Kiln Process Impact of Alternative Solid Fuel Combustion in the Cement Kiln Main Burner – Mathematical Modelling and Full-Scale Experiment

Abstract:

Increased use of alternative fuels in cement kilns is a trend in the world. However, replacing fossil fuels like coal with different alternative fuels will give various impacts on the overall kiln process due to the fuel characteristics. Hence, it is important to know to what extent the fossil fuels can be replaced by different alternative fuels without severely changing process conditions, product quality or emissions. In the present study, a mass and energy balance for the combustion of different alternative fuels in a cement rotary kiln was developed. First, the impact of different fuel characteristics on kiln gas temperature, kiln gas flow rate and air requirement were observed by using coal (reference case), meat and bone meal (MBM), two different wood types, refuse derived fuel and a mixture of saw dust and solid hazardous waste as the primary fuel. It was found that the key process parameters depend largely on the chemical characteristics of the fuel. It appears that MBM shows quite different results from other alternative fuels investigated. Next, simulation of combustion of a mixture of coal and MBM in the main burner was carried out in three steps. The first step was combustion of replacing part of coal energy with MBM, and a reduction in kiln exhaust gas temperature compared to the coal reference case was found. In the second step, the fuel feed rate was increased in order to raise the kiln gas temperature to that of the reference case. In the third step, the fuel feed rate and the clinker production rate were changed in order to have not only the same kiln gas temperature but also to obtain the same volumetric flow rate of total exhaust gas from the precalciner as in the reference case. Around 7% of reduction in clinker production rate could be observed when replacing 48% of the coal energy input. Results from a full-scale test using the same mixture of coal and MBM verified the simulation results.

• Periodical: Advanced Materials Research (Volumes 875-877)
• Pages: 1291-1299
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.875-877.1291
• Online since: February 2014
• Authors: Wijesinghe Kaluarachchige Hiromi Ariyaratne, Edirisinghe Vidana Pathiranage Jagath Manjula, Morten Christian Melaaen, Lars André Tokheim
• Keywords: Air Requirement, Cement Kiln, CoAl, Main Burner, Meat Meal, Production Capacity, Waste Derived Fuel, Wood

References

[1] P. Lemieux, E. Stewart, M. Realff, J.A. Mulholland, Emissions study of co-firing waste carpet in a rotary kiln, Journal of Environmental Management. 70 (2004) 27–33.

DOI: 10.1016/j.jenvman.2003.10.002

[2] G. Genon, E. Brizio, Perspectives and limits for cement kilns as a destination for RDF, Waste Management. 28 (2008) 2375–2385.

DOI: 10.1016/j.wasman.2007.10.022

[3] K. H. Karstensen, Formation, release and control of dioxins in cement kilns, Chemosphere. 70 (2008) 543–560.

DOI: 10.1016/j.chemosphere.2007.06.081

[4] S. Zemba, M. Ames, L. Green, M.J. Botelho, D. Gossman, I. Linkov, J. Palma-Oliveira, Emissions of metals and polychlorinated dibenzo(p)dioxins and furans (PCDD/Fs) from Portland cement manufacturing plants: Inter-kiln variability and dependence on fuel-types, Science of the Total Environment. 409 (2011).

DOI: 10.1016/j.scitotenv.2011.06.047

[5] U. Kaantee, R. Zevenhoven, R. Backman, M. Hupa, Cement manufacturing using alternative fuels and the advantages of process modelling, Fuel Processing Technology. 85 (2004) 293– 301.

DOI: 10.1016/s0378-3820(03)00203-0

[6] U. Kääntee, R. Zevenhoven, R. Backman and M. Hupa: Modelling a cement manufacturing process to study possible impacts of alternative fuels (Extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and economic aspects, Sweden 2002).

DOI: 10.1016/s0378-3820(03)00203-0

[7] I. K. Kookos, Y. Pontikes, G.N. Angelopoulos, G. Lyberatos, Classical and alternative fuel mix optimization in cement production using mathematical programming, Fuel. 90 (2011) 1277-1284.

DOI: 10.1016/j.fuel.2010.12.016

[8] C.A. Tsiliyannis, Alternative fuels in cement manufacturing: Modeling for process optimization under direct and compound operation, Fuel. 99 (2012) 20-39.

DOI: 10.1016/j.fuel.2012.03.036

[9] D.C. Nastac, U. Kaantee, J. Liimatainen, M. Hupa, M. Muntean, Influence of P(V) on the characteristics of calcium silicates and the hydration of clinkers, Advances in Cement Research. 19 No. 3 (2007) 93-100.

DOI: 10.1680/adcr.2007.19.3.93

[10] E. Cascarosa, G. Gea, J. Arauzo, Thermochemical processing of meat and bone meal: A review, Renewable and Sustainable Energy Reviews. 16 (2012) 942-957.

DOI: 10.1016/j.rser.2011.09.015

[11] I. Vermeulen, J.V. Caneghem, C. Block, W. Dewulf and C. Vandecasteele: Environmental Impact of Incineration of Calorific Industrial Waste: Rotary Kiln vs. Cement Kiln, Waste Management. (2012) in Press.

DOI: 10.1016/j.wasman.2012.05.035

[12] W.K.H. Ariyaratne, M.C. Melaaen, K. Eine and L.A. Tokheim: Meat and Bone Meal as a Renewable Energy Source in Cement Kilns: Investigation of Optimum Feeding Rate, (International Conference on Renewable Energies and Power Quality, Spain 2010).

DOI: 10.24084/repqj09.609

[13] L.A. Tokheim, Kiln system modification for increased utilization of alternative fuels at Norcem Brevik, Cement International. No. 4 (2006).

[14] W.K.H. Ariyaratne, Ø. Asgautsen, M. C. Melaaen, K. Eine, L.A. Tokheim, Determination of fossil fraction of Refuse Derived Fuel by the Selective Dissolution Method in Calorific value basis: Development of simplified method, Fuel. 98 (2012) 41–47.

DOI: 10.1016/j.fuel.2012.03.035

[15] Specification Vt10: Execution and Evaluation of kiln performance tests, Report, German Association of Cement Works (VDZ) (1992).

[16] L.A. Tokheim: The impact of staged combustion on the operation of a precalciner cement kiln, Ph.D. thesis, Telemark University College / Norwegian University of Technology and Science, Norway (1999).