Study on Extraction of Alumina from Sericite Phyllite

Article Preview

Abstract:

Alumina from sericite phyllite was extracted by the way of limestone self-pulverization sintering technique. The key technical processes, including self-pulverization sintering, clinker leaching reaction and the carbonation decomposition, were investigated systematically. The results showed that the main phases of pulverized clinker consisted of γ-C2S and C12A7, and the self-pulverization rate was 95% . The dissolution rate of Al2O3 clinker could reach 86.7% when the concentration of Na2CO3 solution was 7% and the solid-liquid ratio was 1:3. The Al(OH)3 prepared at 80°C carbonation temperature and pH=10.5 was relatively pure, with hexagonal plate-like crystals. The α-alumina could be acquired by calcination at 1200°C with the content of 99.71% Al2O3 and 0.02% Na2O. This work provided optimal technological parameters for effectively extracting alumina from the sericite and other inexpensive non-bauxite mineral resources with A/S ratio lower than 1.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

38-42

Citation:

Online since:

March 2013

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] K.B. Bengtson, A technological comparison of six processes for the production of reduction-grade alumina from non-bauxite raw materials, Light Metals. (1979) 217~282.

DOI: 10.1002/9781118647868.ch137

Google Scholar

[2] Y.Y. Liu, L.S. Li, Y. Wu, Z.Q. Ning, Furher utilization of fly ash-Extracting alumina, Light metals (in Chinese). 5 (2006) 20~23.

Google Scholar

[3] Z. Konik, A. Derdacka-Grzymek, A. Stok, J. Lwanciw, The utilization of fly ashes from various countries for alumina production, Light Met. (Wammiak. PA), (1994) 23~27.

Google Scholar

[4] Y.S. Tian, Study on extracting aluminum oxide from coal gangue, Industrial Minerals and Processing (in Chinese). 6 (2004), 15~17.

Google Scholar

[5] R.A. Mehmet, L.H. Halit, Investigation of the dissolution kinetics of kaolin in HCl solution, Hydrometallurgy. 68 (2003) 77~81.

DOI: 10.1016/s0304-386x(02)00193-7

Google Scholar

[6] F. Wang, H.W. Ma, J.M. Xu, Y.Z. Su, Sintering Reaction of Nepheline Syenite: Thermodynamic Analysis and Experimental Study, Geoscience (in Chinese). 4 (2006) 657~662.

Google Scholar

[7] H.W. Zhao, The comprehensive research and development of illite, Inorganic Chemicals Industry (in Chinese). 2 (1996) 27~28.

Google Scholar

[8] Y. Li, S.L. Zheng, Q.L. Xia, Y.C. Du, Research on comprehensive utilization of Alum petrochemical halloysite. 4 (1998) 16~17.

Google Scholar

[9] C.V. Phillips, K.J. Wills, A laboratory study of the extraction of alumina of smelter grade from China clay micaceous residues by a nitric acid route, Hydrometallurgy. 9 (1982) 15~28.

DOI: 10.1016/0304-386x(82)90050-0

Google Scholar

[10] H.W. Ma, Industrial Minerals and Rocks. Chemical Industry Press, Beijing, 2005, 8.

Google Scholar

[11] C.Z. Guo, B.Q. Chen, A process for the production of alumina, Chinese Patent 200410062965.X. (2004).

Google Scholar

[12] A.L. Vadim, I.D. Viktor, A. Andrey, Special requirements to aluminium hydroxide of non-metallurgical application, Light metals. (2002) 169~173.

Google Scholar