A Review Study on Modifying Vortex Generators to Improve Thermal Performance in Single- and Two-Phase Flow in Circular Tubes

Abstract:

The literature about various modifications to the vortex generators as passive techniques and some combined techniques was discussed numerically and experimentally. In general, all vortex generators have a good coefficient of thermal performance compared to a plain tube. Most vortex generators don’t consume any amount of energy to perform their function, so can be considered a good tool to enhance the thermal performance coefficient in industrial applications, but they have the disadvantage of high pressure drop. When using vortex generators in two phase flow accelerated the process of transition between phases pattern in addition to increasing heat transfer. The inserted twisted tapes have a low pressure drop and good heat transfer efficiency, resulting in a thermal performance factor of 1.6.In addition, the easier to manufacture where can be changed in size and shape in proportion to the place of use inside the tubes also having a low cost, and do not consume any amount of energy to perform its function, the hybrid methods can be used with it, such as a twisted tape with nonfluids, which had proven effective in thermal performance coefficients, but their disadvantages include the high cost and risk of dealing with these materials ,bubble injectors can also be used, despite the fact that they require energy to operate. So, the twisted tapes inserted can be considered a best tool to be used in enhancing the thermal performance coefficient in various Industrial fields.Based on the reviewed literature, it was determined that the following research is limited and could garner more attention in the future: multiple coaxial cross-twisted tapes with different perforations, and twisted tapes with variable cross-section, typical twisted tapes with regular wavy edge, hybrid methods such as nanofluids and twisted tape can be used in multiphase flow.

• Periodical: Engineering Headway (Volume 8)
• Pages: 3-24
• DOI: https://doi.org/10.4028/p-1mvdHB
• Online since: June 2024
• Authors: Fawzi Sh. Alnasur*, Riyadh S. AL-Turaihi
• Keywords: Modifications, Single-Phase Flow, Thermal Performance Factor, Twisted Tapes, Two-Phase Flow, Vortex Generators

References

[1] Zhang, G., Liu, J., Sundén, B., & Xie, G. (2021). Combined experimental and numerical studies on flow characteristic and heat transfer in ribbed channels with vortex generators of various types and arrangements. International Journal of Thermal Sciences, 167, 107036.

DOI: 10.1016/j.ijthermalsci.2021.107036

[2] Abdolbaqi, M. K., Sidik, N. A. C., Rahim, M. F. A., Mamat, R., Azmi, W. H., Yazid, M. N. A. W. M., & Najafi, G. (2016). Experimental investigation and development of new correlation for thermal conductivity and viscosity of Bio Glycol/water based SiO2 nanofluids. International Communications in Heat and Mass Transfer, 77, 54-63.

DOI: 10.1016/j.icheatmasstransfer.2016.07.001

[3] A.K. Raj, M. Srinivas, S. Jayaraj, CFD modeling of macro-encapsulated latent heat storage system used for solar heating applications, Int. J. Therm. Sci. 139 (2019) 88–104.

DOI: 10.1016/j.ijthermalsci.2019.02.010

[4] P. Carr`ere, M. Prat, Impact of non-uniform wettability in the condensation and condensation-liquid water intrusion regimes in the cathode gas diffusion layer of proton exchange membrane fuel cell, Int. J. Therm. Sci. 145 (2019) 106045, https://doi.org/10.1016/j.ijthermalsci. 2019.106045.

DOI: 10.1016/j.ijthermalsci.2019.106045

[5] J.-Y. Park, H.-W. Dong, H.-J. Cho, J.-W. Jeong, Energy benefit of a cascade liquid desiccant dehumidification in a desiccant and evaporative cooling-assisted building air-conditioning system, Appl. Therm. Eng. 147 (2019) 291–301.

DOI: 10.1016/j.applthermaleng.2018.10.101

[6] D.T. Crane, L.E. Bell, Maximum temperature difference in a single-stage thermoelectric device through distributed transport properties, Int. J. Therm. Sci. 154 (2020) 106404.

DOI: 10.1016/j.ijthermalsci.2020.106404

[7] Y. Yan, Z. He, G. Wu, L. Zhang, Z. Yang, L. Li, Influence of hydrogels embedding positions on automatic adaptive cooling of hot spot in fractal microchannel heat sink, Int. J. Therm. Sci. 155 (2020) 106428, https://doi.org/10.1016/j. ijthermalsci.2020.106428.

