The Effect of SiC Coating on the Joint of C/C and LAS

Abstract:

The SiC coating on C/C composites was prepared by CVD and pack-cementation method in this paper, then SiC coated C/C composites was jointed with LAS glass ceramic at 1423K for 30min and the pressure of 15 MPa. The structure and morphology of the SiC coating and as-received joints were analyzed by SEM and XRD; shear strength of joint was examined through the Instron universal testing tensile machine. The results show that the thickness of SiC coating prepared by CVD is about 30μm, while the thickness of SiC layer by pack-cementation is nearly 100μm, and the layer is easier to connect with LAS glass ceramic owing to the rough surface and wedge-shaped structure on the SiC coating; the shear strength of joint between SiC coating coated C/C and LAS by pack-cementation is greater than the joint of C/C- LAS with SiC coating prepared by CVD.

• Periodical: Key Engineering Materials (Volume 537)
• Pages: 24-27
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.537.24
• Online since: January 2013
• Authors: Huan Xia Zhu, Ke-zhi Li, Jin Hua Lu, He Jun Li
• Keywords: C/C Composites, Joint, SiC Coating

References

[1] J.F. Huang, H.J. Li, X.R. Zeng, K.Z. Li, A new SiC/yttrium silicate/glass multi-layer oxidation protective coating for carbon/carbon composites. Carbon. 42 (2004) 2329.

DOI: 10.1016/j.carbon.2004.05.005

[2] S.Farhan, K.Z.Li, L.J. Guo, Novel thermal gradient chemical vapor infiltration process for carbon/carbon composites. New Carbon Materials. 22 (2007) 247-252.

DOI: 10.1016/s1872-5805(07)60020-1

[3] A. Ananthanarayanan, G.P. Kothiyal, L. Montagne, et al., MAS-NMR studies of lithium aluminum silicate (LAS) glasses and glass-ceramics having different Li2O/Al2O3 ratio. Journal of Solid State Chemistry. 183 (2010) 120-127.

DOI: 10.1016/j.jssc.2009.10.006

[4] Y.M. Sung, S.A. Dunn, J.A. Koutsky, The effect of boria and titania addition on the crystallization and sintering behavior of Li2O-Al2O3-4SiO2 glass. Journal of the European Ceramic Society. 14 (1994) 455-462.

DOI: 10.1016/0955-2219(94)90084-1

[5] X.Y. Zhai, W.C. Zhou, F. Luo, et al., Microstructure and Dielectric Properties of Chopping SiCf/LAS Composites. Rare Metal Materials and Engineering. 38 (2009) 2089-2092.

DOI: 10.1016/s1875-5372(10)60065-3

[6] P.F. Jame, Glass ceramics: new compositions and uses. Journal of Non-Crystal Solids. 181 (1995) 1-15.

[7] F.T. Lan, K.Z. Li, H.J. Li, Q.G. Fu, et al., Vitreous jointing of SiC-coated carbon/carbon composites. Materials Letters. 62 (2008) 2347-2350.

DOI: 10.1016/j.matlet.2007.11.100

[8] M. Salvo, P. Lemoine, M. Terraris, J. Am. Ceram. Joining of carbon-carbon composites for thermonuclear fusion applications. Journal of the American Ceramic Society. Soc. 80 (1997) 206.

DOI: 10.1111/j.1151-2916.1997.tb02811.x

[9] C. Xi, H.J. Li, K.Z. Li, Research of the joint of tungsten phenolic resin and carbon/carbon composite. Rare Met. Mater. Eng. 34 (2005) 367.

[10] J. L. Li, J. T. Xiong, F. S. Zhang.Transient liquid-phase diffusion bonding of two-dimensional carbon/carbon composites to niobium alloy. Mater Sci Eng A. 483-484(2008) 698~702

DOI: 10.1016/j.msea.2006.11.170

[11] Dadras P, Mehrotra G M. S. Joining of carbon/carbon composites using boron and titanium disilicide interlayers. Journal of the American Ceramic Society. 76 (1993) 1274-1280.

DOI: 10.1111/j.1151-2916.1997.tb02800.x

[12] Pan Y, Baptjista J L. Low-Temperature Sintering of Silicon Carbide with LiO2-A12O3-SiO2 Melts as Sintering Aids. Eur. Ceram. Soc. 16 (1996) 1221-1230.

DOI: 10.1016/0955-2219(96)00042-8

[13] X.Q. Lin, K.Z. Li, H.J. Li, et al., oining of Surface Modified Carbon/Carbon Composites and LAS Glass Ceramic. Acta Aeronauticaet Astronautica Sinica. Acta Aeronauticaet Astronautica Sinica. 30 (2009) 380-384.