Improving Corrosion Resistance of MRI 230D Mg Alloy by Hybrid Coating of Laser Surface Alloying and Plasma Electrolytic Oxidation

Abstract:

A permanent mould cast creep resistant MRI 230D Mg alloy was laser surface alloyed (LSA) with Al and Al₂O₃ in order to improve its wear and corrosion resistance. However, this treatment was successful only in improving wear resistance but not corrosion resistance due to the presence of micro−cracks in the coated layer, which has been discussed in an earlier paper. The LSA coated Mg alloy has been further subjected to plasma electrolytic oxidation (PEO) treatment in alkaline silicate electrolyte in order to cover those micro−cracks and improve corrosion resistance, which is discussed in the present manuscript. For comparison, the PEO coating has also been applied on the as−cast MRI 230D Mg alloy. The microstructural characterization of coatings and corroded surfaces was carried out by scanning electron microscope and X−ray diffraction. Electrochemical corrosion tests were conducted in 3.5 wt% NaCl solution having neutral pH to investigate the corrosion behavior. The LSA coatings consisted mainly of β (Mg₁₇Al₁₂) phase, the coatings produced by PEO treatment on MRI 230D Mg alloy consisted mainly of Mg₂SiO₄ phase, and hybrid coatings of PEO on LSA consisted of Mg₂SiO₄ and MgAl₂O₄ phases in the PEO layer. Scanning electron micrographs of the cross−section revealed that the PEO treatment covered the micro−cracks present in the LSA and corrosion tests revealed that it improved the corrosion resistance, though not to the extent of the corrosion resistance of the PEO coated MRI 230D Mg alloy. All the samples exhibited localized form of corrosion.

• Periodical: Materials Science Forum (Volumes 706-709)
• Pages: 1209-1214
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.706-709.1209
• Online since: January 2012
• Authors: G. Rapheal, Subodh Kumar, Carsten Blawert, Narendra B. Dahotre
• Keywords: Corrosion, Laser Surface Alloying, Magnesium Alloy, Microstructure, Plasma Electrolytic Oxidation (PEO)

References

[1] B.L. Mordike, T. Ebert, Magnesium: properties-applications, Mater. Sci. Engg A, 302 (2001) 37-45.

[2] F.H. Froes, D. Eliezer, E. Aghion, The science, technology and applications of magnesium, JOM, 50 (1998) 30-34.

DOI: 10.1007/s11837-998-0411-6

[3] B. Bronfin, E. Aghion, S. Schumann, P. Bohling, K.U. Kainer, Magnesium alloy for high temperature applications, US patent, 6, 139, 651, (2000).

[4] B. Bronfin, N. Moscovitch, New magnesium alloys for transmission parts, Metal Sci. and heat treatment, 48 (2006) 479-486.

DOI: 10.1007/s11041-006-0121-z

[5] E. K-Asibu Jr., Principles of Laser Materials Processing, John Wiley & Sons, New Jersey, (2009).

[6] N.B. Dahotre, S.P. Harimkar, Laser Fabrication and Machining of Materials, Springer Science + Business Media, New York, (2008).

[7] J.A. Curran, T.W. Clyne, Thermo-physical properties of plasma electrolytic oxide coatings on aluminum, Surf. Coat. Technol, 199 (2005) 168-176.

DOI: 10.1016/j.surfcoat.2004.09.037

[8] A. Ghasemi, V.S. Raja, C. Blawert, W. Dietzel, K.U. Kainer, Study of the structure and corrosion behaviour of PEO coatings on AM50 magnesium alloy by electrochemical impedance spectroscopy, Surf. Coat. Technol, 202 (2008) 3513-3518.

DOI: 10.1016/j.surfcoat.2007.12.033

[9] G. Rapheal, S. Kumar, C. Blawert, N.B. Dahotre, Laser surface alloying of a creep resistant magnesium alloy MRI 230D with Al and Al2O3, Magnesium Technology 2010, TMS (The Minerals, Metals & Materials Society), 2010, pp.161-166.

DOI: 10.4028/www.scientific.net/msf.706-709.1209