Thermal Properties of Selected Lightweight Wooden Walls and Windows in the Regime of Long Time Testing

Abstract:

The article presents the partial knowledge of the area of building thermal physics. The goal is to evaluate the measured data ​​of the temperatures the lightweight-construction of external wall, which is made in three different material solutions and three different colored exterior side surfaces and evaluation of thermal parameters of three window constructions from different material and different glass systems. It is a measurement of two chambers of the pavilion type, where the samples are placed on the facade and they are exposed to the real action of external climatic factors. From the inside they are made ​​stationary conditions. The rooms have minimized heat loss of heat passing through interior walls and air filtration.Temperature measurements are made at different places of assessed constructions and they underway continuously throughout the year. The article will publish initial results only of temperature measurements. After completing the laboratory of additional sensors will be able to be processed year round thermal balance observed envelope and opening constructions.

• Periodical: Advanced Materials Research (Volume 899)
• Pages: 450-456
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.899.450
• Online since: February 2014
• Authors: Pavol Ďurica*, Mária Ďuriníková, Radoslav Ponechal, Daniela Štaffenová, Marianna Štúňová
• Keywords: Long Time Testing Measurements, Non-Steady State, Simulation, Steady, Temperature, Wooden Lightweight External Walls

References

[1] I. Chmúrny, Tepelná ochrana budov, Jaga Group, Bratislava, (2003).

[2] STN 73 0540: 2012 Tepelno-technické vlastnosti stavebných konštrukcií a budov. Tepelná ochrana budov. Časť 2: Funkčné požiadavky. Slovenský ústav technickej normalizácie, Bratislava, (2012).

[3] STN 73 0540: 2012 Tepelno-technické vlastnosti stavebných konštrukcií a budov. Tepelná ochrana budov. Časť 3: Vlastnosti prostredia a stavebných výrobkov, Slovenský ústav technickej normalizácie, Bratislava, (2012).

[4] M. Ďuriníková, P. Ďurica, The evaluation of temperature parameters in selected window structures dutiny different seasons, Conference XXII RUSSIAN – SLOVAK- POLISH SEMINAR, Žilina, Slovak Republic, (2013).

[5] M. Ďuriníková, P. Ďurica, The evaluation of temperature parameters in selected window during the whole year, Conference TRANSCOM Žilina, Slovak Republic, 20131.

[6] M. Štúňová, P. Ďurica, The course of temperatures in construction of lightweight external wall in stationary conditions of the internal environment and the actual conditions of outdoor climate, Conference TRANSCOM Žilina, Slovak Republic, (2013).

[8] L. Gustavsson, R. Sathre, Energy and CO2 analysis of wood substitution in construction. Climatic Change 1-2/2011, Springer Science+Business Media B.V. 2010, pp.129-153.

DOI: 10.1007/s10584-010-9876-8

[9] L. Gustavsson, A. Joelsson, Life cycle primary energy analysis of residential buildings. Energy and Buildings 42/2010, Springer, pp.210-220.

DOI: 10.1016/j.enbuild.2009.08.017

[10] L. Gustavsson and coll., The role of wood material for greenhouse gas migration. Mitigation and Adaptation Strategies for Global Change 11/2006: Springer 2006, pp.1097-1127.

DOI: 10.1007/s11027-006-9035-8

[11] I. Dimdina and coll., Testing of Energy - Efficient Building Envelope Materials in Natural Conditions, World Sustainable Energy Days 2013, European Nearly Zero Energy Buildings Conference (Wels, Austria).

[12] H. ASAN. Numerical computation of time lags and decrement factor for different building materials. Available online, november 2013: <http: /amet-me. mnsu. edu/ userfilesshared/solarwall/Solar %20 Passive %20 %28 Trombe %29 %20Wall%20 Documents/Technical%20Publications/ Numerical%20 computation%20of%20time%20lags %20and%20decrement%20factors%20for%20different%20building%20materials. pdf>.

DOI: 10.1016/j.buildenv.2005.02.020