Influence of Heat Treatment Cooling Mediums on the Degradation Property of Biodegradable Zn-3Mg Alloy

Abstract:

Recently, Zn-based alloys were introduced as alternative biodegradable metals to the well-studied Mg and Fe based alloys for temporary implants. In this work, Zn-3Mg alloy was developed using a conventional casting method followed by heat treatment with different cooling media. As-cast samples were heat treated at 370 oC for 10 hours then cooled in open air, water bath and inside furnace environments. The microstructure of as-cast alloy was characterized under optical microscope and phase analysis was evaluated using X-ray diffraction (XRD) technique. Potentiodynamic polarization tests were carried out on the heat treated samples for evaluating the degradation rate. It was observed that as-cast Zn-3Mg alloy consists of star-like-shape of primary Zn-rich dendrites which are segregated in the eutectic mixture of Mg₂Zn₁₁ phase. The segregation of these dendrites has been significantly reduced under water bath cooled treatment as compared to open air and inside furnace cooling. It is also found that the microstructure of the water cooled samples is more homogenous with less porosity than the as-cast, air or furnace cooled samples. The water cooled sample exhibits better degradation resistance for at least 2 folds than other treatments.

• Periodical: Advanced Materials Research (Volume 845)
• Pages: 7-11
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.845.7
• Online since: December 2013
• Authors: M.S. Dambatta*, S. Izman, Hendra Hermawan, Denni Kurniawan
• Keywords: Degradation, Heat Treatment, Potentiodynamic Polarization, Zn-Based Alloy

References

[1] H. Hermawan, Biodegradable Metals: From Concept to Applications. Heidelberg, Germany: Springer, (2012).

[2] X. -N. GU, Y. -F. ZHENG, A review on magnesium alloys as biodegradable materials, Front. Mat. Sci. China. 4 (2010) 111–115.

[3] Witte F., Kaese V., Haferkamp H., S. E., Meyer-Lindenberg A., Wirth C. J., and W. H., In vivo corrosion of four magnesium alloys and the associated bone response, Biomaterials. 26 (2005) 3557-3563.

DOI: 10.1016/j.biomaterials.2004.09.049

[4] H. Hermawan, H. Alamdari, D. Mantovani, D. Dube, Iron-manganese: new class of metallic degradable biomaterials prepared by powder metallurgy, Powder Metall. 51 (2008) 38–45.

DOI: 10.1179/174329008x284868

[5] J. Kubasek, D. Vojtech, Zn-based alloys as an alternative biodegradable materials, Metal. 5 (2012).

[6] Z. G. Huan, M. A. Leeflang, J. Zhou, L. E. Fratila-Apachitei, J. Duszczyk, In vitro degradation behavior and cytocompatibility of Mg-Zn-Zr alloys, J Mater Sci Mater Med 21 (2010) 2623-35.

DOI: 10.1007/s10856-010-4111-8

[7] P. K. Bowen, J. Drelich, J. Goldman, Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents, Adv. Materials. 10 (2013) 20-26.

DOI: 10.1002/adma.201300226

[8] D. Vojtech, J. Kubasek, J. Serak, P. Novak, Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation, Acta Biomater. 7 (2011) 3515-22.

DOI: 10.1016/j.actbio.2011.05.008

[9] E. Zhang, L. Yang, J. Xu, H. Chen, Microstructure, mechanical properties and biocorrosion properties of Mg–Si(–Ca, Zn) alloy for biomedical application, Acta Biomater. 6 (2010).

DOI: 10.1016/j.actbio.2009.11.024

[10] M. B. Karamış, İ. Halıcı, The effects of homogenization and recrystallization heat treatments on low-grade cold deformation properties of AA 6063 aluminum alloy, Materials Letters. 61 (2007) 944-948.

DOI: 10.1016/j.matlet.2006.06.016

[11] X. Wang, L. Hong-mei, L. Xin-lin, L. Li, Y. -f. Zheng, effect of cooling rate and composition on microstrcutures and properties of Zn-Mg alloys, Trans. Nonferrous Met. Soc. China. 17 (2007) s122-s125.

[12] B. Bobic, J. Bajat, Z. Acimovic-Pavlovic, M. Rakin, I. Bobic, The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1. 5Cu0. 02Mg alloy, Corrosion Science. 53 (2011) 409-417.

DOI: 10.1016/j.corsci.2010.09.051

[13] X. Yan, S. Liu, W. Long, J. Huang, L. Zhang, Y. Chen, The effect of homogenization treament on icrostructure and properties of ZnAl15 solder, Materials and Design. 45 (2013).

DOI: 10.1016/j.matdes.2012.09.033

[14] B. K. Prasad, A. K. Patwardhan, A. H. Yegneswaran, J Mater Sci 31 (1996).

[15] T. Prosek, A. Nazarov, U. Bexell, D. Thierry, and J. Serak, Corrosion mechanism of model zinc–magnesium alloys in atmospheric conditions, Corrosion Science. 50 (2008) 2216-2231.

DOI: 10.1016/j.corsci.2008.06.008