Effect of Substrate Porosity on the Coating Adhesion of Iron Sintered Plated Parts with Infiltration Pretreatment

Abstract:

Article Preview

Plating of the sintered components has some problems due to interconnected porosities in those parts. In this research, iron-based sintered specimens infiltrated with copper were used. The pretreated specimens were then plated with nickel and the adhesion of coated layer to substrate was investigated. The results showed that the adhesion of coated layer in copper infiltrated iron sintered components is independent of substrate initial density.

Info:

Periodical:

Materials Science Forum (Volumes 534-536)

Edited by:

Duk Yong Yoon, Suk-Joong L. Kang, Kwang Yong Eun and Yong-Seog Kim

Pages:

953-956

Citation:

M. Etaat et al., "Effect of Substrate Porosity on the Coating Adhesion of Iron Sintered Plated Parts with Infiltration Pretreatment ", Materials Science Forum, Vols. 534-536, pp. 953-956, 2007

Online since:

January 2007

Export:

Price:

$38.00

[1] P. Leisner, R.C. Leu: Electroplating of Porous PM Compacts, Powder Metallurgy, Vol. 40, No. 3 (1997), pp.207-210.

DOI: https://doi.org/10.1179/pom.1997.40.3.207

[2] S. Rossi, L. Fedrizzi, F. Deflorian: Characterization of Commercial Metallic Coatings for Corrosion Protection of P/M Parts, International Journal of Powder Metallurgy, Vol. 40, No. 4 (2004), pp.33-40.

[3] T. Bell: Surface Treatment and Coating of PM Components, Powder Metallurgy, Vol. 34, No. 4 (1991), pp.253-258.

DOI: https://doi.org/10.1179/pom.1991.34.4.253

[4] S. Badbury: Powder Metallurgy Equipment Manual, Vol. 3 (1986), pp.256-260.

[5] R.C. Leu, L. Alting: World Conference on Powder Metallurgy (1990), pp.280-285.

[6] M. Dustoor, J. Eggleston: Metals Finishing and Coating, Tools and Manufacturing Engineering Handbook, Vol. 3, No. 3 (1992), pp.3-6.

[7] M. J. Nash: Surface Treatments for Corrosion Protection of Sintered Iron Parts, Powder Metallurgy, Vol. 33, No. 1 (1990), pp.22-23.

[8] C. G. Goetzel: Infiltration, ASM Metals Handbook, Ed. 9, Vol. 7 (1982), pp.551-562.

[9] H. E. Boyer: ASM Metals Handbook, Ed. 9, Vol. 7 (1984), pp.459-461.

[10] Singh, D. & Dube, R. K. 1995: Electroless Nickel Coating of Sintered Iron Compacts, Powder Metallurgy, Vol. 38, No. 1 (1995), pp.52-54.

DOI: https://doi.org/10.1179/pom.1995.38.1.52