DOI: 10.1016/j.ijthermalsci.2020.106428

[8] S.B. Ahangar, V. Konduru, J.S. Allen, N. Miljkovic, S.H. Lee, C.K. Choi, Development of automated angle-scanning, high-speed surface plasmon resonance imaging and SPRi visualization for the study of dropwise condensation, Exp. Fluid 61 (1) (2020) 12.

DOI: 10.1007/s00348-019-2844-9

[9] S.B. Ahangar, K. Bellur, E. Medici, K. Tajiri, J.S. Allen, C.K. Choi, Optical properties and swelling of thin film perfluorinated sulfonic-acid ionomer, ECS Trans. 92 (8) (2019) 197.

DOI: 10.1149/09208.0197ecst

[10] D. Yang, T.S. Khan, E. Al-Hajri, Z.H. Ayub, A.H. Ayub, Geometric optimization of shell and tube heat exchanger with interstitial twisted tapes outside the tubes applying CFD techniques, Appl. Therm. Eng. 152 (2019) 559–572.

DOI: 10.1016/j.applthermaleng.2019.01.113

[11] A. Karimi, A.A.A.A. Al-Rashed, M. Afrand, O. Mahian, S. Wongwises, A. Shahsavar, The effects of tape insert material on the flow and heat transfer in a nanofluid-based double tube heat exchanger: two-phase mixture model, Int. J. Mech. Sci. 156 (2019) 397–409.

DOI: 10.1016/j.ijmecsci.2019.04.009

[12] M. Bahiraei, N. Mazaheri, S.M. Hassanzamani, "Efficacy of a new graphene–platinum nanofluid in tubes fitted with single and twin twisted tapes regarding counter and co-swirling flows for efficient use of energy, Int. J. Mech. Sci. 150 (2019) 290–303.

DOI: 10.1016/j.ijmecsci.2018.10.036

[13] M.M.K. Bhuiya, M.M. Roshid, M.M.M. Talukder, M.G. Rasul, P. Das, Influence of perforated triple twisted tape on thermal performance characteristics of a tube heat exchanger, Appl. Therm. Eng. 167 (2020) 114769.

DOI: 10.1016/j.applthermaleng.2019.114769

[14] S. Eiamsa-ard, K. Wongcharee, Convective heat transfer enhancement using Ag-water nanofluid in a micro-fin tube combined with non-uniform twisted tape, Int. J. Mech. Sci. 146 (2018) 337–354.

DOI: 10.1016/j.ijmecsci.2018.07.040

[15] B. Sajadi, M. Soleimani, M.A. Akhavan-Behabadi, E. Hadadi, the effect of twisted tape inserts on heat transfer and pressure drops of R1234yf condensation flow: an experimental study, Int. J. Heat Mass Tran. 146 (2020) 118890, https://doi.org/.

DOI: 10.1016/j.ijheatmasstransfer.2019.118890

[16] Amirahmadi, S. A. J. J. A. D., Rashidi, S., & Esfahani, J. A. (2016). Minimization of exergy losses in a trapezoidal duct with turbulator, roughness and beveled corners. Applied Thermal Engineering, 107, 533-543.

DOI: 10.1016/j.applthermaleng.2016.06.182

[17] Nouri-Borujerdi, A., & Nakhchi, M. E. (2017). Optimization of the heat transfer coefficient and pressure drop of Taylor-Couette-Poiseuille flows between an inner rotating cylinder and an outer grooved stationary cylinder. International Journal of Heat and Mass Transfer, 108, 1449-1459.

DOI: 10.1016/j.ijheatmasstransfer.2017.01.014

[18] Nouri-Borujerdi, A., & Nakhchi, M. E. (2017). Heat transfer enhancement in annular flow with outer grooved cylinder and rotating inner cylinder: Review and experiments. Applied Thermal Engineering, 120, 257-268.

DOI: 10.1016/j.applthermaleng.2017.03.095

[19] A. Nouri-Borujerdi, M. Nakhchi, Experimental study of convective heat transfer in the entrance region of an annulus with an external grooved surface, Exp. Therm. Fluid Sci. 98 (2018) 557–562.

DOI: 10.1016/j.expthermflusci.2018.06.025

[20] M. Akbarzadeh, S. Rashidi, J. Esfahani, Influences of corrugation profiles on entropy generation, heat transfer, pressure drop, and performance in a wavy channel, Appl. Therm. Eng. 116 (2017) 278–291.

