Effects of Compound Additives on Properties of Cermet Inert Anodes

Fu Xiang Wei; Gen Xi Yu; Zhi Ling Wang

doi:10.4028/www.scientific.net/AMR.634-638.1910

Paper Titles

Application of POD Projection to Orientation Optimization of Laminated Composite Design
p.1890

Curing Reaction Kinetics of Epoxy/MWCNT-P Composites
p.1896

Dielectric and Infrared Properties of Plasma Sprayed Nano β-SiC/ Al₂O₃ Agglomerate Composite Absorbing Coatings
p.1901

Effect of Compositions of Penetrating Agents on the Microstructure of Tungsten-Chromium Surface Composite
p.1906

Effects of Compound Additives on Properties of Cermet Inert Anodes
p.1910

Fabrication of Continuous Nickel-Coated Carbon Fiber Reinforced Aluminum Matrix Composites Using Low Gas Pressure Infiltration Method
p.1914

Effects of Different Size and Shaped Magnesium Particles on the Properties for Fuel Rich Solid Propellant
p.1918

Facile Fabrication of Superhydrophobic Surface via SiO₂/Fluoro-Containing Polymer Composite Particles
p.1922

Flame Retardant Epoxy Resin Containing Magnesium Phosphinate
p.1927

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 634-638Effects of Compound Additives on Properties of...

Effects of Compound Additives on Properties of Cermet Inert Anodes

Abstract:

In this paper, a combination of a two-step sintering and a particle size gradation technique was used to prepare cermet samples. The effects of compound additives with various combination of SnO2 and BaO on the performance of cermet were investigated. The results showed that, the performance of cermet could be improved by doping compound additives. The density of cermet sample reached to 5.61g•cm-3, and the porosity fell to 2.01%. Furthermore, we did observe a significant enhancement in its conductivity. The sample with 1% BaO additive has the highest conductivity at 8.02S/cm at 960°C, is increased by about 36% compared with the BaO undoped cermets.