Formation of Shear Texture and Ultra-Fine Grains during Equal Angular Channel Rolling and Subsequent Annealing in AA 3003 Sheet

Abstract:

The evolution of texture and microstructure during the equal channel angular rolling (ECAR) and subsequent annealing in aluminum alloy 3003 sheets was investigated. The tools of ECAR were designed to provide a constant shear deformation of the order of 0.5 per passage while preserving the original sheet shape. Samples of the aluminum alloy 3003 sheets were repeatedly deformed by ECAR up to twelve passages. Shear textures developed after the first passage of ECAR. However, the intensity of shear texture components decreased with increasing number of ECAR passages. After a large number of ECAR passages, a random texture developed at the expense of shear texture components. Observations by TEM and EBSD revealed that the degree of misorientations within the deformed grains increased with increasing number of ECAR passages. After recrystallization annealing, samples deformed by ECAR displayed pronounced {111}//ND fiber orientations. The annealed sheets comprising of ultra-fine grains were successfully produced in the samples deformed by a large number of ECAR passages.

• Periodical: Materials Science Forum (Volumes 449-452)
• Pages: 873-876
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.449-452.873
• Online since: March 2004
• Authors: Moo Young Huh, J.P. Lee, Jae Chun Lee, Jong Woo Park, Young Hoon Chung
• Keywords: Equal Channel Angular Rolling (ECAR), Recrystallization, Repeated Shear Deformation RSD, Severe Plastic Deformation (SPD), Texture, Ultrafine Grained

References

[1] R.Z. Valiev, N.A. Krasilnikov and N.K. Tsenev: Mater. Sci. Eng. Vol. A137 (1991), p.35.

[2] Z. Horita, T. Fujinami and T.G. Langdon: Mater. Sci. Eng. Vol. A318 (2001), p.34.

[3] K.H. Kim and D.N. Lee: Acta mater. Vol. 49 (2001), p.2583.

[4] M.Y. Huh, Y.S. Cho and O. Engler: Mater. Sci. Eng. Vol. A247 (1998), p.152.

[5] O. Engler, H.C. Kim and M.Y. Huh: Mater. Sci. Technol. Vol. 17 (2001), p.75.

[6] T. Sakai, S. Hamada and Y. Saito: Proc. of ICAA-6 (1998), p.1161.

[7] J.C. Lee, H.K. Seok, J.H. Han and Y.H. Chung: Mater. Res. Bull. Vol. 36 (2001), p.997.

[8] Y.H. Chung, H.D. Kim, H.T. Jeong, O. Engler and M.Y. Huh: Mater. Sci. Forum Vol. 396-402 (2002), p.475 Journal Title and Volume Number (to be inserted by the publisher).

[9] H.J. Bunge: Texture Analysis in Materials Science (Butterworths London 1982).