Simulation Research on the Metal Cutting Process

Cheng Lei; Shou Ne Xiao; Shi Hui Luo

doi:10.4028/www.scientific.net/AMR.641-642.277

Paper Titles

Experimental Study on the Recovery of the Zinc from Iron Tailings in Hebei
p.256

Extraction of Aluminum by AlCl Disproportionation Process in Vacuum
p.262

Facile Synthesis of TiO₂ Hollow Spheres with Enhanced Photocatalytic Activity
p.266

Recovery of Molybdenum (VI) from Aqueous Solution with Packed Foam Column by Steady-State
p.270

Simulation Research on the Metal Cutting Process
p.277

Study on Catalytic Wet Oxidation of H-Acid Containing Water over Fe/SiO₂ Catalyst
p.281

Study on Raw Materials Ratio Factor in Synthesis of Ammonium Polyphosphate with Crystalline Form V
p.285

The Reasearch on the Controll System of the Electric Loop of the Hot Strip Mill
p.289

Preparation of Granular Sorbent (GS) from Red Mud by Thermal Activation and its Application for Cu²⁺ Removal
p.294

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 641-642Simulation Research on the Metal Cutting Process

Simulation Research on the Metal Cutting Process

Abstract:

The three-dimensional explicit dynamic analysis of metal cutting process is done using the non- linear finite element software LS-DYNA. In the finite element model, 8- node 3D solid element based on one- point integration Lagrangian formulation is adopted, metal material is modeled with Johnson-Cook constitutive model, chip separation is simulated using the material failure criterion of Johnson and Cook proposed and combing the failure element deletion method, friction model of chip-tool contact interface is developed to simultaneously account for sticking and sliding situation. Through explicit analysis, rake angle, cutting depth, and cutting width on the shape of the chip influence are obtained.