Paper Titles
Isothermal Oxidation Behavior of Fe-33Ni-18Cr Alloy in Different Heat Treatment Temperature
p.46
Linking Spectrograph to Mechanical and Physical Properties of X7475 Experimental Alloys Produced from Recycling Beverage Cans for Bumper Beam Applications
p.52
Oxidation Kinetics of Fe-Ni-Cr Alloy at 900 °C
p.58
Performance of Fe-33Ni-18Cr Alloy at High Temperature Oxidation
p.65
Residual Properties of the Drawn Steel Wires for Damage-Based Fretting Fatigue Models of the Wire Ropes
p.71
Role of Alloyed Niobium on the Isothermal Oxidation of Fe-40Ni-24Cr Alloy
p.79
Study of Heat Treatment Effect in MnCoGe Compound on Stucture and Electric Properties
p.86
Temperature Effect on Pseudomonas Aeruginosa Growth and Its Presence on Corrosion of Steel Wire Rope
p.92
The Effect of Al Micro-Alloying on Corrosion and Thermal Properties of Sn-Zn Alloy
p.98

Residual Properties of the Drawn Steel Wires for Damage-Based Fretting Fatigue Models of the Wire Ropes

Article Preview

Abstract:

This paper presents the residual properties and parameters of the damage-based fatigue life prediction models of the steel wire ropes under fretting fatigue conditions. The damage mechanics-based approach is employed to develop the predictive method for the reliability of the steel wire ropes. The elastic modulus is dependent on the fatigue load condition and the accumulated number of the load cycles. The characteristic degradation of the Young’s modulus of drawn steel wires is established through the phenomenological presentation of the interrupted fatigue test data. The samples are given a quasi-static loading followed by a block cyclic loading with various stress amplitudes and ratios. The residual Young’s modulus is calculated after each block of cycles. The effect of the different loading condition with the amplitude and mean stress on the measured fatigue life of a single wire is presented using the life parameter, χ. The residual Young’s modulus data are presented in terms of normalized quantities. Significant reduction in the elastic modulus due to fatigue is exhibited after enduring 70% of the fatigue life of the material. The fitting constants are obtained, and the fitted equation is used to describe the degradation of Young’s modulus at N number of cycles. Subsequently, the data can be applied to predict the fatigue-life of steel wire ropes and assess its reliability through fretting-induced damage models.

You might also be interested in these eBooks
Development and Investigation of Materials Using Modern Techniques II View Preview

Info:

Periodical:

Materials Science Forum (Volume 1010)

Pages:

71-78

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.1010.71

Citation:

Cite this paper

Online since:

September 2020

Authors:

Maslinda Kamarudin, Zaini Ahmad, Mohd Nasir Tamin*

Keywords:

Fatigue-Life Prediction, High Cycle Fatigue, Reliability, Steel Wire Rope, Young’s Modulus

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2020 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

References

[1] H. Mouradi, A. El Barkany, and A. El Biyaali, Steel wire ropes failure analysis: Experimental study,, Eng. Fail. Anal., vol. 91, p.234–242, Sep. (2018).

DOI: 10.1016/j.engfailanal.2018.04.019

Google Scholar

[2] P. Peterka, J. Krešák, S. Kropuch, G. Fedorko, V. Molnar, and M. Vojtko, Failure analysis of hoisting steel wire rope,, Eng. Fail. Anal., vol. 45, p.96–105, Oct. (2014).

DOI: 10.1016/j.engfailanal.2014.06.005

Google Scholar

[3] M. Raoof and I. Kraincanic, Determination of wire recovery length in steel cables and its practical applications,, Comput. Struct., vol. 68, no. 5, p.445–459, Sep. (1998).

DOI: 10.1016/s0045-7949(98)00088-1

Google Scholar

[4] J. M. Walton, Developments in steel cables,, J. Constr. Steel Res., vol. 39, no. 1, p.3–29, Aug. (1996).

Google Scholar

[5] P. R. N. Childs, Wire rope. Butterworth-Heinemann, (2019).

Google Scholar

[6] S. Salleh, M. A. Abdullah, M. F. Abdulhamid, and M. N. Tamin, Methodology for reliability assessment of steel wire ropes under fretting fatigue conditions,, J. Mech. Eng. Sci., vol. 11, no. 1, p.2488–2502, (2017).

