A Reformulation of a Multi-Axial Failure Criterion for the Concrete

Abstract:

The research of a failure criterion for concrete under multi-axial stresses is a very important task because of the numerous civil engineering applications. Nowadays several concrete failure tests are available in literature and various criteria have been proposed. A multi-axial failure criterion for the concrete founded on a simple physical basis, has been proposed by one of the authors. In this paper a sharper foundation of this criterion is given. The hardened cement paste (hcp), the binder of all the aggregate particles, is responsible of the concrete strength. Consequently, a preliminary average evaluation of the stresses, occurring, when the concrete is loaded, into the various phases components, and particularly in the hcp, is necessary to analyse the failure. To that end, the paper revolves around the analysis of the thermal behaviour of the concrete at its early stage of setting. It is shown that the heat production during the cement hydration process, is responsible to produce clearances among the various particles and the surrounding hcp that, in turn, the consequent statically determined structure of the concrete. Validation of this result comes out by analysing the elastic moduli and the thermal expansion coefficients. The micro-macro failure condition of Como & Luciano thus receives a sounder physical basis.

• Periodical: Key Engineering Materials (Volume 711)
• Pages: 822-829
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.711.822
• Online since: September 2016
• Authors: Simona Coccia, Mario Como*, Fabio di Carlo
• Keywords: Concrete, Failure Criterion, Iso-Stress Model, Thermal Behaviour

References

[1] Como, M., & Luciano, R. (2007). A new multi-axial failure criterion for concrete. In Proceedings of the 6th international conference on fracture mechanics of concrete and concrete structures (Vol. 1, pp.437-43).

[2] Askeland, D. R., Phulé, P. P., Wright W. J. (2010). The science and engineering of materials. 6th ed.

[3] Reuss, A. (1929). Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 9(1), 49-58.

DOI: 10.1002/zamm.19290090104

[4] Voigt, W. (1928). Lehrbuch der Kristallphysik. Teubner, Leipzig (1928), p.978.

[5] Collepardi, M., Collepardi, S., & Troli, R. (2009). Il nuovo calcestruzzo. Tintoretto.

[6] Mikulić, D., Milovanović, B., & Gabrijel, I. (2013). Analysis of thermal properties of cement paste during setting and hardening. In Nondestructive Testing of Materials and Structures (pp.465-471). Springer Netherlands.

DOI: 10.1007/978-94-007-0723-8_66

[7] Van Mier, J. G. (1996). Fracture processes of concrete (Vol. 12). CRC press.

[8] Leon, A. (1935). Ueber die scherfestigkeit des betons. Beton und Eisen, 34(8), 130-135.

[9] Hoek, E., & Brown, E. T. (1980). Empirical strength criterion for rock masses. Journal of Geotechnical and Geoenvironmental Engineering, 106 (ASCE 15715).

[10] Kupfer, H. B., & Gerstle, K. H. (1973). J. engng Mech. Div. In Am. Soc. civ. Engrs (Vol. 99, pp.853-866).

[11] Ottosen, N. S. (1977). A failure criterion for concrete. Journal of Engineering Mechanics, (103), 527-535.

[12] Menetrey, P., & Willam, K. J. (1995). Triaxial failure criterion for concrete and its generalization. ACI structural Journal, 92(3), 311-318.

DOI: 10.14359/1132

[13] McClintock, F. A., & Argon, A. S. (1966). Mechanical behavior of materials. BOOKS.