Production of Partition Blocks from Synthetic Gypsum

Marcela Fridrichová

doi:10.4028/www.scientific.net/AMR.860-863.1338

Paper Titles

Case Study of Building Energy and Environment Management System on Campus: A Report from Southeast University
p.1316

Variable Density Cellular Concrete
p.1323

Study of Traditional Tibetan Architectural Material and Security
p.1327

The Fuzzy Cluster Analysis Research Methods for Surface Enhanced Materials Resistance to Wind Erosion
p.1331

Production of Partition Blocks from Synthetic Gypsum
p.1338

Use of Thermal Insulating Perlite Composite Materials Based on Geocement to Protect Technological Equipment
p.1342

Experimental Investigation on the Shrinkage and Creep Performance of Self-Compacting Lightweight Concrete
p.1346

Numerical Study on Effect of Injection Rates on Combustion and Emission Performance
p.1357

Advances in Working Medium for Organic Rankine Cycle
p.1362

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 860-863Production of Partition Blocks from Synthetic...

Production of Partition Blocks from Synthetic Gypsum

Abstract:

The task is solved in connection with Ministry of Industry and Trade project which is involved in development of a complex building programme based on high quality gypsum binder from secondary raw materials. Within one of sub-stages a solution of production of small plaster elements is subject of the project which should present a basic unit for construction of interior plaster partition walls. In the framework of the task a cast of plaster shaped block was carried out using a pilot form of own production. A plaster produced in optimised pilot way from the synthetic gypsum modified with plasticizer and retarding additive was used as a filler binder. After demoulding the produced block was exposed in laboratory environment and tested for setting of selected required properties according to standard EN 12859 (dimensions, density, flatness, tensile strength on bend, pH).