Structure and Properties of Ti/TiN/Sb-SnO2 Electrodes with Plasma Sprayed TiN Interlayer

Xiao Wen Wu; Jian Xin Zhang; Yang Wang; Amin Huang

doi:10.4028/www.scientific.net/AMR.602-604.1613

Paper Titles

Analysis on Functionally Graded Material Coating Interface Crack
p.1596

Investigation of Surface Roughness in Hardened GCr15 Steel Turning with Mixed Ceramic Insert
p.1600

Densification and Purification of Cold Sprayed Ti Coating Layer by Using Annealing in Different Heat Treatment Environments
p.1604

Repair Technology of Shafts in Boats and Ships
p.1609

Structure and Properties of Ti/TiN/Sb-SnO₂ Electrodes with Plasma Sprayed TiN Interlayer
p.1613

Paper and Board Pigment Coating Raw Materials – A Review of some Recent Innovative Novelties
p.1617

Determination of Coated Substrate Roughness by Quantification of Measured Depth Profiles
p.1624

Preparation of Glass-Ceramics of Li₂O-Al₂O₃-ZnO-SiO₂ System Coating Toughed by ZrO₂ Basic on Metal Substrate
p.1630

The Progress and Development Direction of Adding Ball Methods
p.1635

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 602-604Structure and Properties of Ti/TiN/Sb-SnO2...

Structure and Properties of Ti/TiN/Sb-SnO₂ Electrodes with Plasma Sprayed TiN Interlayer

Abstract:

In this paper, TiN coating as an interlayer was fabricated on Ti substrate by reactive plasma spray. Ti/TiN/Sb-SnO2 electrodes were prepared by SOL-GEL method and the influence of the TiN interlayer on the structure, oxygen evolution potential and service life of the electrodes was studied. It was shown that the surface of the Ti/TiN/Sb-SnO2 electrodes is more homogeneous and the oxygen evolution potential and accelerated life are both higher than those of the Ti/Sb-SnO2 electrodes.