Improvement of Stress Corrosion Cracking (SCC) Resistance of a 7150 Al-Zn-Mg-Cu Alloy by Retrogression and Reageing (RRA) Treatment

Abstract:

A 7150 Al-Zn-Mg-Cu alloy is artificially aged at 120 ^oC for varying time. The peak hardness (T6 temper) is obtained at about 24 h at that temperature. Further, the T6 temper is subjected to retrogression and reageing (RRA) treatment. Slow strain rate test (SSRT) has been carried out on the T6 and RRA tempers. SSRT results indicated that the RRA temper have higher resistance to SCC compared to that of T6 temper. SCC behaviour of the alloy tempers have been explained with the help of microstructural features studied by transmission electron microscope (TEM). The large, discrete and discontinuous grain boundary precipitates observed in the microstructure of the RRA temper are believed to be the responsible factor for achieving higher SCC resistance. Further, SEM fractographs and crack morphology have also been analyzed to evaluate the SCC behaviour of the alloy tempers.

• Periodical: Advanced Materials Research (Volumes 984-985)
• Pages: 529-535
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.984-985.529
• Online since: July 2014
• Authors: Prasanta Kumar Rout*, M.M. Ghosh, K.S. Ghosh
• Keywords: 7150 Al-Zn-Mg-Cu Alloy, RRA Treatment, SEM, Stress Corrosion Cracking (SCC), TEM

References

[1] A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, Recent development in aluminium alloys for aerospace applications, Mater. Sci. Eng. A 280 (2000) 102−107.

DOI: 10.1016/s0921-5093(99)00674-7

[2] J.C. Williams, E.A. Starke Jr., Progress in structural materials for aerospace systems, Acta Mater. 51 (2003) 5775−5799.

[3] M. Dixit, R.S. Mishra, K.K. Sankaran, Structure−properties correlation in Al 7055 high strength aluminium alloys, Mater. Sci. Eng. A 478 (2008) 163−172.

DOI: 10.1016/j.msea.2007.05.116

[4] M.B. Kanan, V.S. Raja, R. Raman, A.K. Mukhopadhyay, Influence of multistep ageing on stress corrosion cracking behaviour of aluminium alloy, Corrosion 59 (2003) 881−889.

DOI: 10.5006/1.3287709

[5] B. Cina, Reducing the susceptibility of alloys particularly aluminium alloys to stress corrosion cracking, US Patent 3856584, 24 December (1974).

[6] Y.P. Xiao, Q.L. Pan, W.B. Li, X.Y. Liu, Y.B. He, Influence of retrogression and reaging treatment on corrosion behaviour of an Al–Zn–Mg–Cu alloy, Mater. Des. 32 (2011) 2149–2156.

DOI: 10.1016/j.matdes.2010.11.036

[7] M. Baydogan, H. Cimenoglu, E.S. Kayali, J. Rasty, Improved resistance to stress-corrosion-cracking failures via optimized retrogression and reaging of 7075-T6 aluminium sheets, Metall. Mater. Trans. A 39 (2008) 2470−2476.

DOI: 10.1007/s11661-008-9595-1

[8] D.K. Xu, N. Birbilis, P.A. Rometsch, Effect of S- phase dissolution on the corrosion and stress corrosion cracking of an as-rolled Al-Zn-Mg-Cu alloy, Corrosion 68 (2012) 1−10.

DOI: 10.5006/1.3688501

[9] A. Venugopal, K. Sreekumar, V.S. Raja, Stress corrosion cracking behaviour of multi-pass TIG-welded AA2219 aluminium alloy in 3. 5 wt. % NaCl solution, Metall. Mater. Trans. A 43 (2012) 3135−3140.

DOI: 10.1007/s11661-012-1117-5

[10] N. Birbilis, R.G. Buchheit, Electrochemical characteristics of intermetallic phases in aluminium alloys, J. Electrochem. Soc. 152 (2005) 140–151.

DOI: 10.1149/1.1869984

[11] S.P. Knight, N. Birbilis, B.C. Muddle, A.R. Trueman, S.P. Lynch, Correlations between intergranular stress corrosion cracking, grain boundary microchemistry and grain boundary electrochemistry for Al–Zn–Mg–Cu alloys, Corros. Sci. 52 (2010).

DOI: 10.1016/j.corsci.2010.08.024