Thixoforging of Ultrasound Treated 6060 Aluminum Alloy

Abstract:

In the last years researches on thixotropic materials have been developed in order to introduce this new technology in manufacturing processes. For instance, when considering high pressure die-casting, several applications are present in literature mainly related to low melting point alloys (Al and Mg) because of the limited die life experienced when casting higher melting materials. In this case, semi-solid metal forming allows to work at lower temperature with subsequent increase in die life and reduction in production costs, combined with lower porosity level in the casting. On the other hand, in the case of conventional forging, semi-solid processing needs higher performance materials and/or coatings for the mould because of the working temperatures; however, the advantages of obtaining near net shape part in a single step, with reduced machining and finishing costs, make the semi-solid technology competitive. The present paper deals with the thixoforging of aluminum 6061 alloy, whose semi-solid feedstock material was obtained by ultrasound treatment. The application of ultrasonic waves to liquid or solidifying alloys has been already demonstrated to be an effective technique for the obtainment of globular microstructure. Along with a refining effect, ultrasound can also produce a series of beneficial effects, such as hydrogen degassing or oxide and non-metallic inclusion removal, which all improve mechanical properties of the component. The aim of this research was to investigate the influence of process parameters on final forged part quality. The solid fraction percentage as a function of temperature was measured by differential scanning calorimetric analysis. The geometry of the die was properly designed and optimized by FEM simulation in order to be suitable for forging semi-solid material, allowing a comparison with conventional forging process. 14 K-type thermocouples were used for monitoring the temperature of top and bottom dies; an instrumented 100 ton press was also equipped with load cells to acquire the forging force. A deep metallurgical analysis of the forged parts was performed in order to evaluate their mechanical properties and quality.

• Periodical: Key Engineering Materials (Volumes 554-557)
• Pages: 572-581
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.554-557.572
• Online since: June 2013
• Authors: Annalisa Pola, Aldo Attanasio, Elisabetta Ceretti, Giovina Marina La Vecchia
• Keywords: Aluminium Alloy, Thixoforging, Ultrasound (US)

References

[1] P. Giordano, F. Boero, G. Chiarmetta, Thixoformed space-frame for series vehicles: study, development and applications, Proceedings of 6th Int. S2P Conf., Turin, (2000), 51-59.

[2] G. Hirt, R. Cremer, T. Witulski, H.C. Tinius, Lightweight near net shape components produced by thixoforming, Materials and Design, Vol. 18, Nos.4/6 (1997), 315-321.

DOI: 10.1016/s0261-3069(97)00071-x

[3] R. Moschini, Mass production of fuel rails by diecasting in SSL state, Proceedings of 3rd. Int. S2P Conf., Tokyo, (1994), 145-154.

[4] S. Chayong, H.V. Atkinson, P. Kapranos, Thixoforming 7075 aluminium alloys, Mater. Sci. Eng. (2005), 3-12.

DOI: 10.1016/j.msea.2004.05.004

[5] G. Hong-Min, Y. Xiang-Jie, Rheoforging of Wrought Aluminum Alloys, Solid State Phenomena Vols. 141-143 (2008), 271-276.

DOI: 10.4028/www.scientific.net/ssp.141-143.271

[6] H.V. Atkinson,  P. Kapranos, D.H Kirkwood., Alloy Development for Thixoforming, 6th Int. Conference on Semi Solid Processing of Alloys and Composites, Turin, (2000), 443-450.

[7] D. Liu, H.V. Atkinson, P. Kapranos , W. Jirattiticharoean, H. Jones, Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys, Mat. Sci. and Engineering: A, Vol. 361 1–2, 25 (2003), 213-224.

DOI: 10.1016/s0921-5093(03)00528-8

[8] G. Hirt, R. Kopp, Thixoforming: Semi-solid metal processing, Wiley-VCH Publisher, Germany, 2009.

[9] E. Giraud, M. Suéry, M. Coret, Mechanical Behavior of AA6061 Aluminum in the Semisolid State Obtained by Partial Melting and Partial Solidification, Metallurgical and Materials Transactions A, Vol. 41A (2010), 2257-68.

