The Quest for Absolute Concrete Durability Performance Criteria

Abstract:

Deemed-to-satisfy durability requirements, as typically provided in code prescriptions (minimum cement content, maximum water cement ratio, minimum strength class) are now approaching their limits of applicability. With the implementation of new tailor-made binder types, including a multitude of powders (reactive and even non-reactive), the prescriptive parameters cement content and water/cement ratio become unclear and do not always correlate well with the real durability performance. While the equivalent concrete performance concept (ECPC) already offers a first way out of this debate, it still fundamentally maintains durability requirements at a deemed-to-satisfy level, as the new binder type needs to be experimentally calibrated relative to a standard solution. A more fundamental solution needs to consider the absolute durability performance of the concrete applied in the real structure. This performance needs to be evaluated in laboratory conditions (potential performance) as well as on the final structure (as-built performance). However, although straightforward in principle, the quest for absolute durability performance criteria is complicated, with remaining fundamental obstacles. This paper intends to give a general overview.

• Periodical: Key Engineering Materials (Volume 711)
• Pages: 599-606
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.711.599
• Online since: September 2016
• Authors: Geert de Schutter*
• Keywords: Concrete, Durability, Durability Criteria, Durability Indicators, Durability Performance

References

[1] G. De Schutter, Damage to Concrete Structures, CRC Press, Taylor & Francis Group, Boca Raton, USA, ISBN 978-0-415-60388-1, 2012, p.189.

[2] Information on http: /en. wikipedia. org/wiki/Sustainability.

[3] Information on http: /en. wikipedia. org/wiki/Durability.

[4] Information on http: /greensource. construction. com/people/2009/01_Sustainability. asp.

[5] Information on http: /2ndgreenrevolution. com/2011/08/20/durability-is-the-key-to-sustainability.

[6] G. De Schutter, No concrete is sustainable without being durable!, Proceedings of XIII International Conference on Durability of Building Materials and Components, Sao Paulo, September 2014, 49-56.

[7] Van den Heede, P. and De Belie, N., Environmental impact of life cycle assessment (LCA) of traditional and 'green' concretes: Literature review and theoretical calculations, Cement & Concrete Composites, 34, 2012, 431-442.

DOI: 10.1016/j.cemconcomp.2012.01.004

[8] G. De Schutter, Belgian implementation of the ECPC-concept following EN 206-1, 12th International Conference on Durability of Building Materials and Components, XII DBMC, Volume III, Eds. V. Peixoto de Freitas , H. Corvacho and M. Lacasse, FEUP, Porto, 2011, ISBN 978-972-752-132-6, 1593-1600.

[9] G. De Schutter, P. De Pauw, N. Reybrouck, R. Caspeele, Toward absolute durability performance criteria: preliminary case study of a sea lock, Journal of Sustainable Cement-based Materials, 2016, DOI: 10. 1080/21650373. 2015. 1077755.

DOI: 10.1080/21650373.2015.1077755

[10] Swiss Standard SIA 262/1: 2013, Concrete Structures – Supplementary Specifications", (in German and French). Annex E: 'Air-Permeability on the Structure.

[11] R.J. Torrent, A two-chamber vacuum cell for measuring the coefficient of permeability to air of the concrete cover on site, Materials and Structures, 25, 150, 1992, 358-365.

DOI: 10.1007/bf02472595

[12] F. Aracil, G. Dufour, P. Wauters, G. De Schutter, R. Torrent, Real Case: Assessing Sulfate Resistance of Coastal Protection Precast Elements, Proceedings of 8th International Conference on Concrete Under Severe Conditions-Environment & Loading, Lecco, September (2016).

DOI: 10.4028/www.scientific.net/kem.711.327

[13] V. Baroghel-Bouny, T.Q. Nguyen, P. Dangla, Assessment and prediction of RC structure service life by means of durability indicators and physical/chemical models, Cement and Concrete Composites, 2009, 31, 522-534.

DOI: 10.1016/j.cemconcomp.2009.01.009

[14] M.G. Alexander, Y. Ballim, K. Stanish, A framework for use of durability indexes in performance-based design and specifications for reinforced concrete structures, Materials and Structures, 2008, 41, 921-936.

DOI: 10.1617/s11527-007-9295-0