Tribology Behavior of Graphene Containing Ni-Based Composite Coating under Room Temperature

Jian Liang Li; Juan Juan Chen; Dang Sheng Xiong; Yong Kang Zhang; Yong Kun Qin; Yong He

doi:10.4028/www.scientific.net/KEM.642.30

Paper Titles

Boundary Friction for a Line Contact Model: An Empirical Approach
p.8

Effect of Castor Oil and Biodiesel on Tribological Performance of Engine Oil
p.13

Study of Friction and Wear Behavior of C/C Composite under Electrical Sliding
p.19

Effects of Tungsten Addition on Mechanical and Tribological Properties of Carbon Nitride Prepared by DC Magnetron Sputtering
p.24

Tribology Behavior of Graphene Containing Ni-Based Composite Coating under Room Temperature
p.30

The Effects of Environmental Temperature and Humidity on the Friction and Wear Performance of PTFE Braided Composites
p.34

Studies on Centrifugal Clutch of Frictional Lining Materials
p.39

Corrosion and Wear Resistance of Electroplating Trivalent Chromium-Carbon Coating
p.45

Friction and Wear Characteristics of Hydrogenated and Hydrogen-Free DLC Coatings when Lubricated with Biodegradable Vegetable Oil
p.50

HomeKey Engineering MaterialsKey Engineering Materials Vol. 642Tribology Behavior of Graphene Containing Ni-Based...

Tribology Behavior of Graphene Containing Ni-Based Composite Coating under Room Temperature

Abstract:

The graphene containing Ni-based composite coatings with different graphene addition amounts were prepared on 45 steel surface by using dipulse composite electrodeposition technology. The tribological behavior of composite coating was tested by against GCr15 steel pin under the dry condition. The friction coefficient of composite coating is 20-30% lower than pure Cr coating, their wear rates are almost in the same magnitude. Compared with 45 steel, the friction coefficient of composite coating decreases and wear rate falls over 50%.