Pavement Performance of Hot In-Place Recycling for Waste Asphalt Mixtures

Abstract:

With the early asphalt pavements have been into the stage of medium maintenance or overhaul, recycling is a very important way for waste asphalt mixtures. A sample was taken in the expressway from Huhhot to Baotou, and the waste mixtures were extracted from field and sieved; so that the new aggregates can be determined and mix design was carried. With the aid of the penetration, the softening point and the viscosity in 135°C test, the quantity of the regenerant and the asphalt content were ascertained. Through the high temperature stable performance, the anti-low temperature performance, the water stability and the Hamburg wheel-tracking test, the appropriate gradation and the optimum asphalt content were determined. The test results showed that the pavement performance of the waste asphalt mixture was enhanced obviously with hot in-place recycling, and it has achieved technical parameters for old asphalt mixture.

• Periodical: Advanced Materials Research (Volume 668)
• Pages: 292-296
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.668.292
• Online since: March 2013
• Authors: Ya Li Ye, Chuan Yi Zhuang, Jia Bo Hu
• Keywords: Aggregate Gradation Design, Hot In-Place Recycling, Pavement Performance, Regenerant, Waste Asphalt Mixture

References

[1] Zhao Hui-min. Evaluation of the Pavement Performance of the Hot Recycled Asphalt. Dalian University of Technology(2008).

[2] Basic Asphalt Recycling Manual. Asphalt Recycling and Reclaiming Association(2001).

[3] Recycling Hot Mix Asphalt Pavement. National Asphalt Pavement Association, Information Series 123(1996).

[4] P.R. China. Ministry of Communications. JTG F40-2004 Technical Specifications for Highway Asphalt Pavement Recycling., Beijing, China Communications Press. (2004).

[5] P.R. China. Ministry of Communications. JTJ 052-2000 Standard Test Methods of Bitumen and Bituminous Mixture., Beijing, China Communications Press (2000).

[6] JTG F40-2004, Technical Specification for Construction of Highway Asphalt Pavements(2004).

[7] Han Qing-chun. Study on the Application of Hot In-place Recycling of the Asphalt Pavement. Master degree thesis of Jilin University(2007).

[8] Liu Lin-lin. Study on the In-place Hot Recycling Technonly of Asphalt Pavement. Dalian University of Technology(2005).