Analysis on the Reasons of 500kV High-Voltage Disconnectors Hoop Fracture

Shuang Liu; Wei Tan Cui; Hong Wu Zhang; Yong Quan Ma

doi:10.4028/www.scientific.net/AMR.915-916.992

Paper Titles

Comparison on Separation of Low-Content Nickel and Cobalt in Bioleaching Solution in Different Extraction System
p.968

Analyses of Flow Field and Heat Exchange about Limestone Grain in the Preheater
p.974

Influence of Sieve Structural Parameters on Sieving of Shelled Buckwheat
p.978

A BP-ANN Based Surrogate Modeling for Predicting Engineering Analysis of Forging Press
p.987

Analysis on the Reasons of 500kV High-Voltage Disconnectors Hoop Fracture
p.992

Effects of Feed Angle on Mannesmann Piercing in Drill Steel Production
p.996

Effects of the Processing Parameters on Porosity of Selective Laser Sintered Aliphatic Polycarbonate
p.1000

Five-Axis Machining Method of Complicated Curved Surface
p.1005

Fracture of the Leads of Integrated Circuits with TO Package
p.1009

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 915-916Analysis on the Reasons of 500kV High-Voltage...

Analysis on the Reasons of 500kV High-Voltage Disconnectors Hoop Fracture

Abstract:

The fracture reasons of 500kV high-voltage disconnectors hoops were analyzed. The fracture appearance, composition of chemical elements, metallographic, mechanical properties of the fractured hoops were investigated by ICP-AES, SEM, optical microscope, brinell hardness tester, universal testing machine. The test results that one reason is substandard products of this batch hoop. The composition of chemical elements and mechanical properties is fails to comply with applicable standards prescribed and the casting defects are found. Another reason is that the large pre-tightening force and tightens reverse order.