Compositions Based on Nanosized Powders Carbides of Tungsten and Titanium, Obtained by the Method Self-Propagating High Temperature Synthesis for the Modification of Gray Cast Iron and Steel 110g13L

Abstract:

Iron-based alloys (steel and cast iron) are currently the main structural materials that provide a high level of mechanical and technological properties along with a relatively low cost. Increasing the performance characteristics (tensile strength, hardness, wear resistance, corrosion resistance and, ultimately, service life) of cast irons and steels is an urgent task. The quality of castings made of cast iron and steel depends on many technological parameters that affect the processes of crystallization of the melt (casting temperature, molding mixture, chemical composition, volume of casting, overheating of the metal during smelting, etc.). It is possible to improve the quality of castings without changing the technology of smelting and pouring metal into molds, if you learn how to manage the crystallization process. The laboratories have grown defect – free iron crystals with a tensile strength of more than 1000 kg/m2 (strength of carbon steel-40 kg/m2). Attempts to improve the mechanical properties by creating a single crystal are not justified, so you have to go the opposite way-to influence the crystallization process to get a lot of small crystals (grains), which also allows you to achieve high mechanical properties. The dependence of the strength characteristics on the grain size is well described by the law of Hall-Petch, according to which when the average grain size is reduced by 3...5 times there is an increase in the hardness of the material, with a further decrease in the average grain size by more than 10 times – an increase in plasticity. Influence on the processes of crystallization of iron and steel melts (change the size of metal grains, change the shape, size and distribution of graphite inclusions) can be the introduction of small additives substances (modifiers), not chemically interacting with the matrix. The use of modifiers to increase the rate of crystallization, reduce the structural heterogeneity of castings has good prospects. In addition, unlike doping, modification does not require a large number of expensive additives and, accordingly, slightly increases the final cost of production.

• Periodical: Key Engineering Materials (Volume 802)
• Pages: 43-56
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.802.43
• Online since: May 2019
• Authors: Mikhail Georgievich Leontiev
• Keywords: Building Material Technology, Carbide, Composition, Mixes, Self-Propagating, Steel Modification, Titanium

References

[1] A Nanodisperse modification of steel 110G13L / Poluboyarov V. A., Lyakhov N. Z. Korotaeva, Z., Zhdanok, A., Kuznetsov, V., in the interests of sustainable development. 2016. Vol. 24. No. 2. P. 187-191.

[2] Changes in the structure and properties of the alloys in their modification by carbide-silicon nanopowders / Korotaeva, Korotaeva, A. Cherepanov, A. A. Zhdanok, V. Kuznetsov, N. In.Stepanova, LI Jian-wei, CHEN Mei-ling, GAO Hong // VI international Congress non-Ferrous metals,, 2011. Responsible editors: CHL.-Corr. RAS G. L. Pashkov, prof. P. V. Polyakov 7-9 September 2011, Russia, Krasnoyarsk, pp.719-729.

[3] Impact modifiers produced by plasma-chemical and SVS methods, performance characteristics of grey cast iron of the in form when modifying / VA Poluboyarov, Z. A. Korotaeva, A. A. Zhdanok, V. A. Kuznetsov, Yu. V. Tsvetkov, A.V. Samokhin, A. A. Batayev, N. In. Stepanova // Technology hardening, coating and repair: theory and practice: part 2 Part 1: proceedings of the 15th International scientific-practical conference. - St. Petersburg Polytechnic publishing House. UN-TA-2013. - P. 301-306.

DOI: 10.17073/0368-0797-2015-8-561-566

[4] Influence of modifiers on the basis of carbide of silicon on the crystallization processes of cast iron of the in form when modifying / VA Poluboyarov, Z. A. Korotaeva, A. A. Zhdanok, V. A. Kuznetsov, A. A. Batayev, N. In. Stepanova // Technology hardening, coating and repair: theory and practice: part 2 Part 1: proceedings of the 15th International scientific-practical conference. - St. Petersburg Polytechnic publishing House. UN-TA-2013. - P. 295-300.

