Design of Laboratory Test Device for Evaluating the Lifetime of Hydraulic Components of Tractor Three-Point Hitch

Abstract:

The designed laboratory device will solve the issue of test methods of tractor hydraulics, monitoring the lifetime of hydraulic components, and testing of various oil types. The results of experimental measurements of forces and pressures in the three-point hydraulic hitch of tractor with plough allow implementing the design and simulation of operational loads of the dynamic system of tractor three-point hitch (TPH) under laboratory conditions. Theoretical and experimental works were focused on tractors. The design of test device is based on load characteristics obtained from the operation of tractor with plough. Research was focused on the use of results obtained from operational measurements of the tractor with plough and their simulation by a hydrostatic simulator under laboratory conditions. The laboratory device will enable the TPH life tests while loading with forces in the horizontal and vertical direction so that it corresponds to a practical loading process

• Periodical: Advanced Materials Research (Volume 801)
• Pages: 137-142
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.801.137
• Online since: September 2013
• Authors: Ľubomír Hujo, Zdenko Tkáč, Juraj Tulík, Vladislav Hajdák
• Keywords: Agricultural Tractor, Hydraulic Circuit, Test Device, Three-Point Hitch

References

[1] P. Cvíčela, R. Majdan, R. Abrahám, Prevádzkové zaťaženie hydrogenerátora traktora Zetor Forterra, In: 34th International Conference of Departments of Transport, Handling, Construction and Agricultural Machinery 2008, VŠB – Technical University of Ostrava, Ostrava, 2008, pp.111-117.

[2] P. Cvíčela, R. Majdan, R. Abrahám, J. Jablonický, Monitoring the operating loading of a hydrostatic pump UD 25, In: 10th International Conference of Young Scientists 2008, Czech University of Life Sciences Prague, Prague, 2008, pp.42-47.

[3] Š. Drabant, Ľ. Hujo, Skúšky regulačného hydraulického systému traktora, In: Agrotech, Nitra, 2001, pp.95-101.

[4] Š. Drabant, A. Žikla, Ľ. Hujo, D. Varga, P. Kleinedler, Analýza zaťažovacích charakteristík trojbodového závesu traktora, Hydraulické mechanizmy mobilnej techniky. (2005) 113-124.

[5] Ľ. Hujo, J. Kosiba, J. Jablonický, J. Tulík, Load characteristics of three-point tractor linkage, Naučni trudove : zemedelska technika i technologii, agrarni nauki i veterinarna medicina, remont i nadeždnosť. 51 (2012) 172-176.

[6] J. Jobbágy, I. Petranský, J. Simoník, Tlakové režimy v hydraulike traktorov ZTS v súprave s poľnohospodárskym náradím, In: International Student Scientific Conference, SUA in Nitra, Nitra, 2003, pp.94-101.

[7] J. Kosiba, R. Majdan, J. Jablonický, R. Abrahám, D. Müllerová, Trends of development and using of tractors in the Slovak Republic after European Union affiliation, Traktori i pogonske mašine. 15(1) (2008) 14-18.

[8] J. Kosiba, F. Varga, M. Mojžiš, Ľ. Bureš, Záťažové charakteristiky traktora Fendt 926 Vario pre simuláciu na experimentálnom zariadení, Acta Facultatis Technicae. 17 (2011) 63-72.

[9] M. Kučera, M. Rousek, Evaluation of thermooxidation stability of biodegradable recycled rapeseed-based oil NAPRO-HO 2003, Research in Agricultural Engineering. 54 (2008) 163-169.

DOI: 10.17221/11/2008-rae

[10] V. Kročko, Z. Tkáč, R. Majdan, The evaluation of the technical durability of the hydrostatic pump UD 25 per cleanliness measurement of hydraulic fluid, Naučni trudove : zemedelska technika i technologii, agrarnye nauki i beterinarnaja medicina, remont i nadežnosť. (2008) 65-70.

[11] R. Majdan, B. Stančík, F. Tóth, I. Vitázek, R. Abrahám, I. Štulajter, Hodnotenie vlastností ekologických kvapalín na základe opotrebenia súčiastok traktorových hydrogenerátorov, Technika v technológiách agrosektora 2012. (2012) 128-133.

[12] J. Semetko, I. Janoško, Zisťovanie parametrov traktorov, 1st ed., SUA in Nitra, Nitra, 2005, 139 pp.

[13] J. Turza, B. Kopiláková, Kombinovaný stend pre meranie hydraulických prvkov, In: 11th International Scientific and Technical Conference, Zuberec, Žilina, Hydropneutech, 2011, pp.119-126.