Preparation of High Silicon Steel by EB-PVD

Xiao Li; Xiao Dong He; Yao Li; Yue Sun

doi:10.4028/www.scientific.net/MSF.546-549.1813

Paper Titles

Numerical Analysis of EB-PVD Thermal Barrier Coatings under Thermal-Mechanical Coupled Environment
p.1795

The Effects of Rare Earth Elements on Corrosion Resistance of Sol-Gel Coatings for 2024 Aluminum Alloy
p.1801

Structure and Anti-Corrosion of Tri-Layer Ni-P Amorphous Alloy Coating Prepared in the Same Bath
p.1805

Study on Interfacial Characterization and Mechanical Properties of Plasma-Sprayed Tungsten Coatings
p.1809

Preparation of High Silicon Steel by EB-PVD
p.1813

Melting Temperatures of Several Oxides under Pressure
p.1817

Effects of Ti-1023 Anodized Coating on Corrosion Behavior of Ti-1023/30CrMnSiA and Ti-1023/LY12 Galvanic Couples
p.1821

Tiny Crystals Surviving above the Melting Temperature and Acting as Growth Nuclei of the High-Tc Superconductor Microstructure
p.1827

High-Strength Nb₃Sn Wire Development for Compact Superconducting Magnets
p.1841

HomeMaterials Science ForumMaterials Science Forum Vols. 546-549Preparation of High Silicon Steel by EB-PVD

Preparation of High Silicon Steel by EB-PVD

Abstract:

In the process of preparation of high silicon steel by EB-PVD, the effect of distance between ingot and substrate on the weight percent of silicon in the silicon steel was investigated through specially designed experiment. Energy dispersive spectroscopy (EDS), optical microscope (OM), scanning electron microscopy (SEM), x-ray diffraction (XRD) were used to characterize the weight percent of silicon, microstructure, crystal grain size and phase of the high silicon steel. The experimental results show that the weight percent of silicon in the silicon steel decreases with increasing of the distance between ingot and substrate, when the distance is about 415 mm, high silicon steel can be fabricated by EB-PVD. The microstructure of the high silicon steel was composed of columnar crystal grain, the size of the crystal is about 25-50 μm. The material back to the substrate side is composed of B2 and exhibits strong {400} texture.

You might also be interested in these eBooks

Progress in Light Metals, Aerospace Materials and Superconductors

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 546-549)

Pages:

1813-1816

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.546-549.1813

Citation:

Cite this paper

Online since:

May 2007

Authors:

Xiao Li, Xiao Dong He, Yao Li, Yue Sun

Keywords:

EB-PVD, High Silicon Steel, Microstructure, Texture

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] R. Li, Q. Shen et al: Journal of Magnetism and Magnetic Materials Vol. 281(2004), p.135.

Google Scholar

[2] Y. Takada, M. Abe, S. Masuda, and J. Inagaki:J. Appl. Phys Vol. 64(1988), p.5367.

Google Scholar

[3] H. Haiji, K. Okada, T. Hiratani et al: Journal of Magnetism and Magnetic Materials Vol. 160 (1996), p.109.

Google Scholar

[4] H.B. Xu, X.S. Jin, et al: Thin Solid Film Vol. 375(2000), p.296.

Google Scholar

[5] X.F. Bi, W.H. Lan, et al: Journal of Magnetism and Magnetic Materials Vol. 261(2003), p.166.

Google Scholar

[6] X.F. Bi, J.J. Wang, et al: Journal of Magnetism and Magnetic Materials Vol. 281(2004), p.290.

Google Scholar

[7] B.A. Movchan and A.V. Demchishin: Fiz. Metall. Metalloved Vol. 28 (1969), p.83 Fig. 7 XRD patterns (a) back to substrate (b) close to substrate side 50μm Fig. 6 Cross section microstructure of high silicon steel.

Google Scholar