Advanced Materials Research Vols. 634-638

Abstract: This paper applies the emerging paradigm of Collaborative Networks (CNs) to the global mining supply chains (introducing the new concept of ‘global mining supply networks’) and demonstrates that the efficiency of the global mining projects initiated and managed by the global mining supply networks can be limited by the complexity of the supply network itself. This paper then presents methods and theoretical examples to calculate and reduce the structural complexity of the global mining supply networks and the complexity of creation of the global mining projects through applying the virtual brokerages to the global mining supply networks.

Abstract: the major elements of the copper sulfide tin ore are Copper, tin and zinc, The grade of copper is 1.22%,as chalcopyrite and copper sulfide tin ore exists in the ore, the grade of tin is 1.19%,With gray tin and tin exists in the stone, the grade of zinc is 1.27%, Zinc is mainly in sphalerite,it is not easy separation Because ore structure is complex, due to the flotability of copper zinc is similar, The first with prior flotation method choose copper zinc mixed concentrate, Use re-election for tin enrichment, The last is copper zinc separation flotation.

Abstract: The effect of rod arrangement in a rod matrix on high gradient magnetic separation (HGMS) performance has been comparatively investigated through a cyclic pilot-scale centrifugal HGMS separator, with contiguously and orthogonally arranged rod matrixes respectively. The results of investigation indicate that the arrangement of rod elements in the matrix has a distinct effect on the HGMS performance, for relatively low magnetic inductions; beyond the threshold magnetic induction, the magnetic induction dominates that of the arrangement and the importance of the arrangement is significantly weakened even vanished. It was thus concluded that the combinatorial optimization for magnetic elements in the matrix improves the collision efficiency of particles with matrix, and gives a superior performance in a HGMS separator, at a lower energizing consumption.

Abstract: The grate-rotary kiln pellet process of chromite concentrate, which is not only complying with the chrome ore agglomeration process, but also meeting the development of grate-rotary kiln pelletizing technology, and is an effective mearsure of increasing use of high-carbon ferrochrome as well. In this work, aiming at study on grate-rotary kiln pellets of 0.3Mtpa chromite concentrate’s mass balance calculations, the results show when the material is in the specific surface area of 1700cm2/g, the compressive strength of 11 N per pellet, drop number of 5 times from 0.5m height and cracking temperature of 435°C are achieved, especially cracking temperature is higher than the highest temperature of grate DDD 400°C. Measuring and calculation of dehydration loss, ash content and bulk material loss, as well as reduction loss and oxidation loss of coke powder of the green pellet are achieved. The reduction degrees of FeO and Cr2O3 are 68.06% and 52.24% respectively, and comprehensive reduction degree is 58.52%. In this research, the mass balance table of payments of the grate-rotary kiln system is listed, and a detailed mass balance diagram is also obtained.

Abstract: The experimental study on removal of arsenic from sulfuric-acid residue of high-arsenic was conducted in this paper. Reduction roasting–magnetic separation and sulfuric acid leaching were discussed, and the results showed that the harmful impurity arsenic can't be effectively removed by the reduction roasting-magnetic separation process from sulfuric-acid residue. The content of arsenic would be enriched with the growth of magnetic iron grade, while the effect of the arsenic removal was obvious for sulfuric acid leaching. The leach residue, in which the content of arsenic was only 0.24% with 92.29% of arsenic leaching rate was obtained from the raw ore with 2.78% of arsenic by the sulfuric acid leaching process. And the iron grade of sulfuric-acid residue reached 61.88% while content of non-ferrous metal was very Low, which can be used as a raw material of iron-smelting. This study provided a certain amount of technical support for the similar high arsenic sulfuric-acid residue recycling.

Abstract: The properties of a Cu-Pb oxide ore are investigated by XRD and SEM. Results show that the ore is characterized by chalcocite, galena, azurite and cerusite. Copper and lead phases analysis show that the oxidation rates of copper and lead are up to 70% and 72%, respectively. In order to get a good flotation performance for the difficult-to-treat ore, an efficient flotation technology of bulk flotation of Cu-Pb sulfides，separation of Cu-Pb sulfides, copper and lead oxides flotation has been developed. By applying the combined depressants (sodium thiosulfate + peroxide), activator Disulhydroxybenzen Thiodiazole (developed by Kunming Metallurgy Research Institute) in copper oxide flotation and sodium sulfide in flotation of lead oxide, chalcocite and galena can be separated and the Cu-Pb oxides can be activated. Results in closed circuit test show that when the feed assays 0.59% Cu, 2.40% Pb and 39.87 g/t Ag, marketable copper sulfide and oxide concentrates, lead sulfide and oxide concentrates can be obtained. At the same time, silver got enriched in the concentrates too. This study is expected to give a technical support in utilizing this complex Cu-Pb oxide ores.

Abstract: Laojunshan granite is located in east-south Yunnan. Study on the geology, petrochemistry, microelement and rare earth elements of the Laojunshan granite indicates that the Laojunshan granite is a complex granite, which is divided into three epoch and various metasomatism within the granite is visible. The content of titanium, iron, magnesium is low and the content of silicon, aluminium, potassium is high in the granite, reflecting the granite is a granite of saturated-aluminium series and speculating mother rock of the granite is mud, psammitic rock. Formation of the granite is related with geological development of Laojunshan area, sedimenting in form of subside in the pre-Caledonian epoch, upheavaling in the late-Caledonian epoch and arising orogeny from the Indo-Chinese epoch to the Yannshan epoch, and undergoing sedimention, regional metamorphism, migmatization, granitization and remelting magma emplacement. Because Laojunshan granite possesses features of autochthonous and parautochthonous transformation type granite, origin of Laojunshan rock body belongs to continental crust alterational and metasomatic remelting granite.

Abstract: According to the analysis of geological characteristics and Elemental correlation charac –teristics, Threshold and R-factor analysis leading to the results geochemistry characteristics of Kanmashan Pb-Zn polymetallic deposit which is located in Lancang county of Yunnan province, the deposit is discovered in the southern arc of Chong mountain-lincang-menghai mountain, alonging the contact strip of Lincang granitoid batholith and proterozoic group in LanCang, metallogenic conditions near fracture is relatively ideal, which can be used as a further work area.

Abstract: Zinc oxide ore from Lanping contained large amount of fine slime which badly deteriorated flotation performance, and it complexly intergrowed with plenty of alkaline gangues with calcium and magnesium. In order to investigate the impact of pre-desliming on flotation, experiments of direct flotation and pre-desliming flotation were carried out in the work. Finally, a zinc recovery of 88.73% with a Zn grade of 13.93% was obtained in direct flotation test, and a higher zinc recovery of 95.25% with a Zn grade of 13.56% was achieved by pre-desliming flotation. Pre-desliming flotation test was superior to direct flotation test, because of an increase of nearly 7% in zinc recovery under the condition of similar Zn grade. At the same time, dosage of sulfurization agent used in pre-desliming flotation was lower by 46.67% than that in direct flotation, which obviously improved the availability of sulfurization agent. So both product index and economic benefit were enhanced after pre-desliming.

Abstract: Since the 1950s, the Changdong-Manxu Pb-Zn deposit has ever been explored for ore bodies by a number of Geology Parties，On the basis of studying the regional metallogenic geological background, Geologic characteristics of the deposits, ore-controlling geological factors, they thought the deposit belongs to sedimentary transformation type stratabound lead-zinc ore deposit ,which controlled by fault structures. According to the features of ore-controlling fault features and metallogenic conditions，it is possible to find large to super-large ores inside and outside the tectonic zones of the deposit.