DOI: 10.1016/j.applthermaleng.2017.01.076

[21] J. Esfahani, M. Akbarzadeh, S. Rashidi, M. Rosen, R. Ellahi, Influences of wavy wall and nanoparticles on entropy generation over heat exchanger plat, Int. J. Heat Mass Tran. 109 (2017) 1162–1171.

DOI: 10.1016/j.ijheatmasstransfer.2017.03.006

[22] A. Nouri-Borujerdi, M. Nakhchi, Friction factor and Nusselt number in annular flows with smooth and slotted surface, Heat Mass Tran. (2018) 1–9.

DOI: 10.1007/s00231-018-2445-9

[23] N.M. Zade, S. Akar, S. Rashidi, J.A. Esfahani, Thermo-hydraulic analysis for a novel eccentric helical screw tape inserts in a three-dimensional tube, Appl. Therm. Eng. 124 (2017) 413–421.

DOI: 10.1016/j.applthermaleng.2017.06.036

[24] M. Nakhchi, J. Esfahani, Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape, Powder Technol. 339 (2018) 985–994.

DOI: 10.1016/j.powtec.2018.08.087

[25] Shakeel, M. R., & Mokheimer, E. M. (2022). Swirl flow in annular geometry with varying crosssection. Engineering Applications of Computational Fluid Mechanics, 16(1), 1154-1172.

DOI: 10.1080/19942060.2022.2076744

[26] Pourhedayat, Samira, et al. "Thermal-exergetic behavior of triangular vortex generators through the cylindrical tubes." International Journal of Heat and Mass Transfer 151 (2020): 119406.

DOI: 10.1016/j.ijheatmasstransfer.2020.119406

[27] Chamoli, Sunil, et al. "Heat transfer in a turbulent flow tube integrated with tori as vortex generator inserts." Applied Thermal Engineering 194 (2021): 117062.

DOI: 10.1016/j.applthermaleng.2021.117062

[28] Zhang, Kang, et al. "Effects of the configuration of winglet vortex generators on turbulent heat transfer enhancement in circular tubes." International Journal of Heat and Mass Transfer 157 (2020): 119928.

DOI: 10.1016/j.ijheatmasstransfer.2020.119928

[29] Yang, Zenan, et al. "Effects of longitudinal vortex generators on the heat transfer deterioration of supercritical CO2 in vertical tubes." International Journal of Heat and Mass Transfer 152 (2020): 119478.

DOI: 10.1016/j.ijheatmasstransfer.2020.119478

[30] Chen, Desheng, and Zhe Lin. "Numerical Investigation of Gas–Liquid Two-Phase Flow in a Swirl Meter." MAPAN 36.3 (2021): 521-532.

DOI: 10.1007/s12647-021-00468-8

[31] Ibrahim, Adnan Q., and Riyadh S. Alturaihi. "Experimental work for single-phase and two-phase flow in duct banks with vortex generators." Results in Engineering 15 (2022): 100497.

DOI: 10.1016/j.rineng.2022.100497

[32] Wang, Shuli, et al. "Study on the influence of coconut oil on flow pattern and pressure drop of two-phase swirl flow." RSC advances 9.56 (2019): 32644-32655.

DOI: 10.1039/c9ra05369g

[33] Wang, Shuli, et al. "Study on the influence of coconut oil on flow pattern and pressure drop of two-phase swirl flow." RSC advances 9.56 (2019): 32644-32655.

DOI: 10.1039/c9ra05369g

[34] Liu, Wen, Xiaofei Lv, and Bofeng Bai. "The effect of swirl on transition from churn flow to annular flow in an intermediate diameter pipe." Experimental Thermal and Fluid Science 109 (2019): 109861.

DOI: 10.1016/j.expthermflusci.2019.109861

[35] Liu, Wen, Xiaofei Lv, and Bofeng Bai. "Axial development of air–water annular flow with swirl in a vertical pipe." International Journal of Multiphase Flow 124 (2020): 103165.

DOI: 10.1016/j.ijmultiphaseflow.2019.103165

[36] Cai, Baowei, et al. "Experimental study and numerical optimization on a vane-type separator for bubble separation in TMSR." Progress in Nuclear Energy 74 (2014): 1-13.

