Research on the Characteristic of Dyeing-Printing Wastewater Treatment with Micro-Aerobic Granular Sludge

Ling Feng Zhu; Dou Dou Huang; Chao Ye; Xiao Min Wang; Jie Yan Wu; Yan E Tian

doi:10.4028/www.scientific.net/AMR.726-731.2757

Paper Titles

Removal of Pb (II) from Aqueous Solution by Blast-Furnace Slags
p.2736

Removal of Sodium Ions from the Mother Liquor of Sodium Fluorosilicate by Ion Exchange Method
p.2742

Research on Hazardous Waste Disposal Bus System Built in China's Dalian Xizhong Island Petrochemical Park
p.2747

Research on Micro-Aerobic Granular Sludge in the Process of Cultivation
p.2753

Research on the Characteristic of Dyeing-Printing Wastewater Treatment with Micro-Aerobic Granular Sludge
p.2757

Research on the Characteristics of the Solid Waste and Sludge Composting of the Expressway Service Area
p.2761

Research on the Household Waste Management Based on Green Logistics in Beijing City
p.2767

Research on the Preparation of Baking-Free Brick Using the Tailings of Flue Gas Desulfurization of Pyrolusite Slurry
p.2771

Risk Assessment of PAHs in Solid Residues from Supercritical Water Gasification of Sewage Sludge
p.2778

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 726-731Research on the Characteristic of Dyeing-Printing...

Research on the Characteristic of Dyeing-Printing Wastewater Treatment with Micro-Aerobic Granular Sludge

Abstract:

In order to treat dyeing-printing wastewater, the experiment took reflux tank, self-regulating control valve making of medical infusion, air flow meter, dissolved oxygen instrument, aerator pumps and aeration equipment under the micro-aerobic condition by IC reactor. The result indicates that the concentration of dissolved oxygen at 0.3 ~ 0.5 mg/L, increasing the load of mixed water and in-flow water by 25% and 7% separately in turn, the experiment is feasible. When COD load reached 2188.2 mg/ L in the mixed wastewater, the components in printing and dyeing wastewater are poisonous and repressive to the grown of granular sludge, which also illuminates that the function of micro-aerobic granular sludge treating printing and dyeing wastewater is limitary. When the influent load reached 4655.1mg / L or so, dissolved oxygen was 0.3 ~ 0.5mg / L, HRT was 6h, the reactor worked best, this moment, the removal rate of COD could reach 85.8%.