Study on Tilt Model and Finite-Element Simulations on Roller Leveler

An Rui He; Hai Dong Chen; Wei Gan; Long Jun He

doi:10.4028/www.scientific.net/AMR.572.278

Paper Titles

The Influence of Process Parameters during Hot Stamping of AA6111 Aluminum Alloy Sheet
p.255

Constitutive Relationship of TRIP780 Steel in Quenching Process
p.261

Study on Superalloy Tube Extrusion Process Using Finite Volume Method
p.267

Experimental Research on Heating Performance of Monel K-500 Alloy
p.273

Study on Tilt Model and Finite-Element Simulations on Roller Leveler
p.278

The Modification of Leveling Model for Roller Leveler Based on Ansys/LS-DYNA
p.284

3D Cantilever Model Research on Roller Leveling Process of Plate with Lateral Buckling Defects
p.290

Controlling Research of the Pre-Bending Deformation before Straightening and Residual Stresses after Straightening for 100-Meter
p.296

The Influence of Process Scheme on the Straightening Effect of Section Steel
p.302

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 572Study on Tilt Model and Finite-Element Simulations...

Study on Tilt Model and Finite-Element Simulations on Roller Leveler

Abstract:

According to the adjustment process of wide plate roller leveler of the cross cut shearing line, tilt model during leveling was established with ANSYS/LS_DYNA, which is one of the dynamic FE analysis software. The leveling effect on plate shape quality with or no with tilt model was analyzed respectively. The simulation results indicated the tilt model can get the more equivalent stress distribution and reduce the residual stress, which improve the straightness quality of the plate. In addition, the leveling force of each work roll can be decreased with tilt model. This is very beneficial to increase the production output of the leveler.

You might also be interested in these eBooks

Advances in Rolling Equipment and Technologies II

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 572)

Pages:

278-283

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.572.278

Citation:

Cite this paper

Online since:

October 2012

Authors:

An Rui He, Hai Dong Chen, Wei Gan, Long Jun He

Keywords:

ANSYS/LS_DYNA, Leveler, Straightening Force, Tilt Model

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] F. Cui: Straightening Principles and Straightening Machinery, (Metallurgical Industry Press, Beijing, 2005). (In Chinese).

Google Scholar

[2] E. Doegel, R. Menzl and S. Huinink: Iron and Steel Engineer, Vol. 28 (2002) No. 6, pp.29-34.

Google Scholar

[3] C.L. Zhou: Simulation and Mathematical Model on Hot Plate Roller Leveling (Ph. D, Northeastern University, China, 2005). p.73. (In Chinese).

Google Scholar

[4] J.L. Xu: The Research on the Leveler Adjustment Programs About Jinan iron and stell Group (MS., Beijing University of Science and Technology, China, 1999). p.53. (In Chinese).

Google Scholar

[5] F. Cui and D.C. Shi: Metallurgical equipment, Vol. 113 (1999) No. 1, pp.22-25. (In Chinese).

Google Scholar