A Study into the Behavior of an Aluminum Foam under Compression

Abstract:

The characterization of a closed-cell aluminum foam with the trade name Alporas is carried out here under compression loading for a nominal cross-head speed of 1 mm/min. Foam samples in the form of cubes are tested in a UTM and the average stress-strain behavior is obtained which clearly displays a plateau strength of approximately 2 MPa. It is noted that the specific energy absorption capacity of the foam can be high despite its low strength which makes it attractive as a material for certain energy-absorbing countermeasures. The mechanical behavior of the present Alporas foam is simulated using cellular (i.e. so-called microstructure-based) and solid element-based finite element models. The efficacy of the cellular approach is shown, perhaps for the first time in published literature, in terms of prediction of both stress-strain response and inclined fold formation during axial crush under compression loading. Keeping in mind future applications under impact loads, limited results are presented when foam samples are subjected to low velocity impact in a drop-weight test set-up.

• Periodical: Key Engineering Materials (Volumes 535-536)
• Pages: 64-67
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.535-536.64
• Online since: January 2013
• Authors: C. Mahesh, Anindya Deb, S.V. Kailas, C. Uma Shankar, T.R.G. Kutty, K.N. Mahule
• Keywords: Aluminum Foam, Closed Cell, Compression Test, Finite Element Modeling (FEM), Impact

References

[1] S. Santosa and T. Wierzbicki, On the modeling of crush behavior of a closed-cell aluminum foam structure, J. Mech. Phys. Solids. 46(1998) 645-669.

DOI: 10.1016/s0022-5096(97)00082-3

[2] A. Czekanskia, M.S. Attiab, S.A. Meguidb, M.A. Elbestawia, On the use of a new cell to model geometric asymmetry of metallic foams, Finite Elements in Analysis and Design. 41 (2005) 1327–1340.

DOI: 10.1016/j.finel.2004.12.012

[3] M. Ashby, L. Gibson, A. Evans, Metal foams: A design guide, Butterworth-Heinemeann, 2000.

[4] Jeon, I, Katou, K, Sonoda, T, Asahina, T and Kang, KJ. 2009. Cell wall mechanical properties of closed-cell Al foam. Mech Mater. 41(2009) 60–73.

DOI: 10.1016/j.mechmat.2008.08.002