Fatigue Crack Growth Rate in Laser-Welded Web Core Sandwich Panels - Fatigue Crack Propagation in Welded Base Metal

Abstract:

The all-metal web-core sandwich structure consists of two face plates stiffened by one-directional system of web plates. These web core sandwich structures are used in many structural applications such as ship hulls, offshore platforms, bridge decks, and industrial platforms. However, the stress variation caused by the service loadings can be a determinant factor for crack initiation and growth until early failure of the entire structure. This paper presents an experimental study on fatigue crack growth rate in base material from a face plate after rolling and welding. The study is focused on the analysis of the stress ratio and crack closure effect on the fatigue crack growth rate in two directions. There is a significant stress ratio effect on fatigue crack growth rate, much more pronounced in the case of crack propagation in the longitudinal direction than in the transverse propagation. For all tests, the crack closure effect is more pronounced at low stress intensity factor range (in the threshold domain).

• Periodical: Advanced Materials Research (Volumes 891-892)
• Pages: 1212-1216
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.891-892.1212
• Online since: March 2014
• Authors: Anghel Cernescu*, Heikki Remes, Pauli Lehto, Jani Romanoff
• Keywords: Crack Closure, Fatigue Crack Growth Rate, R-Ratio, Web-Core Sandwich

References

[1] P. Kujala, T. Kukkanen, K. Kotisalo, Fatigue of all metal sandwich panels – Application for cruise ship longitudinal bulkhead and decks, M-237, ISBN 951-22-4404-7, Helsinki University of Technology, (1999).

[2] J. Kozak, Fatigue life of steel laser-welded panels, Polish Maritime Research, Special Issue, 2006/S1.

[3] D. Frank, J. Romanoff, H. Remes, Fatigue strength assessment of laser stake-welded web-core steel sandwich panels, Fatigue & Fracture of Engineering Materials & Structures, vol. 36, issue 8, pp.724-737, (2013).

DOI: 10.1111/ffe.12038

[4] ASTM E 647, Standard test method for measurement of fatigue crack growth rates.

[5] W. Elber, Fatigue crack closure under cyclic tension, Engineering Facture Mechanics, vol. 2, p.37 – 45, (1970).

[6] W. Elber, The significance of fatigue crack closure, ASTM STP 486, American Society for Testing and Materials, Philadelphia, p.230 – 242, (1971).

[7] A.H. Noroozi, G. Glinka, S. Lambert, A study of the stress ratio effects on fatigue crack growth using the unified two-parameter fatigue crack growth driving force, International Journal of Fatigue, 29: 1616 – 1633, (2007).

DOI: 10.1016/j.ijfatigue.2006.12.008

[8] X. Huang, T. Moan, Improved modeling of the effect of R-ratio on crack growth rate, International Journal of Fatigue, 29: 591-602, (2007).

DOI: 10.1016/j.ijfatigue.2006.07.014