DOI: 10.1016/j.pnucene.2014.02.007

[37] Sarmadian, Alireza, et al. "Flow boiling heat transfer and pressure drop characteristics of Isobutane in horizontal channels with twisted tapes." International Journal of Heat and Mass Transfer 162 (2020): 120345.

DOI: 10.1016/j.ijheatmasstransfer.2020.120345

[38] S. Rashidi, N.M. Zade, J.A. Esfahani, Thermo-fluid performance and entropy generation analysis for a new eccentric helical screw tape insert in a 3D tube, Chem. Eng. Process: Process Intensification 117 (2017) 27–37.

DOI: 10.1016/j.cep.2017.03.013

[39] M. Khoshvaght-Aliabadi, M. Eskandari, Influence of twist length variations on thermal–hydraulic specifications of twisted-tape inserts in presence of Cu–water nanofluid, Exp. Therm. Fluid Sci. 61 (2015) 230–240.

DOI: 10.1016/j.expthermflusci.2014.11.004

[40] S.W. Chang, B.J. Huang, Thermal performances of tubular flows enhanced by ribbed spiky twist tapes with and without edge notches, Int. J. Heat Mass Tran. 73 (2014) 645–663.

DOI: 10.1016/j.ijheatmasstransfer.2014.02.049

[41] S. Eiamsa-Ard, P. Promvonge, Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts, Int. J. Heat Mass Tran. 53 (2010) 1364–1372.

DOI: 10.1016/j.ijheatmasstransfer.2009.12.023

[42] Zhai, C., Islam, M. D., Alam, M. M., Simmons, R., & Barsoum, I. (2019). Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs. Applied Thermal Engineering, 153, 330-340.

DOI: 10.1016/j.applthermaleng.2019.03.018

[43] Kalateh, M. R., Kianifar, A.& Sardarabadi, M. (2022). A three-dimensional numerical study of the effects of various twisted tapes on heat transfer characteristics and flow field in a tube: Experimental validation and multi-objective optimization via response surface methodology. Sustainable Energy Technologies and Assessments, 50, 101798.

DOI: 10.1016/j.seta.2021.101798

[44] Tavakoli, Mohsen, and Mohammad Reza Soufivand. "Investigation of entropy generation, PEC, and efficiency of parabolic solar collector containing water/Al2O3− MWCNT hybrid nanofluid in the presence of finned and perforated twisted tape turbulators using a two-phase flow scheme." Engineering Analysis with Boundary Elements 148 (2023): 324-335.

DOI: 10.1016/j.enganabound.2022.12.022

[45] Liaw, Kim Leong, Jundika C. Kurnia, and Agus P. Sasmito. "Turbulent convective heat transfer in helical tube with twisted tape insert." International Journal of Heat and Mass Transfer 169 (2021): 120918.

DOI: 10.1016/j.ijheatmasstransfer.2021.120918

[46] Al-Obaidi, Ahmed Ramadhan, and Issa Chaer. "Study of the flow characteristics, pressure drop and augmentation of heat performance in a horizontal pipe with and without twisted tape inserts." Case Studies in Thermal Engineering 25 (2021): 100964. [34] Ju, Yongfeng, et al. "Evaluation of multiple semi-twisted tape inserts in a heat exchanger pipe using Al2O3 nanofluid." Nanomaterials 11.6 (2021): 1570.

DOI: 10.1016/j.csite.2021.100964

[47] Arasteh, Hossein, et al. "Effect of pitch distance of rotational twisted tape on the heat transfer and fluid flow characteristics." International Journal of Thermal Sciences 170 (2021): 106966.

DOI: 10.1016/j.ijthermalsci.2021.106966

[48] Al‐Obaidi, Ahmed Ramadhan. "Analysis of the flow field, thermal performance, and heat transfer augmentation in circular tube using different dimple geometrical configurations with internal twisted‐tape insert." Heat Transfer 49.8 (2020): 4153-4172.

DOI: 10.1002/htj.21821

[49] Yadav, Anil Singh, et al. "3-dimensional CFD simulation and correlation development for circular tube equipped with twisted tape." Materials Today: Proceedings 47 (2021): 2662-2668.

DOI: 10.1016/j.matpr.2021.02.549

[50] Yan, Tie, et al. "Numerical evaluation on the decaying swirling flow in a multi-lobed swirl generator." Engineering Applications of Computational Fluid Mechanics 14.1 (2020): 1198-1214.

