Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters

Chang Yi Liu; Cheng Long Chu; Wen Hui Zhou; Jun Jie Yi

doi:10.4028/www.scientific.net/KEM.407-408.608

Paper Titles

Dynamic Simulation and Cutting Conditions Optimization of Tee Slot Milling Based on CutPro Software
p.589

Predictive Tool Life Model of CBN in Ti6Al4V High Speed Turning and Cutting Parameter Optimization
p.594

Finite Element Analysis on Segmented Chip Formation for High Speed Cutting of Ti6Al4V Alloy
p.599

Effect of Co Content and WC Grain Size on Wear Resistance of Micro Carbide Endmills in High Speed Milling of Graphite
p.604

Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters
p.608

Application of Minimum Quantity Lubrication when Drilling Nickel-Based Superalloy at High Cutting Speed
p.612

Design of Angle Adjustable Electrochemical Micro-Machining System
p.619

Investigation of Surface Treatment Method by High-Speed Scanning of Single-Mode Fiber Laser with MOPA
p.624

Effect of Ultrasonic Vibration of Tool on Electrical Discharge Machining of Sintered NdFeB Magnet
p.628

HomeKey Engineering MaterialsKey Engineering Materials Vols. 407-408Taguchi Method Based Experiments of Titanium TC11...

Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters

Abstract:

Taguchi design methodology is applied to experiments of flank mill machining parameters of titanium alloy TC11 (Ti6.5A13.5Mo2Zr0.35Si) in conventional and high speed regimes. This study includes three factors, cutting speed, feed rate and depth of cut, about two types of tools. Experimental runs are conducted using an orthogonal array of L9(33), with measurement of cutting force, cutting temperature and surface roughness. The analysis of result shows that the factors combination for good surface roughness, low cutting temperature and low resultant cutting force are high cutting speed, low feed rate and low depth of cut.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 407-408)

Pages:

608-611

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.407-408.608

Citation:

Cite this paper

Online since:

February 2009

Authors:

Chang Yi Liu, Cheng Long Chu, Wen Hui Zhou, Jun Jie Yi

Keywords:

Flank Milling, Machining Parameters, Taguchi Method, TC 11 Titanium Alloy

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] E. O. Ezugwu, J. Bonney and Y. Yamane: J. Mater. Process. Technol. Vol. 134 (2003), p.233.

Google Scholar

[2] M. V. Ribeiro, M. R. V. Moreira and J. R. Ferreira: J. Mater. Process. Technol. Vol. 143 (2003), p.458.

Google Scholar

[3] G.S. Peace: Taguchi Methods, A Hands-on Approach, (Addision-Wesley, MA, 1992).

Google Scholar

[4] J. A. Ghani, I. A. Choudhury and H. H. Hassan: J. Mater. Process. Technol. Vol. 145 (2004), p.84.

Google Scholar

[5] F.C. Tsai, B.H. Yan, C.Y. Kuan and F.Y. Huang: Int. J. Mach. Tools Manuf. Vol. 48 (2008), p.932.

Google Scholar

[6] W.H. Yang and Y.S. Tarng: J. Mater. Process. Technol. Vol. 84 (1998), p.122.

Google Scholar

[7] Y. Yang, G. D. Janaki Ram, and B. E. Stucker. J. Eng. Mater. and Technol. Vol. 129 (2007) p.538.

Google Scholar

[8] J. Z. Zhang, J. C. Chen and E. D. Kirby: J. Mater. Process. Technol. Vol. 184 (2007), p.233.

Google Scholar