Thermal, Moisture and Energy Performance of a Hempcrete Test Structure in the Northern Prairie Climate of Manitoba, Canada

Abstract:

The processing of industrial hemp, cannabis sativa, results in three basic constituents seed, fibre, and hurd. Within Manitoba the main focus is with seed and oil products. When considering the entire plant approximately 60-70% is the predominantly cellulose woody core called the hurd. A combination of hemp hurd, a binder and water in various proportions is used in the construction of buildings referred to as hempcrete. Hempcrete is used as an environmental barrier providing resistance to heat transfer and to manage moisture of the building envelope. Engineering and architectural designers practicing in the field of non-conventional material applications have clearly indicated a need for design data. This paper presents a portion of research data collected over the past 18 months from a 23.8 m² (256 ft²) test building on the campus of the University of Manitoba at the Alternative Village. The design temperatures for this location range from-35°C to +32°C. The structure was built using 300 mm thick pre-fabricated hempcrete panels. In addition to indoor and exterior ambient conditions, the temperature is monitored at 40 locations within the envelope - at the interior, middle and exterior providing a profile through the wall system. Similarly, the relative humidity is monitored within the wall and used in conjunction with a sorption isotherm to estimate the moisture content within the assembly. The building is kept at a constant temperature during the heating season with the energy consumption monitored continuously. This building is one of several on the test site that are all identical in terms of size and configuration. This paper will provide a comparison between the thermal, moisture and energy performance of the hempcrete structure and a conventional wood frame, batt-insulated building that represents the vernacular construction in Manitoba.

• Periodical: Key Engineering Materials (Volume 600)
• Pages: 475-482
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.600.475
• Online since: March 2014
• Authors: Kris J. Dick, Jeremy Pinkos
• Keywords: Building Envelope, Energy Performance, Hempcrete, Moisture Performance

References

[1] Province of Manitoba. 2007. Background of Industrial Hemp. http: /www. gov. mb. ca/agriculture/crops/hemp/bko02s00. html (2012/12/12).

[2] Evrard, A., A. De Herde, J. Minet. 2006. Dynamical interactions between heat and mass flows in lime-hemp concrete. In Proceedings of the 3rd International Building Physics Conference – Research in Building Physics and Building Engineering, 69-76. Montreal, PQ. Aug 27-31.

DOI: 10.1177/1744259109355730

[3] Hirst, E. A. J., P. Walker, K. A. Paine, T. Yates. Characterization of low density hemp-lime composite building materials under compression loading. In Second International Conference on Sustainable Materials and Technologies, 1395-1406. Ancona, Italy. June 28-30.

[4] de Bruijn, P. B., K. -H. Jeppsson, K. Sandin, C. Nilsson. 2009. Mechanical properties of lime-hemp concrete containing shives and fibres. Biosystems Engineering 103: 474-479.

DOI: 10.1016/j.biosystemseng.2009.02.005

[5] Magniont, C., G. Escadeillas, C. Oms-Multon, P. De Caro. The benefits of incorporating glycerol carbonate into an innovative pozzolanic matrix. 2010. Cement and Concrete Research 40: 1072-1080.

DOI: 10.1016/j.cemconres.2010.03.009

[6] Whitmore, E. 2011. Determination of moisture content in hempcrete. Department of Biosystems Engineering, University of Manitoba. Undergraduate thesis.