Process Parameters Studies on Density and Hardness of AlSi7Mg Alloy Developed by DMLS Method

Abstract:

Additive manufacturing is one of the emerging domains in the industry. The ability to build complex and accurate metallic prototypes is crucial in the verifying the design of many essential components. Direct metal laser sintering technique is a type of laser powder bed fusion methods that is used to print samples with good accuracy. Typically, Al alloys are used in these techniques, mainly due to their high mass to strength ratio and good corrosion resistance. These alloys are typically used in the automobile and aero-space industry. This research focus on the effects of DMLS technique on the density and hardness of the sample

• Periodical: Engineering Headway (Volume 1)
• Pages: 83-90
• DOI: https://doi.org/10.4028/p-v3k4Gj
• Online since: November 2023
• Authors: Krishnakant Bhole, L.H. Manjunath*, N.R. Thyagaraj, M. Ravi Kumar, Bincy Rose Vergis
• Keywords: AlSi7Mg, Density, DMLS, Hardness, Regression Analysis

References

[1] A. A Raus, M. S. Wahab, Z. Shayfull, K. Kamarudin and M. Ibrahim (2016) "The Influence of Selective Laser Melting Parameters on Density and Mechanical Properties of AlSi10Mg". MATEC Web Conf. Volume 78. Pp1-9.

DOI: 10.1051/matecconf/20167801078

[2] Bo Chen, Yongzhen Yao, Xiaoguo Song, Caiwang Tan, Liang Cao& Jicai Feng (2018) "Microstructure and mechanical properties of additive manufacturing AlSi10Mg alloy using direct metal deposition, Ferroelectrics", 523:1, 153-166, DOI:10.1080/00150193. 2018.1392147.

DOI: 10.1080/00150193.2018.1392147

[3] Wen Hao Kan, Yves Nadot, Matthew Foley, Lionel Ridosz, Gwénaëlle Proust, Julie M. Cairney, (2019) "Factors that affect the properties of additively manufactured AlSi10Mg: Porosity versus microstructure", Additive Manufacturing, Volume 29,2019, 100805.

DOI: 10.1016/j.addma.2019.100805

[4] L.P. Lam, D.Q. Zhang, Z.H. Liu & C.K. Chua (2015):" Phase analysis and microstructure characterisation of AlSi10Mg parts produced by Selective Laser Melting", Virtual and Physical Prototyping

DOI: 10.1080/17452759.2015.1110868

[5] Xian Wang, Liqun Li, Jingyu Qu & Wang Tao (2019): "Microstructure and mechanical properties of laser metal deposited AlSi10Mg alloys", Materials Science and Technology.

DOI: 10.1080/02670836.2019.1674022

[6] Alessandro Salmi & Eleonora Atzeni (2019): Residual stress analysis of thin AlSi10Mg parts produced by Laser Powder Bed Fusion, Virtual and Physical Prototyping

DOI: 10.1080/17452759.2019.1650237

[7] Lianfeng Wang, Xiaohui Jiang, Miaoxian Guo, Xiaogang Zhu & Biao Yan (2017): Characterisation of structural properties for AlSi10Mg alloys fabricated by selective laser melting, Materials Science-and-Technology 207-215

DOI: 10.1080/02670836.2017.1398513

[8] Mingqi Dong, Weiwei Zhou, Kohei Kamata, Naoyuki Nomura. (2020) "Microstructure and mechanical property of graphene oxide/AlSi10Mg composites fabricated by laser additive manufacturing" Materials Characterization, vol.170,110678.

DOI: 10.1016/j.matchar.2020.110678

[9] Xuanming Cai, Chenglong Pan, Junyuan Wang, Wei Zhang, Zhiqiang Fan, Yubo Gao, Peng Xu, Heyang Sun, Jun Li, Wenshu Yang (2022)" Mechanical behavior, damage mode and mechanism of AlSi10Mg porous structure manufactured by selective laser melting,Journal of Alloys, and Compounds-Volume8972022162933, https://doi.org/10.1016/j.jallcom.2021. 162933.

DOI: 10.1016/j.jallcom.2021.162933

[10] Wen Cheng, Yunzhong Liu, Xiaojun Xiao, Bin Huang, Zhiguang Zhou, Xiaohui Liu,(2022) "Microstructure and mechanical properties of a novel (TiB2+TiC)/AlSi10Mg composite prepared by selective laser melting", Materials Science and Engineering: A,Volume 834,2022,142435.

DOI: 10.1016/j.msea.2021.142435

[11] NesmaT.AboulkhairMarcoSimonelliLukeParryIanAshcroftChristopherTuckRichardHague (2019)"3D printing of Aluminum alloys: Additive Manufacturing of Aluminum alloys using selective laser melting" Progress in Materials Science, Centre for Additive Manufacturing, Faculty of Engineering, University of Nottingham, Nottingham NG8 1BB, United Kingdom

DOI: 10.1016/j.pmatsci.2019.100578

[12] Rosenthal, I., Stern, A. & Frage, N (2014) "Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology".

DOI: 10.1007/s13632-014-0168-y

[13] Metallogr. Microstruct. Anal. 3, 448–453 (2014)

[14] Erhard Brandl, Ulrike Hackenberger, Vitus Holzinger, Damien Buchbinder (2012)" Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior" Volume 34, February Pp 159-169.

DOI: 10.1016/j.matdes.2011.07.067

[15] Chithirai Pon Selvan, L. Girisha, Vishwanath Koti, Mahadev Madgule, Mahesh B Davanageri, Avinash Lakshmikanthan, Manjunath Patel GC, (2023) "Optimization of stir casting and drilling process parameters of hybrid composites" Journal of Alloys, and Metallurgical Systems, 3(100023) ISSN 2949-9178.

DOI: 10.1016/j.jalmes.2023.100023

[16] Rohith Sheshadri, Mohan Nagaraj, Avinash Lakshmikanthan, Manjunath Patel Gowdru Chandrashekarappa, Danil Yurievich Pimenov, Khaled Giasin, Raghupatruni Prasad, Szymon

[17] Wojciechowski (2021) "Experimental Investigation of Selective Laser Melting Parameters for Higher Surface Quality and Microhardness Properties: Taguchi and Super Ranking Concept Approaches". Journal of Materials Research and Technology-Elsevier. Volume 14, Pp 2586-2600, ISSN 2238-7854.

DOI: 10.1016/j.jmrt.2021.07.144

[18] Ajith B Suresh, Chithirai Pon Selvan, N Vinayaka, Manjunath Patel Gowdru Chandrashekarappa, Lakshmikanthan A, Ravichandra Rangappa, Sanket Shinde, Vinayak R Malik (2023)" Computational investigations of aluminum-based airfoil profiles of helical shaped vertical axis wind turbines suitable for friction stir joining and processing". International Journal on Interactive Design and Manufacturing (IJIDeM-Springer).

DOI: 10.1007/s12008-022-01181-9