The Effect of Technological Parameter on the Co-liquefaction of Coal with Lignin

Qing Jie Tang; Zhi Hong Wang

doi:10.4028/www.scientific.net/AMR.577.167

Paper Titles

A Review on Reagents and Processes of Fine-Grained Cassiterite Flotation in Mining Engineering
p.151

Study on the Technique to Control Heat-Damage in Mine
p.155

The Study of Numerical Simulation about Roadway Bolting and Reinforcement to Jointed Rock Mass
p.159

Effect of Pore Pressure Variation on Borehole Stability of Drilling in Sandstone Reservoir
p.163

The Effect of Technological Parameter on the Co-liquefaction of Coal with Lignin
p.167

A Study for Piping Phenomenon of the Different Graded Sands on Slope in Mining Engineering of Civil Construction
p.171

Numerical Analysis of the Recovery Rate Influence with Stowing Roadway Mining in Daizhuang Shengjian Coal Mine
p.177

Magnetic Separation to Recover Iron Minerals from Flotation Tailings
p.183

Beneficiation of a Low Grade Titanomagnetite Ore in Mining Engineering
p.187

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 577The Effect of Technological Parameter on the...

The Effect of Technological Parameter on the Co-liquefaction of Coal with Lignin

Abstract:

The co-liquefaction of coal with lignin was studied by minisize high pressure reactor, tetralin and Fe2O3 were used as solvent and catalyst, and the study was focused on the reaction temperature, initial pressure of hydrogen and mixture ratio of lignin with coal. The results showed that the reaction temperature, the initial pressure and mixture ratio has the important influence on the conversion rate of coal, the oil production rate in the process of co-liquefaction with coal and the lignin. Effect of co-liquefaction is best in reaction temperature 440°C, initial pressure 9Mpa, mixture ratio of lignin and coal for 2∶8, the conversion rate of coal and the oil production rate respectively achieves 87.66% and 50.39%.