Effect of Extrusion on Mechanical Properties of Spray Forming 8009 Heat Resistant Aluminum Alloy

Rong Hua Zhang; Bao Hong Zhu; Xiao Ping Zheng

doi:10.4028/www.scientific.net/AMR.886.32

Paper Titles

The Effect of the Electro-Deposition Temperature to the Texture of Silicon Steel Sample
p.16

Studies on Synthesis Mechanism of Fe-Si Alloy
p.20

Effect of Temperature and Pressure on the Nitrogen Content of High Nitrogen Steel
p.24

Effect of Bottom Blowing Time and Bottom Blowing Rate on the Nitrogen Content of High Nitrogen Steel
p.28

Effect of Extrusion on Mechanical Properties of Spray Forming 8009 Heat Resistant Aluminum Alloy
p.32

Research on the Second Phase of Spray Forming Al-8.5Fe-1.3V-1.7Si Aluminum Alloy
p.36

Alloy Design of New Ni-Based Structural Materials for Electrolytic Reduction and its Corrosion Behavior in Lithium Molten Salt
p.41

Numerical Simulation and Optimization of "Non-Catalytic Reduction" Process for Circulating Fluidized Bed Boiler Based on Properties of Materials
p.45

A Study of the Fire Resistance against Structural Materials of H-Section Made of SS 400 by Boundary Conditions at High Temperature
p.51

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 886Effect of Extrusion on Mechanical Properties of...

Effect of Extrusion on Mechanical Properties of Spray Forming 8009 Heat Resistant Aluminum Alloy

Abstract:

The 8009 aluminum alloys were fabricated by spray forming and extrusion process. The microstructure and properties of the alloy were investigated by means of metallographic, scanning electron microscope and tensile test. The results indicate that at room temperature, the tensile strength of the extruded alloys can reach 415MPa, the yield strength 345MPa, elongation 22.5%. The tensile strength and yield strength of the alloys decrease with the increasing temperature, the plastic of alloys shows a down-up medium temperature brittleness law.

You might also be interested in these eBooks

Advanced Research on Material Science, Environment Science and Computer Science III

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 886)

Pages:

32-35

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.886.32

Citation:

Cite this paper

Online since:

January 2014

Authors:

Rong Hua Zhang, Bao Hong Zhu, Xiao Ping Zheng

Keywords:

Heat-Resistant Aluminum Alloy, Mechanical Property, Spray Forming

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Hariprasad S, Sastry S M L, Jerina K L, et a1. Microstructure and mechanical properties of dispersion-strengtened high-temperature A1-8. 5Fe1. 3V-1. 7Si alloys produced by atomized melt deposition process[J]. Metall Trans. 1993. 24(4): 865-875.

DOI: 10.1007/bf02656507

Google Scholar

[2] Subhash C, Khatri, Alan L, et a1. Creep and microstructural stability of dispersion strengthened A1-Fe-V-Si alloy[J]. Mater Sci and Eng. 1993, 167: 11-21.

Google Scholar

[3] Davies H A. Processing properties and applications of rapidly solidified advanced alloy powders[J]. Powder Metallurgy, 1990, 33(3): 223~228.

DOI: 10.1179/pom.1990.33.3.223

Google Scholar

[4] Hariprasad S. Elevated temperature mechanical properties of a rapidly solidified Al-Fe-V-Si alloy[J]. Scripta Metallurgical, 1992, 27(5): 521-526.

DOI: 10.1016/0956-716x(92)90333-a

Google Scholar

[5] ZHAN Mei-yan, CHEN Zhen-hua, XIA Wei-jun. Microstructure and properties of of spray-deposited heat-resistant FVS0812 aluminum alloy at high temperature[J]. The Chinese Journal of Nonferrous Metals, 2004, 14(8): 1348-1352.

Google Scholar