The Effect of Zeolite on the Crystallization Behaviour and Tribological Properties of UHMWPE Composite

Abstract:

In this work, the effects of adding different filler loadings (520 wt%) of zeolite to the ultra-high molecular weight polyethylene (UHMWPE) matrix on the crystallinity behaviour and tribological properties were studied. The zeolite/UHMWPE composites were fabricated using hot compression moulding. The crystallization behaviour was investigated using differential scanning calorimetry (DSC). The tribological properties were monitored using a Ducom TR-20 pin-on-disc tester under different sliding speeds of 0.209 ms^-1 and 0.419 ms^-1 and with various applied loads of 5, 10, 15, 20, 25, 30 and 35 N. The worn surfaces of the zeolite/UHMWPE composites were observed under the scanning electron microscope (SEM). The results showed that the addition of zeolite into UHMWPE matrix can effectively enhance the percentage crystallinity of the UHMWPE. 15 wt% zeolite-reinforced UHMWPE composites show the increase of 47% in percentage crystallinity as compared to pure UHMWPE. The wear mass loss of the composites was found to be reduced by the incorporation of zeolite in UHMWPE. In addition, the average coefficient of friction (COF) was also found to decrease with the addition of zeolite. The lowest average COF was obtained by 20 wt% zeolite reinforcements into UHMWPE. Shallower grooves and smoother worn surfaces were observed for zeolite/UHMWPE as compared to pure UHMWPE.

• Periodical: Advanced Materials Research (Volume 812)
• Pages: 100-106
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.812.100
• Online since: September 2013
• Authors: Chang Boon Peng, Md Akil Hazizan, Ramdziah Md. Nasir
• Keywords: Crystallinity, Polymer Composite, Tribology, UHMWPE, Zeolite

References

[1] M.K. Steven, The UHMWPE Handbook Ultra-High Molecular Weight Polyethylene in Total Joint Replacement, Elsevier Academic Press, London, 2004.

[2] H.L. Stein, Engineered Materials Handbook, Ultra High Molecular Weight Polyethylene (UHMWPE). Vol. 2, 1999. pp.167-171.

[3] G. Guofang, Y. Huayong, F. Xin, Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding, Wear 256 (2004) 88-94.

DOI: 10.1016/s0043-1648(03)00394-6

[4] X. Dangsheng, Friction and wear properties of UHMWPE composites reinforced with carbon fiber, Materials Letters 59 (2005) 175-179.

DOI: 10.1016/j.matlet.2004.09.011

[5] Y.S. Zoo, J.W. An, D.P. Lim, D.S. Lim, Effect of Carbon Nanotube Addition on Tribological Behavior of UHMWPE, Tribology Letters 16 (2004) 305-309.

DOI: 10.1023/b:tril.0000015206.21688.87

[6] K. Plumlee, C.J. Schwartz, Improved wear resistance of orthopaedic UHMWPE by reinforcement with zirconium particles, Wear 267 (2009) 710-717.

DOI: 10.1016/j.wear.2008.11.028

[7] L. Fang, Y. Leng, P. Gao, Processing and mechanical properties of HA/UHMWPE nanocomposites, Biomaterials 27 (2006) 3701-3707.

DOI: 10.1016/j.biomaterials.2006.02.023

[8] D.S. Xiong, Wear properties of nano-Al2O3/UHMWPE composites irradiated by gamma ray against a CoCrMo alloy, Biomedical Materials 1 (2006) 175-179.

DOI: 10.1088/1748-6041/1/3/013

[9] B.P. Chang, H. M. Akil, R. B. M. Nasir, Comparative study of micro- and nano-ZnO reinforced UHMWPE composites under dry sliding wear, Wear 297 (2013) 1120-1127.

DOI: 10.1016/j.wear.2012.11.083

[10] J. Wen, J.E. Mark, Mechanical properties and structural characterization of poly(dimethylsiloxane) elastomers reinforced with zeolite fillers, Journal of Materials Science 29 (1994) 499-503.

DOI: 10.1007/bf01162513

[11] F. Özmihçi, D. Balköse, S. Ülkü, Natural zeolite polypropylene composite film preparation and characterization, Journal of Applied Polymer Science 82 (2001) 2913-2921.

DOI: 10.1002/app.2147

[12] J.L. Acosta, E. Morales, M.C. Ojeda, A. Linares, The effect of interfacial adhesion and morphology on the mechanical properties of polypropylene composites containing different acid surface treated sepiolites, Journal of Materials Science 21 (1986) 725-728.

DOI: 10.1007/bf01145547

[13] H. Pehlivan, D. Balköse, S. Ülkü, F. Tihminliogˇlu, Characterization of pure and silver exchanged natural zeolite filled polypropylene composite films, Composites Science and Technology 65 (2005) 2049-2058.

DOI: 10.1016/j.compscitech.2005.04.011

[14] E.A. Aksoy, B. Akata, N. Bac, N. Hasirci, Preparation and characterization of zeolite beta–polyurethane composite membranes, Journal of Applied Polymer Science 104 (2007) 3378-3387.

DOI: 10.1002/app.25976

[15] J.Y Lee, M.J. Shim, S.W. Kim, Effect of natural zeolite on the mechanical properties of epoxy matrix, Polymer Engineering & Science 39 (1999) 1993-1997.

DOI: 10.1002/pen.11592

[16] Z. Lv, C. Hu, J. Xue, T. Dou, Effect of zeolite 5A on the crystalline behavior of polypropylene (PP) in PP/β-nucleating agent system, Polymer Composites 29 (2008) 1291-1296.

DOI: 10.1002/pc.20411

[17] Z. Lv, K. Wang, Z. Qiao, W. Wang, The influence of modified zeolites as nucleating agents on crystallization behavior and mechanical properties of polypropylene, Materials & Design 31 (2010) 3804-3809.

DOI: 10.1016/j.matdes.2010.03.028

[18] R.S. Bedi, D.E. Beving, L.P. Zanello, Y. Yan, Biocompatibility of corrosion-resistant zeolite coatings for titanium alloy biomedical implants, Acta Biomaterialia 5 (2009) 3265-3271.

DOI: 10.1016/j.actbio.2009.04.019