4028/www.scientific.net/AMR.524-527.1910

Paper Titles

Studies on the Catalytic Cracking of Different Gas Oils for Maximizing Propylene
p.1889

Study on Desanding Technology Based on Gravity Sedimentation in Oil Gathering and Transportation Station
p.1895

Study on Energy Consumption Analysis and Application of Oil Gathering Station
p.1899

Study on Interface Behaviour of the Weak Alkali Ternary System
p.1905

Study on Resin Coated Sand Proppant Used for Oil Production
p.1910

Study on the Economic Stripping Ratio in Oil Shale Open-Pit Mine Used in Refinery
p.1915

The Lab Experiment Comparison of Converting into Different Chemical Flooding after Water Flooding in the Stage of Different Water Cut in Untabulated Reservoirs
p.1921

Vibration Characteristic of Latex Particle in Emulsion Oil under Pulse Electric Field
p.1925

Characteristic Metallurgical Relations and Qualities of the Iron Clamps of the Epikourios Apollo
p.1931

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 524-527Study on Resin Coated Sand Proppant Used for Oil...

Study on Resin Coated Sand Proppant Used for Oil Production

Abstract:

A method of preparing precured resin coated sand particles was developed. The effects of resins dosages, plasticizer and coupling agent on the sphericity, roundness, crush resistance and flow conductivity of pre-cured resin coated sand were also discussed. Compared with raw sand, the sphericity and roundness of this resin coated sand particles is higher. It also possessed excellent properties to company sample, such as better resistance to crushing, as well as higher short term flow conductivity. By use of the resin coated sand, the cost could be reduced, and the yield of raw oil will be increased. It is a promising method of modified sand in field of hydraulic fracturing treatment.