Research on Sintering Polytechnic of PTFE/Al Reactive Materials

Jing Bo Wu; Mao Quan Li; Shu Hai Zhang; Yun Long Mei; Ze Tao Gao

doi:10.4028/www.scientific.net/AMR.820.25

Paper Titles

Design and Characterization of PbS/CdS Based Photovoltaic Cell
p.7

Shape Controllable Preparation of PbS Crystal by a Simple Solvothermal Method
p.11

Influence of Heat Treatment on the Microstructure and Properties of 7Cr17Mo Martensitic Stainless Steel
p.15

Microstructural Evolution during Partial Remelting of 6061 Aluminum Bulk Alloy Prepared by Cold-Pressing of Alloy Powder
p.20

Research on Sintering Polytechnic of PTFE/Al Reactive Materials
p.25

The Influences of Alternating Magnetic Field to the Microstructure and Mechanical Property of Diamond Agglomerations
p.30

Research of Aluminum Silicon Composite Layer on Heat Resistant Steel Grate by Cast-Infiltration Method
p.34

The Research of Anti-Counterfeiting Labels Based on Reflected Light Interference Color of Glass Beads
p.38

Synthesis and Characterization of Surface-Grafted Magnesium Oxide Whiskers with poly(L-lactide)
p.41

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 820Research on Sintering Polytechnic of PTFE/Al...

Research on Sintering Polytechnic of PTFE/Al Reactive Materials

Abstract:

PTFE/Al reactive material was prepared via a hot pressed sintering process and comparative experiments were conveyed considering heating rate, sintering temperature and heat preservation time. The internal microstructure of the material was investigated using metallurgical microscope and stereomicroscope. From the investigation the influence of process parameters of hot pressed sintering on the properties of the material were deduced, and the analysis was verified by testing the impact initiation property with drop hammer method. The density of the material was measured according to the Archimedean principle. and the results showed that the best operating conditions of these three factors are 80°C/h, 365°C, and 0.5h, This new method has a higher effectively (short process time) and need lower operation conditions (low sintering temperature and pressure) comparing with the traditional cold sintering process.

You might also be interested in these eBooks

Metallic Materials and Manufacturing Technology

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 820)

Pages:

25-29

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.820.25

Citation:

Cite this paper

Online since:

September 2013

Authors:

Jing Bo Wu, Mao Quan Li, Shu Hai Zhang, Yun Long Mei, Ze Tao Gao

Keywords:

Hot Pressed Sintering, PTFE/Al, Sintering Process

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Willis MJ, Holt W H. Impact Initiation of Pressed Polytetrafluorethylene (PTFE) and Aluminum Powders [J]. Shock Compression of Condensed Matter, 2005, CP845.

Google Scholar

[2] Shi-qing YANG , Song-lin XU, Tong ZHANG . Preparation and performance of PTFE/Al reactive materials [J]. Journal of national university of defense technology, 2008, 30(6): 39~42(In Chinese).

Google Scholar

[3] Xihua ZHANG, Changxia LIU , Jianhua ZHANG . Preparation of titanium carbide/alumina composites by hot-press sintering process [J]. Journal of the Chinese ceramic society. 2005, 33(7): 806~810(In Chinese).

Google Scholar

[4] Wen-jun YE , Tao WANG , Yin-hu YU . Research progress of fluoro-polymer-matrix energetic reactive materials [J]. Aerospace materials &technology. 2012, 42(6): 19~23(In Chinese).

Google Scholar

[5] Peng-duo ZHAO , Fang-yun LU , Jun-ling LI, Rong CHEN , Song-lin XU , Shi-qing YANG . The dynamic compressive properties of PTFE/Al reactive materials [J]. Chinese journal of energetic materials. 2009, 17(4): 459~462(In Chinese).

Google Scholar

[6] Xia CAO, Bin XIANG, Chao-yang ZHANG. Review on Relationships between the molecular and crystal structure of explosive and their sensitivities [J]. Chinese journal of energetic materials. 2012, 20(5): 643~649(In Chinese).

Google Scholar