Effect of Process Parameters on the Joint Integrity in Friction Stir Welding of Ti-6Al-4V Lap Joints

Abstract:

Friction Stir Welding (FSW) is a solid state welding process patented in 1991 by TWI; initially adopted to weld aluminum alloys, is now being successfully used also for magnesium alloys, copper and steels. The wide diffusion the process is having is due to the possibility to weld materials traditionally considered difficult to be welded or “unweldable” by traditional fusion welding processes due to peculiar thermal and chemical material properties. Additionally, the process allows welding a wide range of sheet thickness (up to 50mm) avoiding typical fusion welding processes defects, like cavities and porosities, with no shielding gas, filling material or joint preparation. Recently, research is focusing on titanium alloys thanks to the high interest that such materials are getting from the industry due to the extremely high strength-weight ratio together with good corrosion resistance properties. Welding of titanium alloys by traditional fusion welding techniques presents several difficulties due to high material reactivity resulting in bonding with oxygen, hydrogen, and nitrogen with consequent embrittlement of the joint. In this way FSW can represent a cost effective and high quality solution. A few studies have been developed on the FSW of titanium alloys butt joints, while there is a complete lack of knowledge as far as different joint morphologies are regarded (lap joints, T joints, etc.). In the paper the results of an experimental campaign on lap joints made out of thin Ti-6Al-4V sheets are presented. The effect of the main process parameters on the micro and macro mechanical properties has been investigated and related to the microstructural transformations occurring during the process because of the thermo-mechanical action of the tool.

• Periodical: Key Engineering Materials (Volumes 554-557)
• Pages: 1083-1090
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.554-557.1083
• Online since: June 2013
• Authors: Gianluca Buffa, Livan Fratini, Matthias Schneider, Marion Merklein
• Keywords: Friction Stir Welding (FSW), Lap Joints, Titanium Alloy

References

[1] R.S. Mishra and Z.Y. Ma, Friction stir welding and processing, Mat Sci Eng R, 50 (2005) 1-78

[2] R. Nandan, T. DebRoy and H.K.D.H. Bhadeshia, Recent advances in friction-stir welding - Process, weldment structure and properties, Prog. Mater Sci., 53 (2008) 980-1023

DOI: 10.1016/j.pmatsci.2008.05.001

[3] Y.L. Qi, J. Deng, Q. Hong and L.Y. Zeng, Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet, Mat Sci Eng a-Struct, 280 (2000) 177-181

DOI: 10.1016/s0921-5093(99)00662-0

[4] A.B. Short, Gas tungsten arc welding of alpha plus beta titanium alloys: a review, Mater. Sci. Technol., 25 (2009) 309-324

[5] S. Mironov, Y. Zhang, Y.S. Sato and H. Kokawa, Development of grain structure in beta-phase field during friction stir welding of Ti-6Al-4V alloy, Scripta Mater., 59 (2008) 27-30

DOI: 10.1016/j.scriptamat.2008.02.014

[6] S. Pasta and A.P. Reynolds, Residual stress effects on fatigue crack growth in a Ti-6Al-4V friction stir weld, Fatigue Fract Eng M, 31 (2008) 569-580

DOI: 10.1111/j.1460-2695.2008.01258.x

[7] L. Fratini, F. Micari, G. Buffa and V.F. Ruisi, A new fixture for FSW processes of titanium alloys, Cirp Ann-Manuf Techn, 59 (2010) 271-274

DOI: 10.1016/j.cirp.2010.03.003

[8] W.B. Lee, C.Y. Lee, W.S. Chang, Y.M. Yeon and S.B. Jung, Microstructural investigation of friction stir welded pure titanium, Mater. Lett., 59 (2005) 3315-3318

DOI: 10.1016/j.matlet.2005.05.064

[9] Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park and S. Hirano, Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool, Mat Sci Eng a-Struct, 488 (2008) 25-30

DOI: 10.1016/j.msea.2007.10.062

[10] P.A.S. Colegrove, H.R.; Hyoe, T., Development of the TrivexTM Friction Stir Welding tool for making lap welds, 5th International Symposium on Friction Stir Welding, (2004)

DOI: 10.1002/9781118062302.ch30

[11] D. Fersini and A. Pirondi, Analysis and modelling of fatigue failure of friction stir welded aluminum alloy single-lap joints, Eng Fract Mech, 75 (2008) 790-803

DOI: 10.1016/j.engfracmech.2007.04.013

[12] H. Liu, K. Nakata, N. Yamamoto and J. Liao, Friction stir welding of pure titanium lap joint, Sci. Technol. Weld. Joining, 15 (2010) 428-432

DOI: 10.1179/136217110x12731414740031