Use of Methanol as a Coolant During Machining of Aluminum in a Shipbuilding Environment: A Failure to Assess and Manage Risk

Abstract:

Minimization of harm during the conduct of work is one of the most important tenets of industrial hygiene. Organizations make changes to solve perceived problems. What appears to be expedient for solving a problem can create serious risks totally unrecognized by the proponent. This investigation reports on such a situation involving the use of methanol as a lubricant during machining of aluminium panels using a router. Spot samples for methanol were measured using colorimetric detector tubes and samples of long duration by colorimetric diffusion tubes utilizing similar chemistry. Both were positioned in the breathing zone. Most of the spot samples exceeded the 8-hour TLV-TWA (Threshold Limit Value-Time-Weighted Average) of 200 ppm and the TLV-STEL (Short-Term Exposure Limit) of 250 ppm. The two long duration samples also exceeded the TLV-TWA. A change in the operation prevented collection of additional long duration samples. By these measures, workers were overexposed to methanol during this activity. An additional serious consequence from use of methanol in this manner was risk of fire. This situation illustrates the complexity of decisions affecting workplace operations. What appears to be expedient for solving a problem may be totally inappropriate.

• Periodical: Advanced Materials Research (Volumes 955-959)
• Pages: 1061-1064
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.955-959.1061
• Online since: June 2014
• Authors: Thomas Neil McManus, Assed N. Haddad
• Keywords: Aluminum (Al), Cutting, Machining, Methanol Exposure

References

[1] W.A. Burgess: Philosophy and Management of Engineering Control. In Harris RL, Cralley LJ, Cralley LV (eds. ). Patty's Industrial Hygiene and Toxicology, 3rd ed. Volume III, Part A. (John Wiley & Sons, Inc.; New York 1994).

DOI: 10.1002/jat.2550150515

[2] B.A. Plog (ed. ): Fundamentals of Industrial Hygiene, 3rd ed. (National Safety Council, Chicago 1988).

[3] United Nations: Globally Harmonized System of Classification and Labelling of Chemicals (GHS), 3rd rev. ed. (United Nations, New York and Geneva 2009).

DOI: 10.18356/e18d11a0-en

[4] Dräger: Dräger - Tubes & CMS – Handbook. (Dräger Safety, Lubeck (Germany) 2011).

[5] N.A. Leidel, K.A. Busch and J.R. Lynch: Occupational Exposure Sampling Manual, DHEW (NIOSH) Publication No. 77-173. (Department of Health, Education, and Welfare (US), Public Health Service, Center for Disease Control, National Institute for Occupational Safety and Health; Cincinnati (OH) 1977).

[6] ACGIH: Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices. (American Conference of Governmental Industrial Hygienists, Cincinnati (OH): (2013).

[7] 3M: 2009 Respirator Selection Guide. (3M, Occupational Health and Safety Division, St. Paul (MN) 2008).

[8] AIHA: Odor Thresholds for Chemicals with Established Occupational Health Standards. (American Industrial Hygiene Association, Akron (OH) 1989).

[9] N. Bollinger: NIOSH Respirator Selection Logic 2004. Cincinnati (OH): Department of Health and Human Services (US), Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health; 2004. DHHS (NIOSH) Publication No. 2005-100. 32 p.

[10] NIOSH: NIOSH Pocket Guide to Chemical Hazards, DHHS (NIOSH) Publication No. 2005-149, 3rd printing – September 2007, with minor technical changes. (Department of Health and Human Services (US), Centers for Disease Control, National Institute for Occupational Safety and Health, Cincinnati (OH) 2007).

DOI: 10.1016/s1074-9098(99)00094-5

[11] J.M. Kuchta: Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related Industries – A Manual, Bulletin 680. (Department of the Interior (US), Bureau of Mines, Washington (DC) 1985).

[12] Anonymous: Methanol. (Wikipedia Foundation, Wikipedia, San Francisco 2014). [cited 2014 Feb 13. Available from: en. wikipedia. org/wiki/Methanol.