Static Neutronics Analyses of Hellium-Cooled Solid Breeder Blanket

Jun Heng Li; Rong Hua Huang; Hao Ran Cao

doi:10.4028/www.scientific.net/AMR.953-954.631

Paper Titles

The Sources and Control of Tritium in Molten Salt Reactor
p.609

Through-and Out-Diffusion of Se(IV) and Re(VII) in Compacted Bentonite
p.614

Transient Analyses of Passive Residual Heat Removal System of 10MW Molten Salt Reactor Experiment
p.621

Theoretical Calculation and Numerical Investigation for the Effective Thermal Conductivity of Packed Li₂TiO₃ Pebble Bed
p.627

Static Neutronics Analyses of Hellium-Cooled Solid Breeder Blanket
p.631

A Review on the Development of Tidal Energy in China
p.637

Analysis on the Technical Solutions of the Heat Source of the Geothermal Heat Pump System
p.650

On Mathematical Modeling of Piezoelectric Energy Harvesters
p.655

Application Analysis of Heating Mode of Geothermal Direct Supply Combined with Water Source Heat Pump in Bohai Oil Base
p.659

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 953-954Static Neutronics Analyses of Hellium-Cooled Solid...

Static Neutronics Analyses of Hellium-Cooled Solid Breeder Blanket

Abstract:

A Monte Carlo N-particle transport code was used to study physics of the helium-cooled solid-breeder tritium breeding blanket in the Chinese Fusion Engineering Thermal Reactor （CFETR）for various volume ratio of the neutron multiplier and tritium breeder and various thickness of the first wall. A sandwich-type of Be and loading model is used to analyze the compact of volume ratio and the thickness of the first wall for the tritium breeding rate. The results of different volume ratio models show that the tritium breeding ratio would reach 1.51 for volume ratio from 2 to 5.And the results of the different first wall thickness show that the upper limit of the thickness should be 33mm to keep the tritium self-sustain.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 953-954)

Pages:

631-634

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.953-954.631

Citation:

Cite this paper

Online since:

June 2014

Authors:

Jun Heng Li, Rong Hua Huang, Hao Ran Cao

Keywords:

Blanket Technology, DEMO Blanket, HCPB, ITER, TBM

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Dj.M. Maric, P.F. Meier and S.K. Estreicher: Mater. Sci. Forum Vol. 83-87 (1992), p.119.

Google Scholar

[2] M.A. Green: High Efficiency Silicon Solar Cells (Trans Tech Publications, Switzerland 1987).

Google Scholar

[3] Y. Mishing, in: Diffusion Processes in Advanced Technological Materials, edtied by D. Gupta Noyes Publications/William Andrew Publising, Norwich, NY (2004), in press.

Google Scholar

[4] G. Henkelman, G. Johannesson and H. Jónsson, in: Theoretical Methods in Condencsed Phase Chemistry, edited by S.D. Schwartz, volume 5 of Progress in Theoretical Chemistry and Physics, chapter, 10, Kluwer Academic Publishers (2000).

Google Scholar

[5] R.J. Ong, J.T. Dawley and P.G. Clem: submitted to Journal of Materials Research (2003).

Google Scholar

[6] P.G. Clem, M. Rodriguez, J.A. Voigt and C.S. Ashley, U.S. Patent 6, 231, 666. (2001).

Google Scholar