Fast Uniform Mixing & Controllable Colloidal Forming of Ceramics

Tian Ma; Yong Huang; Jin Long Yang; Li Ming Zhang

doi:10.4028/www.scientific.net/MSF.475-479.1305

Paper Titles

Three-Dimensional Simulation of Sintering of Ceramics
p.1287

Study on Densification Behavior and Microwave Attenuation Characteristics in AlN/SiC Composites
p.1291

High-Temperature Strength of Directionally Solidified Al₂O₃/YAG/ZrO₂ Eutectic Composite
p.1295

Processing and Microstructure of an All-Oxide Ceramic Composite
p.1301

Fast Uniform Mixing & Controllable Colloidal Forming of Ceramics
p.1305

Gelcasting of Alumina Ceramic in Presence of Water-Soluble Polymer
p.1309

Origin, Transformation and Control of the Inner Stress in the Green Bodies Prepared by Ceramic Colloidal Forming Processing
p.1313

Study on Elimination of Surface-Exfoliation and Crack of ZrO₂ Green Body of Gelcasting with Water-Solubility Macromolecule
p.1317

Pretreatment Processing of Gelcast Green Body before Debinding
p.1321

HomeMaterials Science ForumMaterials Science Forum Vols. 475-479Fast Uniform Mixing & Controllable Colloidal...

Fast Uniform Mixing & Controllable Colloidal Forming of Ceramics

Abstract:

A process of fast uniform mixing & controllable colloidal forming of ceramics was invented to thoroughly avoid the crucial effect of temperature on colloidal forming of ceramics. The ceramic suspension was divided into two components A and B. The monomer was added into A, and the initiator was added into B. Under this condition, there were no reactions in separate A or B because of segregation of the monomer and the initiator. Both of the suspensions could keep good fluidity until they were mixed quickly and uniformly. The mixture would fast solidify under a determined pressure. The highly automatic equipment also had been developed for this process.