DOI: 10.1080/19942060.2020.1816494

[51] Yang, Zimu, et al. "Numerical analysis of FLiBe laminar convective heat transfer characteristics in tubes fitted with coaxial cross twisted tape inserts." Frontiers in Energy Research 8 (2020): 178.

DOI: 10.3389/fenrg.2020.00178

[52] Nakhchi, M. E., Mohammad Hatami, and Mohammad Rahmati. "Experimental investigation of heat transfer enhancement of a heat exchanger tube equipped with double-cut twisted tapes." Applied Thermal Engineering 180 (2020): 115863.

DOI: 10.1016/j.applthermaleng.2020.115863

[53] Mushatet, Khudheyer S., Qais A. Rishak, and Mohsen H. Fagr. "Experimental and numerical investigation of swirling turbulent flow and heat transfer due to insertion of twisted tapes of new models in a heated tube." Applied Thermal Engineering 171 (2020): 115070. [42] Nakhchi, M. E., and J. A. Esfahani. "Numerical investigation of rectangular-cut twisted tape insert on performance improvement of heat exchangers." International Journal of Thermal Sciences 138 (2019): 75-83.

DOI: 10.1016/j.applthermaleng.2020.115070

[54] Kumar, NT Ravi, et al. "Effect of twisted tape inserts on heat transfer, friction factor of Fe3O4 nanofluids flow in a double pipe U-bend heat exchanger." International Communications in Heat and Mass Transfer 95 (2018): 53-62.

DOI: 10.1016/j.icheatmasstransfer.2018.03.020

[55] Liu, X., Ding, M., Bian, H., Yan, C., & Li, C. (2017, July). Numerical Study on Heat Transfer and Resistance of a Tube Fitted with New Twisted Tapes for Lubricating Oil. In International Conference on Nuclear Engineering (Vol. 57861, p. V008T09A052). American Society of Mechanical Engineers.

DOI: 10.1115/icone25-67766

[56] Bhattacharyya, Suvanjan, Himadri Chattopadhyay, and Ayan Haldar. "Design of twisted tape turbulator at different entrance angle for heat transfer enhancement in a solar heater." Beni-Suef University Journal of Basic and Applied Sciences 7.1 (2018): 118-126.

DOI: 10.1016/j.bjbas.2017.08.003

[57] Ramakumar, B. V. N., J. D. Arsha, and Praveen Tayal. "Tapered twisted tape inserts for enhanced heat transfer." Journal of Heat Transfer 138.1 (2016): 011901.

DOI: 10.1115/1.4031207

[58] Eiamsa-Ard, S., and P. Seemawute. "Decaying swirl flow in round tubes with short-length twisted tapes." International Communications in Heat and Mass Transfer 39.5 (2012): 649-656.

DOI: 10.1016/j.icheatmasstransfer.2012.03.021

[59] Eiamsa-Ard, S., et al. "Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics." International Communications in Heat and Mass Transfer 37.7 (2010): 850-856.

DOI: 10.1016/j.icheatmasstransfer.2010.05.012

[60] Razzaq, Ali K. Abdul, and Khudheyer S. Mushatet. "Evaluation the performance of the double tube heat exchanger by using combined twisted tube and nano fluid." (2021).

DOI: 10.18280/ijht.390521

[61] Sowi, Saadah Ahmad, Shahrir Abdullah, and Kamaruzzaman Sopian. "The effect of linearly increasing/decreasing pitch ratio twisted tape with various progression rate and nanofluid towards the system performance." Thermal Science and Engineering Progress 25 (2021): 100979.

DOI: 10.1016/j.tsep.2021.100979

[62] Eiamsa-ard, S., et al. "Influence of co/counter arrangements of multiple twisted-tape bundles on heat transfer intensification." Chemical Engineering and Processing-Process Intensification 160 (2021): 108304.

DOI: 10.1016/j.cep.2021.108304

[63] Liu, Wen, et al. "Two-phase flow pattern identification in horizontal gas–liquid swirling pipe flow by machine learning method." Annals of Nuclear Energy 183 (2023): 109644.

DOI: 10.1016/j.anucene.2022.109644

[64] Rao, Yongchao, et al. "Numerical Simulation on the Flow Pattern of a Gas–Liquid Two-Phase Swirl Flow." ACS omega 7.3 (2022): 2679-2689. [54] Zhao, Jinguo, et al. "Hydro-thermal and economic analyses of the air/water two-phase flow in a double tube heat exchanger equipped with wavy strip turbulator." Case Studies in Thermal Engineering 37 (2022): 102260.

