Structural Optimization Design for Lower Beam of Hydraulic Press with the Casting Process Requirement

Abstract:

Through combining with VC++ and APDL language of ANSYS, the finite element optimization design for lower beam of the YJ32 hydraulic press was completed used complex method. The global optimum solution was obtained in the case of meeting the casting process requirement. The casting process requirement is that the thickness of a casting is almost the same and the inner wall thickness should be a little smaller than the outside wall thickness. The optimal result reduces the structure weight and the cost of the lower beam. Meanwhile, this provides a new method for the finite element optimization design about castings.

• Periodical: Advanced Materials Research (Volumes 655-657)
• Pages: 386-389
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.655-657.386
• Online since: January 2013
• Authors: Wan Jun Zhao, Zheng Hua Deng, Hua Ju Teng
• Keywords: Casting Process Requirement, Complex Method, Finite Element Analysis (FEA), Lower Beam of Hydraulic Press, Optimization Design, VC++

References

[1] Yancong Li, Lianhong Zhang, Zhanwen Liu, Wei Wei and Sen Li: Journal of Mechanical Engineering Vol. 46(2010), p.140, In Chinese

[2] Dongchen Qin, Jianzhong Qi, Yueli Liu and Yaping Lu: Journal of Mechanical Strength Vol. 23(2001), p.246, In Chinese

[3] Dake Zhang, Shengquan Sun: Journal of Chongqing University Vol. 32(2009), p.1117, In Chinese

[4] Xinlu Yu: Modern Design Theory of Hydraulic Press (China Machine Press, China 1987)

[5] GB/T 3818-1999, Technology Conditions of Hydraulic Press (Ministry of Machinery Industry, China 2000)