Effect of Different Production Processes on Metallic Composite Phase Change Materials for Thermal Energy Storage

Abstract:

Phase Change Materials (PCMs) can be applied in Thermal Energy Storage and Thermal Management systems, exploiting the storage and release of latent heat associated to a phase transition. Among them, metallic PCMs can be used at medium and high temperatures (i.e. above 150°C), storing higher heat per unit volume at higher temperatures with respect to the most widely investigated polymeric and salt-based PCMs. Miscibility Gap Alloys (MGAs) can be used to obtain multiple-phase mixtures in which the active phase (the actual PCM) is mixed to a second, high-melting temperature phase, with negligible interaction between them. These can actually be considered as fully metallic composite materials specifically developed for thermal management. Suitable microstructures can prevent leakage of active phase when the solid-liquid transition occurs, resulting in a form-stable PCM (FS-PCM). However, obtaining these microstructures it is not trivial. The present study focuses on a solid-liquid FS-PCM consisting of a ‘classical’ fully metallic FS-PCM, an Al-Sn based MGAs produced by powder metallurgy. The goal was to evaluate the effect of different production processes on thermal and mechanical behaviour of the PCM. Particularly, powder metallurgy routes including both simple mixing and ball milling were compared and further combined. Moreover, several compression and sintering conditions were considered, also substituting Al powders with Al-alloy powders, in order to optimize the material microstructures in view of suitable thermal and mechanical properties. Finally, the casting route with a rapid solidification approach was investigated for the same alloy.

• Periodical: Materials Science Forum (Volume 1016)
• Pages: 359-365
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.1016.359
• Online since: January 2021
• Authors: Chiara Confalonieri*, Elisabetta Gariboldi
• Keywords: Al2618-Sn, Al-Sn, Metallic Composite Phase Change Materials, Powder Metallurgy, Rapid Solidification, Thermal Energy Storage

References

[1] S. Reed, H. Sugo, E. Kisi, High temperature thermal storage materials with high energy density and conductivity, Sol. Energy. 163 (2018) 307–314.

DOI: 10.1016/j.solener.2018.02.005

[2] H. Nazir, M. Batool, F.J. Bolivar Osorio, M. Isaza-Ruiz, X. Xu, K. Vignarooban, P. Phelan, Inamuddin, A.M. Kannan, Recent developments in phase change materials for energy storage applications: A review, Int. J. Heat Mass Transf. (2019).

DOI: 10.1016/j.ijheatmasstransfer.2018.09.126

[3] K. Pielichowska, K. Pielichowski, Phase change materials for thermal energy storage, Prog. Mater. Sci. 65 (2014) 67–123.

DOI: 10.1016/j.pmatsci.2014.03.005

[4] M. Kuta, T.M. Wójcik, Phase change materials in energy sector - applications and material requirements, EPJ Web Conf. 92 (2015) 2043.

DOI: 10.1051/epjconf/20159202043

[5] G. Wei, G. Wang, C. Xu, X. Ju, L. Xing, X. Du, Y. Yang, Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review, Renew. Sustain. Energy Rev. 81 (2018) 1771–1786.

DOI: 10.1016/j.rser.2017.05.271

[6] A.S. Fleischer, Thermal Energy Storage Using Phase Change Materials - Fundamentals and Applications, 1st ed., Springer, Cham, 2015. doi:https://doi.org/10.1007/978-3-319-20922-7.

[7] C. Zhou, S. Wu, Medium- and high-temperature latent heat thermal energy storage: Material database, system review, and corrosivity assessment, Int. J. Energy Res. 43 (2019) 621–661.

DOI: 10.1002/er.4216

[8] H. Sugo, E. Kisi, D. Cuskelly, Miscibility gap alloys with inverse microstructures and high thermal conductivity for high energy density thermal storage applications, Appl. Therm. Eng. 51 (2013) 1345–1350.

DOI: 10.1016/j.applthermaleng.2012.11.029

[9] X. Liu, M.Q. Zeng, Y. Ma, M. Zhu, Promoting the high load-carrying capability of Al–20wt%Sn bearing alloys through creating nanocomposite structure by mechanical alloying, Wear. 294–295 (2012) 387–394.

DOI: 10.1016/j.wear.2012.07.021

[10] E. Gariboldi, M. Perrin, Metallic Composites as Form-Stable Phase Change Alloys, in: THERMEC 2018, Trans Tech Publications, 2019: p.1966–1971.

DOI: 10.4028/www.scientific.net/msf.941.1966

[11] C. Confalonieri, Z. Li, E. Gariboldi, Metallic Form-Stable Phase Change Materials for Thermal Energy Storage and Management: general features and effect of manufacturing process on thermal response and stability, La Metall. Ital. - Int. J. Ital. Assoc. Metall. 7/8 (2019) 12–20.

[12] Al2618 Datasheet, (n.d.). http://www.matweb.com/search/datasheet_print.aspx?matguid= f6d0bebbfc7248838243b7fa141431ba(accessed January 22, 2020).

[13] Al Datasheet, (n.d.). http://www.matweb.com/search/DataSheet.aspx?MatGUID= 0cd1edf33ac145ee93a0aa6fc666c0e0&ckck=1 (accessed January 22, 2020).