DOI: 10.1016/j.csite.2022.102260

[65] Jadhav, Swati, et al. "Pressure drop prediction in flow boiling of R-407C in two phase flow using twisted tape insert in horizontal tube." AIP Conference Proceedings. Vol. 2341. No. 1. AIP Publishing, 2021.

DOI: 10.1063/5.0050373

[66] Hata, Koichi, and Suguru Masuzaki. "Heat transfer and critical heat flux of subcooled water flow boiling in a SUS304-tube with twisted-tape insert." (2011): 012001.

DOI: 10.1115/ihtc14-22225

[67] Tarasevich, S. E., et al. "Heat and mass transfer in tubes with various twisted tape inserts." ASME International Mechanical Engineering Congress and Exposition. Vol. 54969. 2011.

[68] Pourahmad, Saman, et al. "Experimental study of heat transfer and pressure drop analysis of the air/water two-phase flow in a double tube heat exchanger equipped with dual twisted tape turbulator: Simultaneous usage of active and passive methods." Journal of Energy Storage 44 (2021): 103408.

DOI: 10.1016/j.est.2021.103408

[69] Azizi, Zahra, et al. "Performance evaluation of horizontal straight tube equipped with twisted tape turbulator, with air–water two-phase flow as working fluid." Journal of Thermal Analysis and Calorimetry 147.6 (2022): 4339-4353.

DOI: 10.1007/s10973-021-10809-z

[70] Liu, P., et al. "Simulation of DNB-type critical heat flux (CHF) and pressure drop in subcooled flow boiling of water for tubes with twisted tape inserts under one-sided heating conditions." Fusion Engineering and Design 170 (2021): 112520.

DOI: 10.1016/j.fusengdes.2021.112520

[71] Moghaddam, Hadi Ahmadi, et al. "Condensation heat transfer and pressure drop characteristics of Isobutane in horizontal channels with twisted tape inserts." International Journal of Refrigeration 118 (2020): 31-40.

DOI: 10.1016/j.ijrefrig.2020.06.019

[72] Sajadi, B., et al. "The effect of twisted tape inserts on heat transfer and pressure drop of R1234yf condensation flow: An experimental study." International Journal of Heat and Mass Transfer 146 (2020): 118890.

DOI: 10.1016/j.ijheatmasstransfer.2019.118890

[73] Sarmadian, Alireza, et al. "Flow boiling heat transfer and pressure drop characteristics of Isobutane in horizontal channels with twisted tapes." International Journal of Heat and Mass Transfer 162 (2020): 120345.

DOI: 10.1016/j.ijheatmasstransfer.2020.120345

[74] Yan, Jianguo, et al. "Critical heat flux of highly subcooled water flow boiling in circular tubes with and without internal twisted tapes under high mass fluxes." International Journal of Heat and Mass Transfer 95 (2016): 606-619.

DOI: 10.1016/j.ijheatmasstransfer.2015.12.024

[75] Alnasur FS, Almansoori AC, AL-Furaiji MA, Kareem MI. A Study of the Chemical and Physical Properties of Cane as a Biofuel After Thermal Treatment Processes (Tarification). InJournal of Physics: Conference Series 2020 Nov 1 (Vol. 1664, No. 1, p.012133). IOP Publishing.

DOI: 10.1088/1742-6596/1664/1/012133

[76] Kanizawa, Fabio Toshio, Taye Stephen Mogaji, and Gherhardt Ribatski. "Evaluation of the heat transfer enhancement and pressure drop penalty during flow boiling inside tubes containing twisted tape insert." Applied Thermal Engineering 70.1 (2014): 328-340.

DOI: 10.1016/j.applthermaleng.2014.05.029

[77] Al-Furaiji, M.A., Alnasur, F.S. and Kareem, M.I., 2022, May. Regeneration equations for the Rankine cycle with super-heated steam. In IOP Conference Series: Earth and Environmental Science (Vol. 1029, No. 1, p.012015). IOP Publishing.

DOI: 10.1088/1755-1315/1029/1/012015

[78] Rao, Yong-chao, et al. "Flow pattern and pressure drop of gas-liquid two-phase swirl flow in a horizontal pipe." Journal of Central South University 26.9 (2019): 2528-2542.

DOI: 10.1007/s11771-019-4192-6