DOI: 10.1007/s11661-010-0268-5

[10] Y. Birol, Thixoforming of EN AW-2014 alloy at high solid fraction, J. of Mat. Processing Technology 211 (2011) 1749-1756.

DOI: 10.1016/j.jmatprotec.2011.05.016

[11] W. Lapkowski, Some studies regarding thixoforming of metal alloys, J. of Mat. Processing Technology 80-81 (1998), 463-468.

DOI: 10.1016/s0924-0136(98)00176-9

[12] M. M. Rovira, M. H. Robert, Effect of the thixoforging operation on the microstructure of AA 2001 alloy, 10th Jubilee International Scientific Conference, Achievements in Mechanical and Materials Engineering (2001).

[13] A. Bolouri, M. Shahmiri, C.G. Kang, Study on the effects of the compression ratio and mushy zone heating on the thixotropic microstructure of AA 7075 aluminum alloy via SIMA process, J. of Alloys and Compounds Vol. 509-2 (2011), 402–408.

DOI: 10.1016/j.jallcom.2010.09.042

[14] H.V. Atkinson, K. Burke, G. Vaneetveld, Recrystallisation in the semi-solid state in 7075 aluminium alloy, Mat. Sc. and Engineering: A Vol. 490 1–2, 25 (2008), 266–276.

DOI: 10.1016/j.msea.2008.01.057

[15] G. Vaneetveld, A. Rassili, J.-C. Pierret, J. Lecomte-Beckers, Improvement in Thixoforging of 7075 Aluminium Alloys at High Solid Fraction, Solid State Phenomena Vols. 141-143 (2008), 707-712.

DOI: 10.4028/www.scientific.net/ssp.141-143.707

[16] Z., Azpilgain, I. Hurtado, R. Ortubay, I. Landa, J. Atxa, Semisolid forging of 7000 series aluminum alloys, Solid State Phenomena Vols. 116-117 (2006), 758-761.

DOI: 10.4028/www.scientific.net/ssp.116-117.758

[17] G. Hong-Min, Y. Xiang-Jie, Rheoforging of Wrought Aluminum Alloys, Solid State Phenomena Vols. 141-143 (2008), 271-276.

DOI: 10.4028/www.scientific.net/ssp.141-143.271

[18] B.Y. Lou, J.C. Huang, T.D. Wang, T.G. Langdon, Flow behaviour of aluminium-based materials at ultrahigh temperatures in the presenceof a liquid phase, Materials Transactions Vol. 43-3 (2002), 501-509.

DOI: 10.2320/matertrans.43.501

[19] S.Y. Lee, S.I. Oh, Thixoforming characteristics of thermo-mechanically treated AA 6061 alloy for suspension parts of electric vehicles, J. of Mat. Proc. Technology Vol. 130 (2002), 587-59.

DOI: 10.1016/s0924-0136(02)00818-x

[20] Y. Birol, Solid fraction analysis with DSC in semi-solid metal processing, Journal of Alloys and Compounds 486 (2009), 173–177.

DOI: 10.1016/j.jallcom.2009.06.165

[21] A. Arrighini, A. Pola, R. Roberti, Effect of ultrasounds treatment on alloys for semisolid application, Solid State Phenomena, Vols. 141-143 (2008), 481-486.

DOI: 10.4028/www.scientific.net/ssp.141-143.481

[22] W.Y. Kim, C.G. Kang, B.M. Kim, Deformation behavior of wrought aluminum alloys in incremental compression experiment with a closed die, J. of Mat. Proc. Technology 191 (2007), 372–376.

DOI: 10.1016/j.jmatprotec.2007.03.100

[23] P.K. Seo, S.W. Youn, C.G. Kang, The effect of test specimen size and strain-rate on liquid segregation in deformation behavior of mushy state material, J. of Mat. Proc. Technology 130–131 (2002), 551–557.

DOI: 10.1016/s0924-0136(02)00762-8

[24] http://aluminium.matter.org.uk/aluselect/09_mech_browse.asp?