Development of Oil Palm Empty Fruit Bunch Fiber Reinforced Epoxy Composites for Bumper Beam in Automobile

Abstract:

This research aims to use oil palm empty fruit bunch (EFB) fibers to reinforce epoxy resin for bumper beam in cars to replace epoxy/glass fiber composite. EFB fibers were extracted by two methods; chemical method by treating with 10-30% sodium hydroxide (% by weight of fiber) and mechanical method by steam explosion process at 12-20 kgf/cm² for 5 mins. Then, the obtained fibers were bleached by hydrogen peroxide. The results show that the chemical method can eliminate lignin better than the other and provided stronger fibers. Increasing of alkaline concentration yielded the decrease of lignin content and increase of cellulose content, while no significant difference on fiber size and strength was observed. In steam explosion method, increasing of pressure vapor affected to more dark brown color and disintegrated fibers. Therefore, the optimal method for preparing EFB fibers for reinforcement of epoxy composite was chemical treatment using 30%NaOH, followed by bleaching. Then, the EFB fibers extracted by chemical method at 30%NaOH were used for reinforcing epoxy composite with fiber contents of 0-10%w/w and compared to epoxy/glass fiber composite. The results show that flexural modulus did not increase with increasing fiber content. However, the chemical treated fibers can support composite from falling apart after testing like glass fiber reinforced composite with fiber contents upper than 7.5%w/w. Impact strength and storage modulus of alkaline treated palm fiber reinforced composites increased when fiber content more than 7.5%w/w. Thermal properties of composite, analyzed by DSC and DMTA, shows that the Tg increased with fiber content. Flexural modulus and thermal properties of EFB reinforced epoxy composites provided similar results to glass fiber reinforced composites. Therefore, EFB fiber reinforced epoxy composite could be an alternative green material for bumper beam in automobile.

• Periodical: Key Engineering Materials (Volume 751)
• Pages: 779-784
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.751.779
• Online since: August 2017
• Authors: Suteera Witayakran, Wuttinan Kongtud, Jirachaya Boonyarit, Wirasak Smitthipong, Rungsima Chollakup*
• Keywords: Bumper Beam, Epoxy Composites, Oil Palm Empty Fruit Bunch Fiber

References

[1] R. Chollakup, W. Smitthipong, P. Suwanruji, Environmentally friendly coupling agents for natural fibre composites. In: M.J. John, S. Thomas (Eds) Natural Polymers, Volume I Composites. Cambridge, The Royal Society of Chemistry, 2012, p.161–182.

DOI: 10.1039/9781849735193-00161

[2] S.H. Lee, S. Wang Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent. Composites A, 37 (2006) 80–91.

DOI: 10.1016/j.compositesa.2005.04.015

[3] N. Chand, U.K. Dwivedi, Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites. Wear, 261 (2006) 1057–1063.

DOI: 10.1016/j.wear.2006.01.039

[4] N. Sgriccia, M.C. Hawley, M. Misra, Characterization of natural fiber surfaces and natural fiber composites. Composites A, 39 (2008) 1632–1637.

DOI: 10.1016/j.compositesa.2008.07.007

[5] N. Reddy, Y. Yang, Biofibers from agricultural byproducts for industrial applications, Trends Biotech. 23 (2005) 22-27.

DOI: 10.1016/j.tibtech.2004.11.002

[6] D. Bachtiar, S.M. Sapuan, M.M. Hamdan, Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites, IJAME. 1 (2010) 79-90.

DOI: 10.15282/ijame.1.2010.7.0007

[7] P. Suwanruji, W. Smitthipong, R. Chollakup, Chapter 5. Purpose of natural fiber surface treatment and coupling agent in bio-based composites, in: W. Smitthipong, R. Chollakup, M. Nardin (Eds. ), Bio-Based Composites for High-Performance Materials From Strategy to Industrial Application, CRC Press, Taylor & Francis Group, FL, 2014, pp.59-86.

DOI: 10.1201/b17601

[8] P. Wambua, J. Ivens, I. Verpoest, Natural fibres: can they replace glass in fibre reinforced Plastics. J. Comp. Sci. Tech. 63 (2003) 1259-1264.

DOI: 10.1016/s0266-3538(03)00096-4

[9] J.Y. Zhu, X.J. Pan, Woody biomass pretreatment for cellulosic ethanol production: Technology and energy consumption evaluation, Bioresource Technol. 101 (2010) 4992-5002.

DOI: 10.1016/j.biortech.2009.11.007

[10] R.M. Rowell, The State of Art and Future Development of Bio-Based Composite Science and Technology Towards the 21st Century, Paper presented at Fourth Pacific Rim Bio-Based Composites Symposium, Indonesia, November 2–5, (1998).

[11] H.R. Ismail H R, N. Rosnah, Curing characteristics and mechanical properties of short oil palm fibre reinforced rubber composites, Polym. 38 (1997) 4059-6064.

DOI: 10.1016/s0032-3861(96)00993-7

[12] Information on http: /203. 151. 46. 10/anda/krabi/ km-palm /techno-ol. html.

[13] M.J. Suriani, M.M. Hamdan, H.Y. Sastra, S.M. Sapuan, Study of interfacial adhesion of tensile specimens of Arenga Pinnata fiber reinforced composites, Multidiscipline Model. Mater. Struc., 3 (2007) 213–224.

DOI: 10.1163/157361107780744360

[14] S. Witayakran, S. Tanpichai, Properties of cellulose microfibers extracted from pineapple leaves by steam explosion, Adv. Mater. Res. 1131 (2016), 231-234.

DOI: 10.4028/www.scientific.net/amr.1131.231

[15] S. Mishra, M. Misra, S. Tripathy, S.K. Nayak, A.K. Mohanty, Potentiality of pineapple leaf fibre as reinforcement in PALF-polyester composite: surface modification and mechanical performance. J. Reinforced Plas. Compos., 20 (2001) 321-334.

DOI: 10.1177/073168401772678779

[16] P. Juan, P. Naughton, R. Lee, Evoluation of instrument panels made of polypropylene. SAE Technical paper. 980067 (1998) 7-14.

DOI: 10.4271/980067