Observation of the Effect of Periodic Vibration on the Phase Transition of VO2 Thin Film

Article Preview

Abstract:

The impact of periodic mechanical vibration on the phase transitional property of VO2 based thermal sensing thin film synthesized on AT-cut quartz has been investigated in this paper. VO2 were found to go through phase transition due to effect of heat, and display reduction of film resistivity and transmitted infrared power at a specific transition temperature, typically around 60-70°C. But sometimes the transmitted infrared power has been observed to decrease at a significantly lower temperature compared to the similar phenomenon for resistivity reduction. In order to correctly validate the transition temperature, the derivative of the transmitted optical power signal is measured, and it has been found that this measurement is experimentally possible when the VO2 film is subjected to a moderate to high frequency periodic mechanical vibration. It has also been observed that the variation of the mechanical vibration frequency has a direct effect on the derivative signal, which indicates the sharpness of the phase transition and magnitude of change of the transmitted infrared power depending on the width of the extrema lobe of the derivative.

You might also be interested in these eBooks

Info:

Periodical:

Materials Science Forum (Volume 1199)

Pages:

91-96

Citation:

Online since:

August 2026

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2026 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] M. A. Baqir, P. K. Choudhury, On the VO2 metasurface-based temperature sensor, J. Opt. Soc. Am. 36 (2019), F123–F130.

Google Scholar

[2] Y. Cui, Y. Ke, C. Liu, Z. Chen, N. Wang, L. Zhang, Y. Zhou, S. Wang, Y. Gao, Y. Long, Thermochromic VO2 for Energy-Efficient Smart Windows, Joule Cellpress Rev. 2 (2018), 1707–1746.

DOI: 10.1016/j.joule.2018.06.018

Google Scholar

[3] B. N. Masina, A. A. Akande, B. Mwakikunga, Effect of laser wavelength in PLD in the orientation and thermochromic properties of VO2 (M1) on a glass substrate, MRS Adv., 5 (2020), 1121–1132.

DOI: 10.1557/adv.2020.161

Google Scholar

[4] J. Lappalainen, S. Heinilehto, S. Saukko, V. Lantto, H. Jantunen, Microstructure dependent switching properties of VO2 thin films, Sens. Actuators, 142 (2018), 250–255.

DOI: 10.1016/j.sna.2007.05.002

Google Scholar

[5] A. F. Azarnaminy, R. R. Mansour, Reconfigurable SAW Resonators and Tunable Filters Using Monolithically Integrated VO2 Switches, IEEE Transactions on Microwave Theoy and Techniques, 71 (2023), 181-192.

DOI: 10.1109/tmtt.2022.3222303

Google Scholar

[6] A. A. M. Ralib; N. F. M. Razali; M. Chatras; A. N. Nordin; F. D. A. Rahman; A. Pothier, Enhancement of Quality Factor in ST -cut Quartz Surface Acoustic Wave Devices by using Different Numbers of IDTs and Wavelengths for gas sensing," 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Kuala Lumpur, Malaysia, 2023, pp.1-4.

DOI: 10.1109/i2mtc53148.2023.10175929

Google Scholar

[7] S. Azad, D. Gajula, G. Koley, Synthesis and characterization of VO2 thin films on piezoelectric substrates, Thin Solid Films, 742 (2022), 139055.

DOI: 10.1016/j.tsf.2021.139055

Google Scholar

[8] S. Azad, D. Gajula, N. Sapkota, A. Rao, G. Koley, Infrared Transmission Characteristics of Phase Transitioning VO2 on Various Substrates, Micromachines, 13(5) (2022), 812.

DOI: 10.3390/mi13050812

Google Scholar

[9] J. Chen, X. Tian, L. Ye et al. High-Performance VO2 Thin Film Prepared Via Room-Temperature-Deposition and Air-Annealing Treatment, J. Electron. Mater. 54 (2025), 7935-7941.

DOI: 10.1007/s11664-025-12165-2

Google Scholar

[10] D. Li, M. Li, J. Pan, Y. X. Zhang, G. H. Li, Thermal oxidation of V2O3 nanocrystals: a template method for the fabrication of monoclinic phase VO2 nanocrystals, J. Nanosci. Nanotechnol. 13 (2013) 5469-5473.

DOI: 10.1166/jnn.2013.7493

Google Scholar

[11] S. Azad, D. Gajula, M. H. Prio, L. Muthusamy, J. K. Miller, E. G. Johnson, G. Koley, VO2 thin film enabled free space modulation of infrared light using pulsed electric field, ACS Photonics, 11 (5) (2024), 2138-2149.

DOI: 10.1021/acsphotonics.4c00489

Google Scholar

[12] R. T. Singh, D. Khan, D. Gajula, F. Bayram, and G. Koley, Synthesis and characterization of VO2 on III nitride thin films using low pressure chemical vapor deposition for sensing applications, Proceedings of IEEE 13th Nanotechnology Materials and Devices Conference (2018), 1-4.

DOI: 10.1109/nmdc.2018.8605912

Google Scholar

[13] S. Azad, R. Singh, M. Munna, F. Bayram, D. Khan, H. Li, and G. Koley, Investigation of VO2 thin film grown on III-nitride epitaxial layer, Proceedings of IEEE Nano (2020), 315-318.

DOI: 10.1109/nano47656.2020.9183713

Google Scholar

[14] J. J. Suter, Piezoelectric properties of quartz crystal resonators below 10 K, Cryogenics, 30 (6) (1990), 547-548.

DOI: 10.1016/0011-2275(90)90058-k

Google Scholar

[15] C. L. Stetzkamp, T. V. Tsankov, U. Czarnetzki, Lock-in technique for precise measurement of ion distribution functions, J. Phys. D: Appl. Phys. 54 (2021) 305202.

DOI: 10.1088/1361-6463/abf8f1

Google Scholar

[16] K. Sowka, M. Weel, S. Cauchi, L. Cockins, A. Kumarakrishnan, A home-built lock-in amplifier for laser frequency stabilization, Can. J. Phys. 83 (2005), 907-918.

DOI: 10.1139/p05-049

Google Scholar