Morphology and Mechanical Properties of the Polyurethane/PANI-DBSA Blend Nanofibers by the Electrospinning Technique

Xiu Lian Wang; Liu Xue Zhang

doi:10.4028/www.scientific.net/AMR.651.87

Paper Titles

Carboxymethylation Fiber of Dissolved Air Flotation Rejects and its Influences on Paper Properties
p.67

Synergistic Effects of MoDTC and Overbased Calcium Sulfonate Additive
p.73

Preparation and Characterisation of Electrochromic Fabrics Based on Polyaniline
p.77

Study of Friction and Wear Behavior of Overbased Calcium Sulfonate Complex Grease Containing Anti-Oxidant Additives
p.83

Morphology and Mechanical Properties of the Polyurethane/PANI-DBSA Blend Nanofibers by the Electrospinning Technique
p.87

Surface Morphology and Structural Investigation of TiN Nanocrystal Thin Films Grown with Different N₂ Concentration
p.91

Synthesis and Photoelectric Properties of a Novel Polymerizable Perylene Diimide Electron Acceptor Material
p.97

Hydrophilic and Photocatalytic Performances of Y-Doped Titanium Dioxide Thin Films
p.103

Potential for Persulfate Degradation of Semi Volatile Organic Compounds Contamination
p.109

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 651Morphology and Mechanical Properties of the...

Morphology and Mechanical Properties of the Polyurethane/PANI-DBSA Blend Nanofibers by the Electrospinning Technique

Abstract:

In this study, composite nanofibers of polyaniline doped with dodecylbenzene sulfonic acid (PANI-DBSA) and polyurethane (PU) were prepared via an electrospinning process. The morphology, diameter, and structure of the electrospun nanofibers were investigated. SEM images showed that the morphology and diameter of the nanofibers were mainly affected by the weight ratio of the blend. The average diameter of the nanofibers was 370–1620 nm. The diameter gradually decreased with increasing PANI-DBSA content in the blend, and more beads were obtained in the composite.