[5] Obtaining nanodispersed powders of carbides of tungsten and titanium by self-propagating high-temperature synthesis / VA Poluboyarov, Z. A. Korotaeva, A. A. Zhdanok, V. A. Kuznetsov // Actual problems of natural and mathematical Sciences": materials of international correspondence scientific-practical conference. (04 March 2013) — Novosibirsk: Ed. "Sibak,, 2013. - 118 p.

DOI: 10.1134/s002016851405015x

[6] On the crystallization of alloys of the system Cu–Ni–Mn / VA Poluboyarov, Z. A. Korotaeva, A. N. Cherepanov, A. A. Zhdanok, V. A. Kuznetsov, N. In. Stepanova, LI Jian-wei, CHEN Mei-ling, GAO Hong // Collection of papers of the 4th international Congress non-ferrous metals,, 2012, p.729.

[7] The influence of composition and concentration of nanoscale modifiers on the performance of grey cast iron of the in form when modifying / VA Poluboyarov, Z. A. Korotaeva, A. A. Zhdanok, V. A. Kuznetsov, Yu. V. Tsvetkov, A.V. Samokhin, A. A. Batayev, N. In. Stepanova N. / / technology of hardening, coating and repair: theory and practice: in 2 part 1: Proceedings of the 15th International scientific and practical conference. – SPb – I Polytechnic. UN-TA-2013. - P. 358-365.

DOI: 10.17073/0368-0797-2015-10-728-734

[8] The influence of modification of cast irons with silicon carbide nanoporosity on their structure and properties / V. A. Poluboyarov, Z. A. Korotaeva, A. N. Cherepanov, A. A. Zhdanok, V. A. Kuznetsov, N. In.Stepanova, LI Jian-wei, CHEN Mei-ling, GAO Hong // prospects of development of technologies for processing of secondary resources in Kuzbass. Environmental, economic and social aspects. 10-12 October 2012, pp.141-159, Novokuznetsk.

[9] Zhdanok, A. A. Inoculation of cast iron compositions based on nanosized powders of carbides of W and Ti. (Modification of grey cast iron by compositions based on nano-disperse powders of tungsten and titanium carbides) / Poluboyarov V. A., Korotaeva Z. A., Zhdanok A. A., Gorbunov F. K. // metallurgija MASHINOSTROENIJA. 2017. No. 3. 2-6. Publications in other publications.

DOI: 10.17516/1999-494x-0128

[10] Zhdanok, A. A. Nanodisperse (110G13L) steel Modification / Vladimir A. Poluboyarov, Zoya A. Korotaeva, Alexander A. Zhdanok, and Victor. // Journal of Siberian Federal University. Engineering & Technologies. 2016. 9 (1). R. 117-125.

DOI: 10.17516/1999-494x-2016-9-1-117-125

[11] Khorin A.N., Potanina Y.M., Brovkin A.V. Legal Regulation of Socially-Oriented Legal Technique // UTOPÍA Y PRAXIS LATINOAMERICANA. AÑO: 23, n° 82 (JULIO-SEPTIEMBRE), 2018, pp.423-431.

[12] Lutskiy, D., Litvinova, T., Oleijnik, I., Fialkovskiy, I. Effect of anion composition on the extraction of cerium (Iii) and yttrium (Iii) by oleic acid (2018) ARPN Journal of Engineering and Applied Sciences, 13 (9), pp.3152-3161.

[13] Cheremisina, O., Lutsky, D., Fedorov, A. Comparison of extraction methods for extraction of iron, aluminum, manganese and titanium using carboxylic acids and natural vegetable oils from water-salt systems (2017) International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 17 (11), pp.803-810.

DOI: 10.5593/sgem2017/11/s04.102

[14] Abramov, R., Sokolov, M., Surilov, M., & Morozov, I. (2018). The simulation of the development of innovation systems in the countries-participants of the union state. International Journal of Mechanical Engineering and Technology, 9(7), 1112-1119.