Comparison and Application of High Prestress and Intensive Support System in Close, Soft and Cracked Roadway Support

Abstract:

Based on the analysis of support effect under original support design at Hongmiao Colliery, the paper summarized the main factors causing the destruction of roadways under neighboring gob areas, and pointed that the low pre-tension of the former support system and the irrationality of auxiliary support components were the main reasons for the failure of roadway support. The high prestress and intensive bolt-cable support system was recommended to reinforce roadways of this type, and the industrial on-site trial had been carried out in the transportation roadway of the Panel One of 5-2^s Block, located at District 5. The test results showed that such measures as full encapsulation with high pre-tension for bolts and cables and auxiliary components with larger section and high strength could be used to effectively control roadway deformation. They provided an effective approach for the support of roadways under similar conditions.

• Periodical: Advanced Materials Research (Volumes 524-527)
• Pages: 29-35
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.524-527.29
• Online since: May 2012
• Authors: Bin Hu, Hong Pu Kang, Jian Lin
• Keywords: Coal Seams with Narrow Space, Full Encapsulation, High-Strength Support System, Soft Rock Roadway

References

[1] Hongpu Kang, Jinhua Wang, Jian Lin: Case studies of rock bolting in coal mine roadways. Chinese Journal of Rock Mechanics and Engineering, vol. 29 (2010), p.649. (In Chinese)

[2] Jian Lin, Mingjia. Fan, Linpo Si, Pengfei Jiang: Research on anchored bolt and anchored rope supporting soft and cracked coal roadway under near gob. Coal Mining Technolog, vol .15 (2010), p.45. (In Chinese)

[3] Ye Zhou, Bing. Liang, Gang Li: Supporting technology of soft rock roadway in Hongmiao colliery. Coal mining Technology, vol .13 (2008), p.47. (In Chinese)

[4] Yang Zhou: Research on hongmiao mine untied timbering of soft rock coal roadway under high stress. Liaoning: Liaoning Technical University, 2005. (In Chinese)

[5] Hongpu Kang, Jinhua Wang, etc.: Rock bolting theory and complete technology for coal roadways. Beijing: China Coal Industry Publishing House, 2007. (In Chinese)

[6] Hongpu Kang, Jinhua Wang, Jian Lin: High pretensioned stress and intensive bolting system and its application in deep roadways. Journal of China Coal Society, vol .32 (2007), p.1233. (In Chinese)

[7] Jian Lin: Application of high strength, high stiffness and powered anchor supporting system in deep, high stress and soft rock roadway. Coal mining Technology, vol. 11 (2006), p.59. (In Chinese)

[8] Bin Hu, Jian Lian, Pengfei Jiang: Influence of ring thickness of anchored agent on anchored quality of resin anchored bolt. Coal mining Technology, vol. 16 (2011), p.20. (In Chinese)

[9] Mingjian Fan, Hongpu Kang: Relationship research of bolt pre-stress and supporting effect of roadway. Coal mining Technology, vol.12 (2007), p.1. (In Chinese)

[10] Hongpu Kang, Tieming Jiang, Fuqiang Gao: Effect of pretensioned stress to rock bolting. Journal of China Coal Society, vol.32 (2007), p.673. (In Chinese)

[11] Jian Lin, Hongpu Kang: Cause analysis of pre-tightening loss of anhor cable and setting approach. Coal mining Technology, vol. 13 (2008), p.6. (In Chinese)

[12] Hongpu Kang, Yongzheng Wu, Jianbo Li: Analysis on mechanical performances and supporting function of combination components for rock bolting. Journal of China Coal Society, vol. 35 (2010), p.1057. (In Chinese)

[13] Jianbo Li: Study on mechanical property and support function of steel strip. Beijing: China Coal Research Institute, 2008. (In Chinese)

[14] Jianxing Wu: Study on the Rational Structure and Supporting Effect of Rock Bolt Plate. Beijing: China Coal Research Institute, 2009. (In Chinese)

[15] Zhiyong Sun, Jian Lian: Mechanical Characteristic of Steel Fabric Welded to Anchored Bolt. Coal mining Technology, vol. 16 (2011), p.14. (In Chinese)

[16] D. Bigby: Coal Mine Roadway Support System Handbook. Rock Mechanics Technology Ltd for the Health and Safety Executive, 2004.

[17] W.A. Cincilla : Determination of effective column lengths for resin grouted roof bolts. Peng SS: Proceedings of the Fifth International Conference on Ground Control in Mining, Morgantown, 1986, p.6.