DOI: 10.15282/jmes.11.1.2017.8.0229

Google Scholar

[7] M. Giglio and A. Manes, Life prediction of a wire rope subjected to axial and bending loads,, Eng. Fail. Anal., vol. 12, no. 4, p.549–568, Aug. (2005).

DOI: 10.1016/j.engfailanal.2004.09.002

Google Scholar

[8] M. Raoof and T. J. Davies, Axial fatigue design of sheathed spiral strands in deep water applications,, Int. J. Fatigue, vol. 30, no. 12, p.2220–2238, Dec. (2008).

DOI: 10.1016/j.ijfatigue.2008.05.002

Google Scholar

[9] D. Zhao, S. Liu, Q. Xu, F. Shi, W. Sun, and L. Chai, Fatigue life prediction of wire rope based on stress field intensity method,, Eng. Fail. Anal., vol. 81, p.1–9, Nov. (2017).

DOI: 10.1016/j.engfailanal.2017.07.019

Google Scholar

[10] J. Hansel and W. Oleksy, Life of wire ropes based on stresses,, Wire Ind., p.391–394, (1986).

Google Scholar

[11] M. Kamal and M. M. Rahman, Fatigue life estimation models: a state of the art,, Int. J. Automot. Mech. Eng., vol. 9, no. June, p.1599–1608, (2014).

DOI: 10.15282/ijame.9.2013.10.0132

Google Scholar

[12] M. Mahmud, S. Abdullah, M. F. M. Yunoh, A. K. Ariffin, and Z. M. Nopiah, Damaging fatigue cycles determination for random service loadings using mixed Weibull analysis,, Int. J. Automot. Mech. Eng., vol. 13, no. 3, p.3628–3641, (2016).

Google Scholar

[13] D. Norske Veritas, Offshore Standard Position Mooring,, (2004).

Google Scholar

[14] N. Tamin, N. Ahmad, and M. F. Abdulhamid, Methodology for Fatigue Life Prediction of Steel Wire Ropes,, Final report, Kiswire-UTM Contract Research Project No. 4C043, Universiti Teknologi Malaysia, (2015).

Google Scholar

[15] Y.-C. Xiao, S. Li, and Z. Gao, A continuum damage mechanics model for high cycle fatigue,, Int. J. Fatigue, vol. 20, no. 7, p.503–508, Aug. (1998).

DOI: 10.1016/s0142-1123(98)00005-x

Google Scholar

[16] A. Ghosh, B. Leonard, and F. Sadeghi, A stress based damage mechanics model to simulate fretting wear of Hertzian line contact in partial slip,, Wear, vol. 307, no. 1–2, p.87–99, Sep. (2013).

DOI: 10.1016/j.wear.2013.08.008

Google Scholar

[17] ISO1302, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation,, (2002).

DOI: 10.3403/02567354u

Google Scholar

[18] B. Roy, Surface roughness,, roymech.co.uk, 2013. [Online]. Available: https://www.roymech.co.uk/Useful_Tables/Surface_Texture/Sur_Fin_Values.html. [Accessed: 16-Jun-2019].

Google Scholar

[19] T. Adam, G. Fernando, R. F. Dickson, H. Reiter, and B. Harris, Fatigue life prediction for hybrid composites,, Int. J. Fatigue, vol. 11, no. 4, p.233–237, Jul. (1989).

DOI: 10.1016/0142-1123(89)90306-x

Google Scholar

[20] N. Gathercole, H. Reiter, T. Adam, and B. Harris, Life prediction for fatigue of T800/5245 carbon-fibre composites: I. Constant-amplitude loading,, Int. J. Fatigue, vol. 16, no. 8, p.523–532, Jan. (1994).

DOI: 10.1016/0142-1123(94)90478-2

Google Scholar

[21] S. Beretta and S. Matteazzi, Short crack propagation in eutectoid steel wires,, Int. J. Fatigue, vol. 18, no. 7, p.451–456, Oct. (1996).

DOI: 10.1016/0142-1123(96)00014-x

Google Scholar